All Activity

So... the very first iteration looks like this. Used a "Look there, apply to that"-prompt. We wiill get there. Now I have to dig a little bit deeper to fine-tune. Big help already! Thanks @maximus!

🤯 this might actually be the solution to everything wrong in my modules. I am not sure if I already read about it here somewhere but couldn't find it when looking up module theming/styling. I will give this a try. Might have to try a few variations as most projects, even new ones, still use the old styling.

I tried adding examples, but it doesn't always work. Sometimes he often doesn't understand what needs to be implemented and how. Sometimes he's pulling hardcode, sometimes something else. I usually write prompt in AI "apply the design system to the module https://github.com/mxmsmnv/pw-design-system" and then it makes a more conscious design. To ensure the design is consistent across both the old and new versions of the theme, you need to create a hardcoded framework like in my Collections module. Then it will look the same across all versions. If you write directly for the new design, some parts won't display in the old one. I've migrated almost all of my websites to the new theme. Clients just need to get used to it, then they'll say it's so cool. I'd also make a colored header module in the admin panel, but that's a whole other story. Design system https://mxmsmnv.github.io/pw-design-system/

I solved this warning (PHP 8.4, ProcessWire 3.0.255, MarkupSimpleNavigation 1.3.7😞 Warning: Undefined array key 1 in /homepages/site/assets/cache/FileCompiler/site/modules/MarkupSimpleNavigation/MarkupSimpleNavigation.module on line 313 With this change in MarkupSimpleNavigation.module on line 312 - 316: if($this->iteration == 1) { $out .= "\n" . ($this->outer_tpl[1] ?? ''); } else if(count($children)) { $out .= "\n" . ($this->inner_tpl[1] ?? '') . "\n"; }

How do you prompt and guide Agents (or any AI tool) to get a good understanding of module pages? Below are screenshots of what I currently have (finally). Yet both could be much more beautiful or at least organised and looking more clean. Sure I could go fully custom here but i want it to work with AdminThemeUiKit (and all existing flavours of it). Do you add other modules as examples to the context or do you go this step as we did 5 years ago and code it yourself?

In case it is of interest to someone: https://www.youtube.com/@IBMTechnology I viewed one of the videos presented by Martin Keen the other day and thus discovered this channel. There seems to be a lot of good videos about different aspects of AI and other subjects. I haven't started yet with AI, I'm just slowly trying to understand how things work. As soon as I can I'll try to use it locally. In reality the first (specialized and local) one(s) I'll probably/perhaps try will be while using DaVinci Resolve Studio. For the moment the only one I've started using a few times is Leo on the Brave Browser (On another subject, I just discovered yesterday by accident while using the mouse that it is possible to split the view with (only) 2 visible tabs, unlike with Vivaldi where there are more options. I hadn't even searched if it was possible. And I've just discovered it is now possible with Firefox, but also only with 2 tabs.). I had found about Aider a few weeks or months ago, it seemed really interesting.

https://ai.google/societal_impact/

I’ve just uploaded a new version of NativeAnalytics 1.0.20. This update mainly focuses on monthly reporting, privacy options, engagement tracking improvements and some smaller admin UI refinements. Added / improved Added optional monthly email reports Added Send test report now option in module settings Added report preview before sending Added optional PDF report attachment Improved page-level analytics summary inside Page Edit Added a setting to show/hide the Page Edit analytics summary Improved spacing and styling of the Page Edit analytics block Improved engagement event tracking, especially form submit tracking Added better cache-busting for updated tracker/admin assets Added module info files so the ProcessWire modules directory and Upgrade module can detect the version correctly Added support links to the module info array The module should now also be upgradeable through the ProcessWire Upgrade module once the modules directory has refreshed the latest version. The current version is 1.0.20. Special thanks to matjazp for testing the module and reporting useful issues along the way. The feedback helped a lot with polishing the module and making it more reliable in real-world use. P

Sorry for late reply. Is this something new, did you upgrade the module or is this new install? AIOM doesn't inject admin bar, I guess it should be there, if you have permission to use it (I don't know the module). Is it better if you don't use html minify option? Empty cache just remove css/js files so they are regenerated next time. Will take a look when I have more time.

That's why GitHub Issues exist. 😄

True - that would be amazing. But also, think about 22,000 support tickets? 🫣

I recently started to use more desktop apps, in this case OpenCode Desktop, which is quite similar to OpenAI Codex and the Claude Desktop app, but actually available for Linux. One great feature is Git worktrees support. They just work with NextJS, AstroJS, HonoJS but not with ProcessWire in my DDEV setup. I'm not sure if anyone else already found a great solution or maybe even built a module, script or anything like that (and I couldn't find anything) to support Git worktrees in DDEV environments with almost no manual intervention, so... I asked my agent to help me. I just pushed the inital/experimental version to Github. I tested it quite a bit with two projects locally in my setup and it works on my machine. https://github.com/webmanufaktur/processwire-ddev-worktree This is more like a proof-of-concept than a stable release. In case you want to test it, maybe don't. Or at least not with important projects. There might be plenty of edge-cases it won't handle right now or even break things on your machine. But it just solved a pretty big problem (for me) I ran into today. Look into it, feel free to fork it or send a PR.

Also checked BuiltWith — there are 22,000+ live ProcessWire sites out there. Would love to see Ichiban running on as many of them as possible someday. 🙂

Thanks for the kind words, Peter! This actually gave me the push to keep going - after several iterations I had almost given up on building something substantial, because every popular CMS already has mature SEO tooling. I went through Yoast, RankMath, SEOmatic, and a bunch of others, took notes on what worked and what didn't, and tried to bring the best of it to ProcessWire. Still a long way to go, but the foundation is there. Looking forward to seeing SEO NEO when it's ready too - good SEO tooling for ProcessWire benefits everyone!

Thanks for the kind words! I have a month's worth of modules, not as big as Collections, Ichiban, or Context, but very useful. Usually, when I run into a problem, I try to solve it right away using a module so that other users can use it in the future.

Another findRaw() deprecation which will throw an exception from these new core updates. If you try to do "image.filename" or any other image subfield, you'll get: ProcessWire\\WireException: Unknown column name(s) for findRaw: image.filename Just use "image" and it will work.

@maximus I can confirm that all the bugs are now fixed. As @wbmnfktr said, the concept and execution are top notch. I'm now looking forward to a new module from you every week! No pressure !!😉😆

If you want to try cheaper models, while having the same experience as Claude Code, check out Deepseek TUI or, for multi providers, check Openecode or Aider.

I’ve been using `TextformatterVideoEmbed` for YouTube/Vimeo embeds and made a small local patch that seems generally useful for generated iframe output. The change adds two attributes to generated iframe embeds when they are not already present: ```html loading="lazy" referrerpolicy="strict-origin-when-cross-origin" ``` This is independent of any consent/privacy module. It simply improves the default iframe markup produced by `TextformatterVideoEmbed`. The intended behavior is: - add `loading="lazy"` to iframe embeds by default - add `referrerpolicy="strict-origin-when-cross-origin"` by default - do not override either attribute if it already exists in the iframe markup - keep existing embed behavior unchanged otherwise Example implementation pattern: ```php if(stripos($embedCode, ' loading=') === false) { $embedCode = preg_replace('/<iframe\b/i', '<iframe loading="lazy"', $embedCode, 1); } if(stripos($embedCode, ' referrerpolicy=') === false) { $embedCode = preg_replace('/<iframe\b/i', '<iframe referrerpolicy="strict-origin-when-cross-origin"', $embedCode, 1); } ``` Reasoning: - Native iframe lazy loading is now widely supported and helps avoid loading off-screen video embeds unnecessarily. - `strict-origin-when-cross-origin` is also the modern browser default in many contexts, but making it explicit gives generated third-party embeds a safer baseline. - The change is low risk because it only applies to iframe markup and skips attributes already present. Would this be suitable as a small PR to the module? If preferred, it could also be exposed as module config options rather than hardcoded defaults.

Hello everyone, We're slowly working through our site and moving things into modules for antarctica.gov.au, in the process we hope to open source some handy things we've built over the years. As we operate in Microsoft heavy corporate environment, we've noticed more and more strange looking links getting pasted into our site. These are Microsoft protected links and are a 'intercept' link that attempts to check the link is legit before letting the user proceed to the original URL. These links get automatically made when a user copies a link from Outlook/Teams/Office. The issue is, these links leak data in the URL parameters, including the email address of who has copied the link! Hence, we wrote two companion modules to find and format these links. First is TextformatterMicrosoftProtectedLinks which formats the links at render time. Second is FormatMicrosoftProtectedLinks which replaces the link with the original URL when saving the page. We provided both modules as it depends on your preference. Some people like to leave the page content as the original (including the protected link), others like to replace this. Let us know if you notice any issues using these modules.

There is a panel on tracy to see all the database queries executed, maybe something there?

Dear @Nomak, your project sounds straightforward and well-prepared. Since you already have a fully completed design and will handle the backend yourself, I can focus entirely on delivering clean, responsive, and high-performance frontend code. Here is why I am a great fit for this project: Location & Legal: I am based in the EU (Germany) and will provide a valid EU VAT ID for proper, hassle-free invoicing. Experience & Modern Tech Stack: I have been working in web development since 1995, meaning I understand the core of the web inside out. However, I always stay on the cutting edge. For modern, responsive, and maintainable styles, I highly leverage Tailwind CSS, alongside clean HTML and robust JavaScript. Efficiency through AI: I actively integrate modern AI tools into my workflow, which allows me to speed up the development process, optimize code efficiency, and deliver high-quality results faster. Responsive Execution: Ensuring a seamless experience across desktop, tablet, and mobile devices is standard practice in my work. You can convince yourself of the quality of my work by taking a look at my portfolio: 👉 dotnetic.de/referenzen I would love to realize this project with you. Let’s connect to discuss the details and the design template. Best regards, Jens

Thanks for the write-up, @ryan.

@zilli I'm kind of just getting started too, as a couple of months ago I knew nothing about Claude Code or Codex or any of the other tools. I also felt overwhelmed which led me to avoid the AI stuff for awhile. Too much noise. But my client started using Claude Code and I started getting interested in it. Start with Claude Code or Codex, they are basically identical. Codex is a better value overall IMO, but Claude might be slightly easier to start with. To get started, install Claude or Codex (use instructions on their site). If using Claude, and you have a choice of "model" choose "Sonnet". Claude's premium model is "Opus" but they don't give you enough usage of it on the $20/month plan. Whereas Sonnet is still very smart and lasts for quite awhile on the $20/month plan. If using Codex, you'll get GPT 5.5 which is their latest model and you get plenty of usage on the $20 plan. That's why I say Codex is a better value. The best way to get started is just start asking Claude or Codex questions about how to do things. Create a hello-world/ directory somewhere on your localhost. If you are comfortable with the terminal, go to the directory and type "claude" (or "codex"). It will ask you to login to your Claude or OpenAI account. Then you are ready to go. If not comfortable with the terminal, then stick to the Claude or Codex desktop apps, which can do just as much and maybe more. Ask Claude or Codex to do something like "create a hello-world.html file" just to get a feel for how it works. Ask it to continue making edits to it just for fun. Once you feel comfortable with this, then you are ready to use it in ProcessWire. No need to start creating any .md files at first. Once you get going, ask Claude when/if you should create a CLAUDE.md file (or AGENTS.md for Codex and others, same thing). These files are really only useful once you are working on an actual project and want to provide instructions in a file that gets read every time, rather than pasting them into a prompt. But technically there's very little difference between providing something in an .md file and just providing it in a prompt, at least until it comes time to /compact or /clear (but you can learn about that later). Both Claude and Codex are already well trained on ProcessWire, and they don't need to read the codebase unless they want to. But I do think it's beneficial to run the latest dev branch version of ProcessWire, which includes documentation for AI agents built in. Installing the AgentTools module will be worthwhile for Claude or Codex to be able to most effectively use ProcessWire's API and use built-in tools for pulling documentation, site/schema maps and booting ProcessWire on its own. You don't need to configure any agents in AgentTools for this kind of usage. Just install the module and tell Claude/Codex to go read the /site/modules/AgentTools/AGENTS.md file, and it will be ready to do anything in ProcessWire. If you later want to add agents in AgentTools, that will let you use Claude/Codex inside of the ProcessWire admin for making edits, creating migrations, etc. But you don't need that to get started. I haven't yet even tried any tools other than just plan Claude and Codex (and AgentTools)--so far I haven't felt like I need anything more. I'm also not using any MCP servers. The others here can better speak to those tools and such. Every morning while making and eating breakfast, I do watch YouTube videos on using Claude and Codex though. It's become part of my boot up sequence. 🙂