Jump to content
justb3a

Module: Image Extra

Recommended Posts

On 11/20/2018 at 2:33 PM, maxf5 said:

 

Here is a little fix:

In your templates/admin.php add a custom css file:


$config->styles->add($config->urls->templates . "styles/admin.css");
require($config->paths->adminTemplates . 'controller.php'); 

in templates/styles/admin.css


.PageList .PageListItem:hover .PageListActions {
    display: inline-block !important;
}
 

Nice find! But I think it just cures the syndrome and to be honest, it's kind of dependency nightmare to create a generic css-file which patch problems of a certain module. The real pain is: ImageExtra does not pay attention to the new UIkit classes completely.

I suggest the following: replace the $out in the method renderLinkItemField with:

$out = '<div class="InputfieldImageEdit__additional--' . $name . '">' .
        '<label class="uk-form-label detail" for="' . $fieldName . '">' . $field->label . '</label>' .
        '<div class="InputfieldContent uk-form-controls" style="padding:0;">' .
            $field->render() . '
        </div>' .
    '</div>';

Overall I think ImageExtra from @justb3a is still a great module, but it is somewhat dated and needs some love.

Share this post


Link to post
Share on other sites

Hi.

For some reason, without doing any changes on my part to the PW install over the last 2 years, the image extra field that I had set up disappeard just now from the edit page:

I have setup the image field with a custom text input as follows:

619134391_2019-06-2509_54_38-EditField_article_imagesanglejournal_com.thumb.png.f770541f05ea1eb8193df407caf59b87.png

But I do not see this with the image when editing a page:

1112972030_2019-06-2509_56_32-Inbox.thumb.png.232f7176891999cd48a0c8f711194634.png

In the database, the field is available and filled for all "old" pages that were created a while back:

928902479_2019-06-2509_58_10-anglejournal.com_localhost_anglejou_pw_field_article_images_phpMyAdmin4.png.f8736b95821d984ad35fbc95a306e4d2.png

[Note: I have just now, after the issue occured, manually changed the default in the table from None to "" as it otherwise would not have allowed me to upload any new images]

Did anyone encounter this before? How do I get the field back to show when editing pages?

Any help would be highly appreciated!

Best

Lars

Share this post


Link to post
Share on other sites

Hey!
I just installed this module on a fresh PW  3.0.123
Everything works fine - thanks for that!
Little Issue  when the size of the description field is set to "0": After upload of an image, the input fields of the extrafields also are missing - only the labels are visible.

After first save everything works correct!

imageExtra.png

Hope, this was not discussed before ... - thanks for any help!

 

Share this post


Link to post
Share on other sites
On 6/25/2019 at 10:01 AM, Lars282 said:

Hi.

For some reason, without doing any changes on my part to the PW install over the last 2 years, the image extra field that I had set up disappeard just now from the edit page:

I have setup the image field with a custom text input as follows:

619134391_2019-06-2509_54_38-EditField_article_imagesanglejournal_com.thumb.png.f770541f05ea1eb8193df407caf59b87.png

But I do not see this with the image when editing a page:

1112972030_2019-06-2509_56_32-Inbox.thumb.png.232f7176891999cd48a0c8f711194634.png

In the database, the field is available and filled for all "old" pages that were created a while back:

928902479_2019-06-2509_58_10-anglejournal.com_localhost_anglejou_pw_field_article_images_phpMyAdmin4.png.f8736b95821d984ad35fbc95a306e4d2.png

[Note: I have just now, after the issue occured, manually changed the default in the table from None to "" as it otherwise would not have allowed me to upload any new images]

Did anyone encounter this before? How do I get the field back to show when editing pages?

Any help would be highly appreciated!

Best

Lars

I have the same problem.

Installed the module. 

There is no selection of fields where the extra fields should be added (as in some tutorials)

The field for adding extra fields is available at every image field

image.png.2b09c79977a14aa631213ce82a4187dd.png

but the fields do not show up. Any solutions for this?

image.thumb.png.705b08913d5555a884d7b46fb853fdf6.png

ProcessWire 3.0.123

Image Extra 

Version

1.0.6

 

 

Using the Module and the fields at some other PW installations, there it works.

 

Share this post


Link to post
Share on other sites

@NoremPload ProcessWire 3.0.142 (which is a dev version and very recently released) brings in the ability to have custom fields for images.  I personally had some issues with this ImageExtra plugin and stopped using it a while ago (it's been a few years).  Also the author is no longer working with ProcessWire so there's also that.  I'd recommend putting in the extra work to do it the new, native way:

https://processwire.com/blog/posts/pw-3.0.142/

Share this post


Link to post
Share on other sites
12 hours ago, Jonathan Lahijani said:

@NoremPload ProcessWire 3.0.142 (which is a dev version and very recently released) brings in the ability to have custom fields for images.  I personally had some issues with this ImageExtra plugin and stopped using it a while ago (it's been a few years).  Also the author is no longer working with ProcessWire so there's also that.  I'd recommend putting in the extra work to do it the new, native way:

https://processwire.com/blog/posts/pw-3.0.142/

Thank You !!!! Upgraded to 3.0.143 and it works. Spent hours yesterday to get this fixed, you saved me some more hours working on it ;)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By gebeer
      I am happy to present my new fieldtype FieldtypeImageFromPage. It is made up of 2 modules:
      Fieldtype Image Reference From Another Page is a Fieldtype that stores a reference to a single image from another page. The image can be selected with the associated Inputfield.
      Inputfield Select Image From Page is an Inputfield to select a single image from images on a predefined page and it's children.
      And there also is a helper module that takes care of cleanup tasks.
      This module evolved out of a discussion about my other Module FieldtypeImagePicker.  It caters for use cases where a set of images is being reused multiple times across a site. With this fieldtype these images can be administered through a chosen page. All images uploaded to that page will be available in the inputfield.
      When to use ?
      Let editors choose an image from a set of images that is being used site-wide. Ideal for images that are being re-used across the site.
      Suited for images that are used on multiple pages throughout the site (e.g. icons).
      Other than the native ProcessWire images field, the images here are not stored per page. Only references to images on another page are stored. This has several advantages:
      one central place to organize images when images change, you only have to update them in one place. All references will be updated, too. (Provided the name of the image that has changed stays the same) Features
      Images can be manipulated like native ProcessWire images (resizing, cropping etc.) Image names are fully searchable through the API Accidental image deletion is prevented. When you want to delete an image from one of the pages that hold your site-wide images, the module searches all pages that use that image. If any page contains a reference to the image you are trying to delete, deletion will be prevented. You will get an error message to help you edit those pages and remove references there before you can finally delete the image. How to install and setup
      Download and install this module like any other modules in ProcessWire Create a page in the page tree that will hold your images. This page's template must have an images field Upload some images to the page you created in step 2 Create a new field. As type choose 'Image Reference From Another Page'. Save the field. In 'Details' Tab of the field choose the page you created in step 2 Click Save button Choose the images field name for the field that holds your images (on page template from step 2) Click Save button again Choose whether you want to include child pages of page from step 2 to supply images Add the field to any template You are now ready to use the field View of the inputfield on the page edit screen:

      View of the field settings

      The module can be installed from this github repo. Some more info in the README there, too.
      In my tests it was fairly stable. After receiving your valued feedback, I will eventually add it to the modules directory.
      My ideas for further improvement:
      - add ajax loading of thumbnails
      Happy to hear your feedback!
       
    • By gebeer
      Although the PW backend is really intuitive, ever so often my clients need some assistance. Be it they are not so tech savvy or they are not working in the backend often.
      For those cases it is nice to make some help videos available to editors. This is what this module does.
      ProcessHelpVideos Module
      A Process module to display help videos for the ProcessWire CMS. It can be used to make help videos (screencasts) available to content editors.
      This module adds a 'Help Videos" section to the ProcessWire backend. The help videos are accessible through an automatically created page in the Admin page tree. You can add your help videos as pages in the page tree. The module adds a hidden page to the page tree that acts as parent page for the help video pages. All necessary fields and templates will be installed automatically. If there are already a CKEditor field and/or a file field for mp4 files installed in the system, the module will use those. Otherwise it will create the necessary fields. Also the necessary templates for the parent help videos page and it's children are created on module install. The module installs a permission process-helpvideos. Every user role that should have access to the help video section, needs this permission. I use the help video approach on quite a few production sites. It is stable so far and well received by site owners/editors. Up until now I installed required fields, templates and pages manually and then added the module. Now I added all this logic to the install method of the module and it should be ready to share.
      The module and further description on how to use it is available on github: https://github.com/gebeer/ProcessHelpVideos
      If you like to give it a try, I am happy to receive your comments/suggestions here.
    • By Robin S
      A module created in response to the topic here:
      Page List Select Multiple Quickly
      Modifies PageListSelectMultiple to allow you to select multiple pages without the tree closing every time you select a page.
      The screencast says it all:

       
      https://github.com/Toutouwai/PageListSelectMultipleQuickly
      https://modules.processwire.com/modules/page-list-select-multiple-quickly/
    • By gebeer
      Hello all,
      sharing my new module FieldtypeImagePicker. It provides a configurable input field for choosing any type of image from a predefined folder.
      The need for it came up because a client had a custom SVG icon set and I wanted the editors to be able to choose an icon in the page editor.
      It can also be used to offer a choice of images that are used site-wide without having to upload them to individual pages.
      There are no image manipulation methods like with the native PW image field.
      Module and full description can be found on github https://github.com/gebeer/FieldtypeImagePicker
      Kudos to @Martijn Geerts. I used his module FieldTypeSelectFile as a base to build upon.
      Here's how the input field looks like in the page editor:

      Hope it can be of use to someone.
      If you like to give it a try, I'm happy to hear your comments or suggestions for improvement. Eventually this will go in the module directory soon, too.
    • By bernhard
      @Sergio asked about the pdf creation process in the showcase thread about my 360° feedback/survey tool and so I went ahead and set my little pdf helper module to public.
      Description from PW Weekly:
       
      Modules Directory: https://modules.processwire.com/modules/rock-pdf/
      Download & Docs: https://github.com/BernhardBaumrock/RockPDF
       
      You can combine it easily with RockReplacer: 
      See also a little showcase of the RockPdf module in this thread:
       
×
×
  • Create New...