Recently Updated Topics

This is an inputfield module I made as a replacement for InputfieldPageListSelect, due to frustration with it not opening the page structure to the currently selected page. Please note the requirement of ProcessWire >= v3.0.248 when using it as an inputfield for a Page Reference field due to this now fixed core issue. The module doesn't make the PW version a strict requirement in case you just want to replace instances of InputfieldPageListSelect via the bundled ReplacePageListSelect module. Page Tree Select An inputfield for selecting a single page from the page tree. This inputfield is similar to the core InputfieldPageListSelect, but it has the following advantages: It automatically expands the tree to the currently selected page. This avoids having to drill down through the tree when you want to change the selection to a sibling or child of the currently selected page. This was the primary motivation for creating the module. It's faster to navigate through because the whole tree is rendered at once rather than branch by branch. It provides a filter feature to locate pages by title anywhere in the tree. When the tree is filtered you can hover a page title to see the breadcrumb path to the page in a tooltip. It provides buttons to clear the current selection, to restore a changed selection, and to scroll to the selected page. Configuration The following config options are available when using the module as an inputfield for a Page Reference field: Exclude admin pages: excludes pages from the tree that have the admin template. Exclude pages by template: pages having any of the templates you select here will be excluded from the tree. Descendants of any excluded pages are also excluded. Limit for total pages in the tree: this limit is applied to the selector that finds pages for the tree (default is 5000). Limitations and considerations Performance seems to be reasonable when the tree consists of up to 5000 pages. Your mileage may vary and the module may not be suitable for sites with a very large number of pages (unless excluding pages by template in the inputfield configuration). Pages in the tree show their titles rather than any custom setting defined for the template "List of fields to display in the admin Page List". Page titles are only shown in the default language. The module does not reproduce some of the quirks/features of ProcessPageList such as excluding pages that are hidden and non-editable, and forcing the sort position of special pages like Admin and Trash. ProcessWire >= v3.0.248 is needed for the inputfield to appear as an option in Add Field due to this now fixed core issue. Replacing InputfieldPageListSelect in the ProcessWire admin An autoload module named ReplacePageListSelect is bundled with InputfieldPageTreeSelect. Install the module if you would like to replace all instances of InputfieldPageListSelect in the ProcessWire admin with InputfieldPageTreeSelect. For advanced use cases there are two hookable methods: ReplacePageListSelect::allowReplacement($inputfield): set the event return to false to disable replacement on particular instances of InputfieldPageListSelect. ReplacePageListSelect::getPageTreeSelect($inputfield): set excludeAdminPages, excludeTemplates and limitTotalPages properties on the event return InputfieldPageTreeSelect object when replacing particular instances of InputfieldPageListSelect. https://github.com/Toutouwai/InputfieldPageTreeSelect

I remember a while back someone posted an nginx config file they got to work with ProCache. I CANNOT find this post and if anyone has a better memory or search skills than me, I would be very greatful for a link. I've got another project coming up where we'll be building our first public facing website with PW so I'd like to get going on this. Thanks in advance!

https://github.com/matjazpotocnik/ProcessWire-AIOM-All-In-One-Minify Note that AIOM+ has a caching component, similar to Procache.

[Update] More flexible access mails (v 1.0.11) Just pushed a small update to the module — a few quality-of-life improvements for access mails. What’s new Custom intro text for access mails – There’s a new field called Access Mail Intro Text (optional) access_mail_addon_txt added to your product templates. Whatever you put in there gets prepended to the access mail’s lead text — great for short intros, personal notes, or product-specific instructions. Hookable mail variables – PLMailService adds the hookable method ___alterAccessMailVars($vars, $mod, $user, $links) You can now easily tweak mail content in your ready.php, for example "first purchase vs. repeat purchase": wire()->addHookAfter('PLMailService::alterAccessMailVars', function(\ProcessWire\HookEvent $event) { $vars = (array) $event->arguments(0); $user = $event->arguments(2); // check if this is the user's first purchase $purchaseCount = ($user->hasField('spl_purchases') && $user->spl_purchases) ? $user->spl_purchases->count() : 0; $isFirstPurchase = ($purchaseCount <= 1); if ($isFirstPurchase) { $vars['preheader'] = 'Welcome! Your new access is ready.'; } else { $vars['preheader'] = 'New access added to your account.'; } // Hand back the modified variables $event->return = $vars; }); As always, feedback, ideas, and real-world use cases are more than welcome — especially if you’ve built custom hooks for your own onboarding or mail flows. Cheers, Mike

Hi, well, all this sounds quite normal, when starting an install process, if the htaccess file is named .htaccess the web site will try to work as if it were installed which is not the case in the contrary, wuen the install process is running/finished this file needs to be renamed as .htaccess with the starting period else it won't work as the server won't find it as a genuine .htaccess file il you have a look à the install.php file code, you'll see when the mutation takes place 🙂 have a nice day

v1.0.2 Bugfix: Fix deprecation warnings in PHP 8.2 (contributed by esszett in #2) Note that the module now extends the WireData class instead of Wire. This is recommended for modules now and shouldn't cause problems, and it gets rid of any warnings because of undeclared property access. If this is causing any unintended side effects, let me know.

The CustomPath module works fine for our purposes. Thanks for the hint.

With anything new that gets designed (a website, operating system, interface), there's always that initial cringe feeling because it's no longer familiar and comfortable, but after a couple weeks, that goes away. I'm developing a new site and using the new Konkat admin theme, which at first felt totally wrong, but now it feels just right (with 1-2 CSS tweaks, like to make repeaters jump out more). My brain is very picky about adjusting to new fonts... Inter in this case. I like the font a lot, but I just need to adjust to it, get used to the curves. Same thing with new versions of Windows when they change the default font. It's kind of like when Facebook went through a few major design changes at during the 5-10 mark and everyone would complain, then everyone got used to it. Anyway, great work. It's grown on me.

Wow, that was quick. Thanks. Will wait until it goes into main and then update through module interface.

In the “Core” tabs of the “Modules” page, look for the “IMagick Image Sizer” module and check if it’s installed. Is so, try uninstalling it and see if it solves your issue.

Only 4 years later I found the cause for this. It’s an Apache behaviour: Some Apache configurations are just fine with spaces in URL paths. Some force a 404 status code, no matter what you try to do in your PHP. Might have something to do with ModSecurity module, but I’m not sure. Better be safe: If you can avoid spaces or %20 in URLs, do it!

Many thanks @jploch that really helps to start and to find some more orientation how and with what in Page Grid. I have to to dive in...

I just switched to UiKit version 3.24.1 (thanks to RockFrontend to make this easy), and I can reproduce this with the latest version of the Less module... The same errors

Cross linking And also, this v useful module: https://github.com/BitPoet/SaveUserUnpublished

Thanks @jploch for your further explanation.

Thanks @cwsoft for your hints, I'll check them.

I also just stumbled upon the same issue – but with assets built inside of ddev. Adding the assets dir to `upload_dirs` didn't help...

Triggering Custom JS function Hi folks, I'm using Privacywire on a number of sites and it;s working well, thank you! With Microsoft Clarity now moving to requiring a consent signal on cookie acceptance I had hoped to run a signal function for this with the 'Trigger a custom JS function' setting in Privacywire's config (right at the bottom). However, having declared a test function (to just console.log something) higher up in the page script files, and adding the function name into the Custom JS function field in Privacywire, I can't get the function to run when cookies are accepted. I have tried both the function name (e.g. 'myFunction') and with brackets (e.g. 'myFunction()') but neither seems to work. Anyone tried this and got it to work? Thanks for any help!

Thanks for pointing that out! You're right, it looks odd — but it's right.

I finally had time to get back to this. I don't know what I did before, but it is working now. I started with a fresh dev and prod site so maybe there was something goofy in the other one I set up. I will keep playing with this and see if I can get it running on a real site.

Perhaps the module can better communicate this in some way. I'll think about ways to possibly remind superadmins if translation is not fully ready. Google has more languages, DeepL has a few extra features. The extra features in DeepL have defaults that you only need to change if you really want to, so no additional configuration. I prefer the translations from DeepL, but Google is a good alternative to have because of their language selection. I've had some challenges with this myself. I usually create a dev key that is unrestricted for development since I know that it won't be used anywhere else and a separate API key for production where the IP address will be stable and the setup is more permanent. No problem at all.

Not sure if it was body text, or quote, or code, so trying all three. Sync report == StripePaymentLinks: Sync (TEST RUN) == Mode: DRY RUN (no writes) Update existing: yes Create missing users: yes From: 2025-10-08 To: - 2025-10-08 13:53 cs_test_a12s... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1961 2025-10-08 13:02 cs_test_a1DI... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1964 2025-10-08 09:19 cs_test_a1U9... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1965 2025-10-08 09:10 cs_test_a1iB... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1966 Sync report == StripePaymentLinks: Sync (TEST RUN) == Mode: DRY RUN (no writes) Update existing: yes Create missing users: yes From: 2025-10-08 To: - 2025-10-08 13:53 cs_test_a12s... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1961 2025-10-08 13:02 cs_test_a1DI... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1964 2025-10-08 09:19 cs_test_a1U9... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1965 2025-10-08 09:10 cs_test_a1iB... [LINKED] XXXXXXXXXXX => action: UPDATE purchase #1966 I did not get blocked. I'm wondering if it's forum category/subforum specific?

Hi @adrian, for your information, I have posted a comment on the issue already open: Repeater template with multilanguage fields does not take in account the noLang setting in the parent template. The link for the comment is: - https://github.com/processwire/processwire-issues/issues/2077#issuecomment-3385589884 If you have more information to add to the issue I would appreciated if you could add it. Thank you Kind regards