Jump to content
ryan

Hanna Code

Recommended Posts

i tried using the shortcode module, and it is promising, and quite different than hanna codes; shortcodes allow you to have an opening and closing tag so you can enclose things within, which allows you to use them for things like tabs and accordions;

hanna code is very usable/flexible, but it doesn't know about things between each instance of itself (no opening/closing)...

also the shortcodes module doesn't allow for using more than 1 shortcode on a page.. i think it needs more work;

but it would be good if we could have a shortcodes module that works as well as the wordpress shortcodes, since there are still some rare use cases where shortcodes can be useful...

custom fields replaces and is superior for the most part to the concept of shortcodes, which is probably why the need has not come up much on PW.

And end users always mess up with shortcodes, like putting them in the wrong place in the RTE (like inside a heading), or forgetting to use the closing tag, and consequently break the layout on pages too easily...

  • Like 1

Share this post


Link to post
Share on other sites

I have never even considered using anything like Hanna code or shortcodes for our clients. I think what would make them usable would be making them appear as a block in editor, instead of plain text.

  • Like 1

Share this post


Link to post
Share on other sites

I have never even considered using anything like Hanna code or shortcodes for our clients. I think what would make them usable would be making them appear as a block in editor, instead of plain text.

Actuall in my testing phase of PW - there are much less usecases for such little snippets because you could use simple a extra field or do prefered PHP direkt in the page template....but in other systems you only had some blocks or one Wysiwyg per pages and such snippets catch up some content or bring some logic to a wysiwyg the user doesn't have to think about it.

For example you could easy setup some Hanna codes and implement it fast via import on new different websites....reusable codesnippets are the usecase.

Iportant question if i wanna make them work in the template i have to call the process i think??

Next HannaCode from my testings is a simple sitemap:

//:Sitemap: creates a simple sitemap (Snippet find in the forum from soma)
//:Use: [[sitemap]]

Just import this one:

!HannaCode:sitemap: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/!HannaCode

Have Fun - mr-fan

  • Like 2

Share this post


Link to post
Share on other sites
I have never even considered using anything like Hanna code or shortcodes for our clients. I think what would make them usable would be making them appear as a block in editor, instead of plain text.

 Exactly my thought. And loaded/configurable per template, so that only hanna codes are shown that makes sence in that template. 

  • Like 1

Share this post


Link to post
Share on other sites

Hi all

I hope there's someone here that can help me.. I've set up this site (www.sejero-festival.dk) on my localhost and Hanna Code works excellent.

However, and I've tried two different hosts now, when I deploy the site, the Hanna Code module fails miserably when I try to go to the setup part :

Screenshot%202014-06-16%2014.08.42.png

One of the hosts has the following specs:

PHP: 5.3.28

MySQL: 5.5.37

Does anyone have a clue what might cause this error?

Share this post


Link to post
Share on other sites

For some reason I cannot get hanna code to work with php. I can get html to work just pine but php will not.

Here is my code

<?php
 
foreach($page->children as $product) {
 
    if($product->image) {
       // $image = $product->image->width(150);
        $img = "<img src='{$image->url}' alt='{$product->title}' class='flt-left-img' />";
    } 
    
    else {
     
        $img = "<span class='image_placeholder'>Image not available</span>";
    } 
 
    echo "
        $img
        <h3>{$product->title}</h3>
        <p>{$product->product_description}</p>
        <hr />
        ";
}
?>
 
 
 
The only thing that will output on the page is the product description but all other content from the body disappears.
 
Driving me nuts so any help would be great.

Share this post


Link to post
Share on other sites

I hope there's someone here that can help me.. I've set up this site (www.sejero-festival.dk) on my localhost and Hanna Code works excellent.

However, and I've tried two different hosts now, when I deploy the site, the Hanna Code module fails miserably when I try to go to the setup part :

One of the hosts has the following specs:

PHP: 5.3.28

MySQL: 5.5.37

Does anyone have a clue what might cause this error?

Is this still a problem? Does anything else work, i.e. is this the only place that's broken on this site?

Sounds like your database wasn't reachable at this point, but I'd imagine that causing issues elsewhere too. Unless, perhaps, it's somehow related to PHP's mysqli extension on that server (just about all core features have already been migrated to PDO instead).

For some reason I cannot get hanna code to work with php. I can get html to work just pine but php will not.

Here is my code

<?php
 
foreach($page->children as $product) {
 
    if($product->image) {
       // $image = $product->image->width(150);
        $img = "<img src='{$image->url}' alt='{$product->title}' class='flt-left-img' />";
    } 
    
    else {
     
        $img = "<span class='image_placeholder'>Image not available</span>";
    } 
 
    echo "
        $img
        <h3>{$product->title}</h3>
        <p>{$product->product_description}</p>
        <hr />
        ";
}
?>
 
 
 
The only thing that will output on the page is the product description but all other content from the body disappears.

Only weird thing I can spot in your code right away is that you've got $image = ... commented out, yet on the next line you try to use $image->url, which obviously won't be available here. I'm assuming that this was just something you did for testing and forgot there.

When you're saying that only output is the product description, it's coming from this Hanna Code snippet, right? Are you seeing empty <h3></h3> tags and then <p></p> tags with product description inside them and nothing else, or..?

I'm not really sure what you're referring to when you say that all other content from the "body" disappears; <body> element of your page, $page->body, or something entirely different? If you view the source of the page, is there anything weird there -- or in your log files, either in site/assets/logs/errors.txt or Apache logs?

Share this post


Link to post
Share on other sites

oops I didn't mean to have that commented out. Its not in my code, but that was a copy that I forgot to uncomment. 

I am not seeing empty <h3> tags or <p> tags and yes the product description is coming from the hanna code. In fact the only thing that showing on the page is the product description from the hanna code. Everything else disappears including all paragraphs and everything else in the textarea $page->body. There is nothing weird in the source. It has to be the way this php is whitten I think because I am using other php for another hanna code and it works.  

this is the other code that works

<?php foreach ($page->children() as $c): ?>

<li><a href="<?=$c->url;?>"><img src="<?=$c->listImage->url;?>" alt="<?=$c->listImage->description;?>" width="100" height="100"> <?=$c->listImage->description;?> <span>View More</span></a></li>
<? endforeach; ?>

Share this post


Link to post
Share on other sites

Is this still a problem? Does anything else work, i.e. is this the only place that's broken on this site?

Sounds like your database wasn't reachable at this point, but I'd imagine that causing issues elsewhere too. Unless, perhaps, it's somehow related to PHP's mysqli extension on that server (just about all core features have already been migrated to PDO instead).

Yeah it's still a problem. :-(

And now I've tried it on another host with same result. The only two places I've succesfully gotten the Hanna Code module to work were on localhost (yay) and on my Digital Ocean Droplet...

I guess I'll let the owner of the site know, that he can't get that module on the two host masters he wished for. :-)

Share this post


Link to post
Share on other sites

First problem I noticed, two people are asking two separate questions at the same time.

For @kasperwf,

 Hi all

 

I hope there's someone here that can help me.. I've set up this site (www.sejero-festival.dk) on my localhost and Hanna Code works excellent.

However, and I've tried two different hosts now, when I deploy the site, the Hanna Code module fails miserably when I try to go to the setup part :

  One of the hosts has the following specs:

 

PHP: 5.3.28

MySQL: 5.5.37

 

Does anyone have a clue what might cause this error?

 

On your localhost (that is working), what are the following:

ProcessWire version

PHP version

MySQL version

Apache version

Then, what are the same information for both hosts that you have have tried?  Having that information, will allow someone to truly be of help to you.  Thanks.

Share this post


Link to post
Share on other sites

On your localhost (that is working), what are the following:

ProcessWire version

PHP version

MySQL version

Apache version

Then, what are the same information for both hosts that you have have tried?  Having that information, will allow someone to truly be of help to you.  Thanks.

My localhost:

PHP version: 5.4.22

MySQL version: 5.6.10

Apache: Apache/2.2.26 (Unix)

The information for the hosts that doesn't work is the one I wrote earlier. Seems like they both use the exact same setup (as the other, not like mine, the working server). :-I

The info for my VPS that also work is:

PHP: 5.5.9-1ubuntu4

MySQL: I really don't know, because I obviously secured it too well, and I can't even mysql -v it. But it was last month, and it was the newest version, so, yeah. :-)

Apache: Apache/2.4.7 (Ubuntu)

Share this post


Link to post
Share on other sites

This turned out to be an issue with the order of variables returned by core TemplateFile::getArray. It was doing an array_merge which gave preference to API variables, preventing them from being overwritten. Maybe that's a good thing in general, but I don't think we want that limitation. I went ahead and changed it in dev. Now it gives preference to local variables, which enables Hanna Code to provide the behavior it was supposed to. 

Hello,

I fail to make it work. I'm using PW version 2.4.4. TemplateFile.php lines 156-158 are correctly updated:

	public function getArray() {
		return array_merge($this->fuel->getArray(), parent::getArray()); 
	}

My Hanna code is as simple as:

[[page-title]] :

<?php
echo $page->title;

The structure is as follows:

Page texts, with title "Texts" -> Field "Text 1" (Textareas ProField)-> "Some text... " . [[page-title]]

Page product name, with title "Product name"-> API reference to Field "Text 1"

Outputs "Some text... Texts"

Should be "Some text... Product name"

I think it should work, but can´t see the problem. The textareas field has Hanna Code Text Formatter applied.

Thanks,  :rolleyes:

Share this post


Link to post
Share on other sites

I think I am getting caught out by scope - well, I know I am.

I have some text on a page other than the one I am looking at, and I am drawing it in with get()

That text has a hanna code in it that simply echos the page title.

The problem is that it is echoing the page title of the page the code originates from and not from the page I am looking at.

How do I do this so that it gets my current page title, not the page where the text originates from?

Share this post


Link to post
Share on other sites

ummm ... I am halfway there.

by using this for the php for my hanna code <?php echo wire("page")->title; ?> I now get the current page title.

However, I am not getting the rest of the text.

So:

This is my [[pagetitle]] you can see

Is just printing out the page title, not the rest of the words.

Share this post


Link to post
Share on other sites

You don't happend to replace sorounding p tags and the hanna code is inside the text paragraph?

Share this post


Link to post
Share on other sites

Hi Soma, no, I have the replace bit turned off.

I think it is because the textarea that supplies the text, complete with the hanna code reference, is originating on another page.

I am calling it into my template with:

<? echo $pages->get("/servicing/")->service_model_default_text; ?>

Now, if I use a different code, one that pulls the info from a specified field in a specified page, that works fine.

For instance, a code that is:

echo "<span class='phonenumber'>Call {$pages->get("/settings/")->site_phone}</span>";

But if I try and call something from the current page, it goes wrong.

So if I used the code:

echo $page->title;

Simply prints out title of the page where the text originated, but not the rest of the text. if I use wire() it prints out the current page title, but again no text. Debug is not showing errors.

Share this post


Link to post
Share on other sites

Sorry can't really follow what you're doing. Mostly confused why you'd need hanna code at all just for a page title?

Share this post


Link to post
Share on other sites

Basically I have a huge lump of default text in a separate page that is pulled into about 100 pages or so.

The default text needs to pick up values from those pages - product name, price and so on - that will be part of that long default text. The page title is just one of those values.

The easiest way I could see to do it (and easy for the client to understand) was to use bits of hanna code within the text.

Share this post


Link to post
Share on other sites

I have hard time following what code is where and what doesn't work.

Share this post


Link to post
Share on other sites

Sorry, Soma, I should have explained it better.

I have a page called services that has a CKEditor field called service_model_default_text

It contains, for instance, "we can service your [[model-name]]"

The code for the [[model-name]] hanna code is 

<?php echo wire("page")->title; ?>

I have the replace surrounding tag set to "no" and it is type PHP

I have another page called Audi. In the template for that page I get the field from the services page.

<?php echo $pages->get("/servicing/")->service_model_default_text; ?>

The idea is that the hanna code is replace with the page title from the audi page so that the final result is:

We can service your Audi.

Unfortunately, the hanna code system does not seem to be able to do that, it prints out the page title fine, but not the rest of the text from the field.

However, if I change the hanna code to another one I have, [[phonenumber]], which takes its input from a field on a completely separate page, it works fine.

Confused!

Share this post


Link to post
Share on other sites

I tested something like this in latest dev and 2.4 installation, works fine. I can't see any text not outputting.

Default site. Added hanna code formatter to body field. In /templates/ page in the body I place a hanna code inside text [[model-name]] and output that text on the About page. 

Hanna code 

<?php
echo wire("page")->title;

In template basic-page.php

echo $pages->get("/templates/")->body;

The hanna tag gets replaced with the page title and the surrounding text is still there.

Share this post


Link to post
Share on other sites

Damn!

I wonder what I have got that is messing it up?

I think I will strip the entire template out apart from the get line and see what happens

Share this post


Link to post
Share on other sites

Do those two pages, the one you have the body field and the about page, use the same template?

I just emptied the template file, but it still is not working properly.

I noticed that when I save and test the hanna code, inside the dotted box it just says Hanna Code

No idea why.

Share this post


Link to post
Share on other sites

Yes those two pages have same template. It doesn't matter what template. I've never used the save and test. But I think you would see the current admin page title if anything at all.

Share this post


Link to post
Share on other sites

hmm ... so something is not right. 

With the other hanna code, the one that points to a telephone number, in test it shows the telephone number.

I have tried deleting the hanna code instance, and adding a new one and it is the same problem.

The only other thing is that they are on different tree levels - the page that has the text in it is a child of home, the other page, the Audi page, is its grandchild. But I dont think that should be a problem.

I am a bit lost on this, to be honest, and it has brought the project to a shuddering halt

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Gadgetto
      SnipWire - Snipcart integration for ProcessWire
      Snipcart is a powerful 3rd party, developer-first HTML/JavaScript shopping cart platform. SnipWire is the missing link between Snipcart and the content management framework ProcessWire.
      With SnipWire, you can quickly turn any ProcessWire site into a Snipcart online shop. The SnipWire plugin helps you to get your store up and running in no time. Detailed knowledge of the Snipcart system is not required.
      SnipWire is free and open source licensed under Mozilla Public License 2.0! A lot of work and effort has gone into development. It would be nice if you could donate an amount to support further development:

      Status update links (inside this thread) for SnipWire development
      2020-01-21 -- Snipcart v3 - when will the new cart system be implemented? 2020-01-19 -- integrated taxes provider finished (+ very flexible shipping taxes handling) 2020-01-14 -- new date range picker, discount editor, order notifiactions, order statuses, and more ... 2019-11-15 -- orders filter, order details, download + resend invoices, refunds 2019-10-18 -- list filters, REST API improvements, new docs platform, and more ... 2019-08-08 -- dashboard interface, currency selector, managing Orders, Customers and Products, Added a WireTabs, refinded caching behavior 2019-06-15 -- taxes provider, shop templates update, multiCURL implementation, and more ... 2019-06-02 -- FieldtypeSnipWireTaxSelector 2019-05-25 -- SnipWire will be free and open source Plugin Key Features
      Fast and simple store setup Full integration of the Snipcart dashboard into the ProcessWire backend (no need to leave the ProcessWire admin area) Browse and manage orders, customers, discounts, abandoned carts, and more Process refunds and send customer notifications from within the ProcessWire backend Process Abandoned Carts + sending messages to customers from within the ProcessWire backend Complete Snipcart webhooks integration (all events are hookable via ProcessWire hooks) Integrated taxes provider (which is more flexible then Snipcart own provider) Useful Links
      SnipWire in PW modules directory (alpha version only available via GitHub) SnipWire Docs (please note that the documentation is a work in progress) SnipWire @GitHub (feature requests and suggestions for improvement are welcome - I also accept pull requests) Snipcart Website  
      ---- INITIAL POST FROM 2019-05-25 ----
       
    • By d'Hinnisdaël
      Happy new year, everybody 🥬
      I've been sitting on this Dashboard module I made for a client and finally came around to cleaning it up and releasing it to the wider public. This is how it looks.
      ProcessWire Dashboard

      If anyone is interested in trying this out, please go ahead! I'd love to get some feedback on it. If this proves useful and survives some real-world testing, I'll add this to the module directory.
      Download
      You can find the latest release on Github.
      Documentation
      Check out the documentation to get started. This is where you'll find information about included panel types and configuration options.
      Custom Panels
      My goal was to make it really simple to create custom panels. The easiest way to do that is to use the panel type template and have it render a file in your templates folder. This might be enough for 80% of all use cases. For anything more complex (FormBuilder submissions? Comments? Live chat?), you can add new panel types by creating modules that extend the DashboardPanel base class. Check out the documentation on custom panels or take a look at the HelloWorld panel to get started. I'm happy to merge any user-created modules into the main repo if they might be useful to more than a few people.
       Disclaimer
      This is a pre-release version. Please treat it as such — don't install it on production sites. Just making sure 🍇
      Roadmap
      These are the things I'm looking to implement myself at some point. The wishlist is a lot longer, but those are the 80/20 items that I probably won't regret spending time on.
      Improve documentation & add examples ⚙️ Panel types Google Analytics ⚙️ Add new page  🔥 Drafts 🔥 At a glance / Page counter 404s  Layout options Render multiple tabs per panel panel groups with heading and spacing between ✅ panel wrappers as grid item (e.g. stacked notices) ✅ Admin themes support AdminThemeReno and AdminThemeDefault ✅ Shortcuts panel add a table layout with icon, title & summary ✅ Chart panel add default styles for common chart types ✅ load chart data from JS file (currently passed as PHP array) Collection panel support image columns ✅ add buttons: view all & add new ✅
    • By Robin S
      This module is inspired by and similar to the Template Stubs module. The author of that module has not been active in the PW community for several years now and parts of the code for that module didn't make sense to me, so I decided to create my own module. Auto Template Stubs has only been tested with PhpStorm because that is the IDE that I use.
      Auto Template Stubs
      Automatically creates stub files for templates when fields or fieldgroups are saved.
      Stub files are useful if you are using an IDE (e.g. PhpStorm) that provides code assistance - the stub files let the IDE know what fields exist in each template and what data type each field returns. Depending on your IDE's features you get benefits such as code completion for field names as you type, type inference, inspection, documentation, etc.
      Installation
      Install the Auto Template Stubs module.
      Configuration
      You can change the class name prefix setting in the module config if you like. It's good to use a class name prefix because it reduces the chance that the class name will clash with an existing class name.
      The directory path used to store the stub files is configurable.
      There is a checkbox to manually trigger the regeneration of all stub files if needed.
      Usage
      Add a line near the top of each of your template files to tell your IDE what stub class name to associate with the $page variable within the template file. For example, with the default class name prefix you would add the following line at the top of the home.php template file:
      /** @var tpl_home $page */ Now enjoy code completion, etc, in your IDE.

      Adding data types for non-core Fieldtype modules
      The module includes the data types returned by all the core Fieldtype modules. If you want to add data types returned by one or more non-core Fieldtype modules then you can hook the AutoTemplateStubs::getReturnTypes() method. For example, in /site/ready.php:
      // Add data types for some non-core Fieldtype modules $wire->addHookAfter('AutoTemplateStubs::getReturnTypes', function(HookEvent $event) { $extra_types = [ 'FieldtypeDecimal' => 'string', 'FieldtypeLeafletMapMarker' => 'LeafletMapMarker', 'FieldtypeRepeaterMatrix' => 'RepeaterMatrixPageArray', 'FieldtypeTable' => 'TableRows', ]; $event->return = $event->return + $extra_types; }); Credits
      Inspired by and much credit to the Template Stubs module by mindplay.dk.
       
      https://github.com/Toutouwai/AutoTemplateStubs
      https://modules.processwire.com/modules/auto-template-stubs/
    • By Mike Rockett
      Jumplinks for ProcessWire
      Release: 1.5.60
      Composer: rockett/jumplinks
      ⚠️ NOTICE: 1.5.60 is an important security patch-release for an XSS vulnerability discovered by @phlp. It's HIGHLY RECOMMENDED that all Jumplinks users update to the latest version as soon as possible.
      Jumplinks is an enhanced version of the original ProcessRedirects by Antti Peisa.
      The Process module manages your permanent and temporary redirects (we'll call these "jumplinks" from now on, unless in reference to redirects from another module), useful for when you're migrating over to ProcessWire from another system/platform. Each jumplink supports wildcards, shortening the time needed to create them.
      Unlike similar modules for other platforms, wildcards in Jumplinks are much easier to work with, as Regular Expressions are not fully exposed. Instead, parameters wrapped in curly braces are used - these are described in the documentation.
      Under Development: 2.0, to be powered by FastRoute
      As of version 1.5.0, Jumplinks requires at least ProcessWire 2.6.1 to run.
      View on GitLab
      Download via the Modules Directory
      Read the docs
      Features
      The most prominent features include:
      Basic jumplinks (from one fixed route to another) Parameter-based wildcards with "Smart" equivalents Mapping Collections (for converting ID-based routes to their named-equivalents without the need to create multiple jumplinks) Destination Selectors (for finding and redirecting to pages containing legacy location information) Timed Activation (activate and/or deactivate jumplinks at specific times) 404-Monitor (for creating jumplinks based on 404 hits) Additionally, the following features may come in handy:
      Stale jumplink management Legacy domain support for slow migrations An importer (from CSV or ProcessRedirects) Feedback & Feature Requests
      I’d love to know what you think of this module. Please provide some feedback on the module as a whole, or even regarding smaller things that make it whole. Also, please feel free to submit feature requests and their use-cases.
      Note: Features requested so far have been added to the to-do list, and will be added to 2.0, and not the current dev/master branches.
      Open Source

      Jumplinks is an open-source project, and is free to use. In fact, Jumplinks will always be open-source, and will always remain free to use. Forever. If you would like to support the development of Jumplinks, please consider making a small donation via PayPal.
      Enjoy! 🙂
    • By Robin S
      Add Image URLs
      Allows images/files to be added to Image/File fields by pasting URLs.

      Usage
      Install the Add Image URLs module.
      A "Paste URLs" button will be added to all image and file fields. Use the button to show a textarea where URLs may be pasted, one per line. Images/files are added when the page is saved.
       
      https://github.com/Toutouwai/AddImageUrls
      https://modules.processwire.com/modules/add-image-urls/
×
×
  • Create New...