Recently Updated Topics

With anything new that gets designed (a website, operating system, interface), there's always that initial cringe feeling because it's no longer familiar and comfortable, but after a couple weeks, that goes away. I'm developing a new site and using the new Konkat admin theme, which at first felt totally wrong, but now it feels just right (with 1-2 CSS tweaks, like to make repeaters jump out more). My brain is very picky about adjusting to new fonts... Inter in this case. I like the font a lot, but I just need to adjust to it, get used to the curves. Same thing with new versions of Windows when they change the default font. It's kind of like when Facebook went through a few major design changes at during the 5-10 mark and everyone would complain, then everyone got used to it. Anyway, great work. It's grown on me.

Wow, that was quick. Thanks. Will wait until it goes into main and then update through module interface.

In the “Core” tabs of the “Modules” page, look for the “IMagick Image Sizer” module and check if it’s installed. Is so, try uninstalling it and see if it solves your issue.

[Update] Notify existing buyers and update purchases when products gain gated content (v1.0.10) Hi everyone, we’ve extended StripePaymentLinks based on a customer request. Some products evolve over time and later receive gated content (downloads, course pages, etc.). We now handle that case automatically. What it does: When an existing product is later marked as gated and has a stripe product id the module will: Notify existing users via an access email that new gated content is available for something they already own. Update all relevant purchase entries for those users so the meta object and the purchase_lines reflect the actual delivery page (page ID scope), keeping historical purchases consistent with the current site structure and enabling access control. No manual migration needed; it all happens in the background once the product is flagged as requiring access and the corresponding stripe product id is pasted. Available from now on in v1.0.10. Thanks for the request and feedback that led to this improvement! Cheers, Mike

Only 4 years later I found the cause for this. It’s an Apache behaviour: Some Apache configurations are just fine with spaces in URL paths. Some force a 404 status code, no matter what you try to do in your PHP. Might have something to do with ModSecurity module, but I’m not sure. Better be safe: If you can avoid spaces or %20 in URLs, do it!

Many thanks @jploch that really helps to start and to find some more orientation how and with what in Page Grid. I have to to dive in...

I just switched to UiKit version 3.24.1 (thanks to RockFrontend to make this easy), and I can reproduce this with the latest version of the Less module... The same errors

@ryan nice to see an update to this. Less is 5.4.0, so the link on ProCache is broken: https://github.com/wikimedia/less.php/tree/v5.4.1 and the setting wont point to the correct folder.

Cross linking And also, this v useful module: https://github.com/BitPoet/SaveUserUnpublished

Thanks @jploch for your further explanation.

Thanks @cwsoft for your hints, I'll check them.

I also just stumbled upon the same issue – but with assets built inside of ddev. Adding the assets dir to `upload_dirs` didn't help...

Triggering Custom JS function Hi folks, I'm using Privacywire on a number of sites and it;s working well, thank you! With Microsoft Clarity now moving to requiring a consent signal on cookie acceptance I had hoped to run a signal function for this with the 'Trigger a custom JS function' setting in Privacywire's config (right at the bottom). However, having declared a test function (to just console.log something) higher up in the page script files, and adding the function name into the Custom JS function field in Privacywire, I can't get the function to run when cookies are accepted. I have tried both the function name (e.g. 'myFunction') and with brackets (e.g. 'myFunction()') but neither seems to work. Anyone tried this and got it to work? Thanks for any help!

Thanks for pointing that out! You're right, it looks odd — but it's right.

I finally had time to get back to this. I don't know what I did before, but it is working now. I started with a fresh dev and prod site so maybe there was something goofy in the other one I set up. I will keep playing with this and see if I can get it running on a real site.

Perhaps the module can better communicate this in some way. I'll think about ways to possibly remind superadmins if translation is not fully ready. Google has more languages, DeepL has a few extra features. The extra features in DeepL have defaults that you only need to change if you really want to, so no additional configuration. I prefer the translations from DeepL, but Google is a good alternative to have because of their language selection. I've had some challenges with this myself. I usually create a dev key that is unrestricted for development since I know that it won't be used anywhere else and a separate API key for production where the IP address will be stable and the setup is more permanent. No problem at all.

Not sure if it was body text, or quote, or code, so trying all three. Sync report == StripePaymentLinks: Sync (TEST RUN) == Mode: DRY RUN (no writes) Update existing: yes Create missing users: yes From: 2025-10-08 To: - 2025-10-08 13:53 cs_test_a12s... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1961 2025-10-08 13:02 cs_test_a1DI... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1964 2025-10-08 09:19 cs_test_a1U9... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1965 2025-10-08 09:10 cs_test_a1iB... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1966 Sync report == StripePaymentLinks: Sync (TEST RUN) == Mode: DRY RUN (no writes) Update existing: yes Create missing users: yes From: 2025-10-08 To: - 2025-10-08 13:53 cs_test_a12s... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1961 2025-10-08 13:02 cs_test_a1DI... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1964 2025-10-08 09:19 cs_test_a1U9... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1965 2025-10-08 09:10 cs_test_a1iB... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1966 I did not get blocked. I'm wondering if it's forum category/subforum specific?

Hi @adrian, for your information, I have posted a comment on the issue already open: Repeater template with multilanguage fields does not take in account the noLang setting in the parent template. The link for the comment is: - https://github.com/processwire/processwire-issues/issues/2077#issuecomment-3385589884 If you have more information to add to the issue I would appreciated if you could add it. Thank you Kind regards

Tip: In Symfony Console, if you run code and an Exception or WireException occurs, ProcessWire will not be able to log it (and also send an adminEmail). There were cases where I was calling an undefined method on a page object and not knowing about it erroring. I used AI to work through this and ultimately it said I have to basically manage this myself because Symfony Console will catch things if I don't and never hit ProcessWire. Therefore, you may want to do something like this in your handle method: public function handle() { try { nonExistentFunction(); // purposely cause an error } catch (\Throwable $e) { // log the error $this->wire()->log->save('errors', $e->getMessage()); // consider adding additional code here to send an email notification using WireMail // ... // Re-throw so it still displays in console throw $e; } return self::SUCCESS; } I wonder if there's a more efficient way to do this? It took me too long to figure out what was happening in the first place so I haven't spent time optimizing the approach (if it's even possible).

(deleted)

Thanks Mike - my memory is so bad I didn't remember you posting that even though it was a few posts further up. Maybe I need to get my eyes checked whilst I'm at it 😅

Hello Jan, I did not find any infos about the possibility of creating multi-step forms inside the form builder docs, but maybe I have overlooked it too.😉 I will take your request as an idea about a new feature for the future and maybe I will integrate the possibility of creating a multi-step form out of the box in an easy way. I have some ideas but I guess this will take a lot of time, so it cannot be realized in the next days.

@dab thank you so much for sharing! That actually solved my problem! Because $config->httpHosts = array('domain.com'); didn't work, but $config->httpHosts = array('domain.com', 'www.domain.com'); did!