Jump to content
Mats

Module: Leaflet Map

Recommended Posts

On 10.1.2018 at 3:32 AM, gebeer said:

...

You'd need a hidden field in the form, e.g. _js_geocode_raw that gets populated from the JS (just like the address field gets populated now) and then on save sends that value and stores it to the DB. You'd need to add that to the set method in LeafletMapMarker.php.

Ok, I'll give it a try on the weekend again. I really want to achieve correct address values so the users cannot mess-up text fields used for json+ld.

Share this post


Link to post
Share on other sites

To give a status: I got it working :rolleyes: I need to do some clean up and then I can provide it.

@BrendonKoz Should I make a pull request to your code or to the original one?

  • Like 1

Share this post


Link to post
Share on other sites

@patman I'd suggest making the PR to the original repo as this feature will be a good improvement to the original module.

Share this post


Link to post
Share on other sites
On 1/13/2018 at 8:08 AM, patman said:

@BrendonKoz Should I make a pull request to your code or to the original one?

Congratulations on your success. If you're going to make a pull request I'd make it to the original Fieldtype module as that was the only reason I had forked the original module's code to begin with - to have workable code to store the raw return data, and offer a possible pull request.

Share this post


Link to post
Share on other sites

I made my cleanup and pushed it to github: https://github.com/madebymats/FieldtypeLeafletMapMarker/compare/PW3...patman15:PW3

There is most probably still an issue with the default value, as I could not figure out how this works in the available time. Nevertheless, that has no real impact. I would be happy if some one could have a look and give feedback and/or test the version. I also added the new DB schema to allow for automatic updates. A smoke test went successfully. I'll wait for some feedback and make then the pull request.

Share this post


Link to post
Share on other sites
On 1/14/2018 at 2:16 PM, patman said:

I made my cleanup and pushed it to github: https://github.com/madebymats/FieldtypeLeafletMapMarker/compare/PW3...patman15:PW3

There is most probably still an issue with the default value, as I could not figure out how this works in the available time. Nevertheless, that has no real impact. I would be happy if some one could have a look and give feedback and/or test the version. I also added the new DB schema to allow for automatic updates. A smoke test went successfully. I'll wait for some feedback and make then the pull request.

I took a look at it. This is not the same thing that I was trying to accomplish (not that it has to be). These alterations don't use the Google geocoder's returned JSON data, it uses OpenStreetMap. I don't remember how, but I do remember I was able to get the JSON results of the OpenStreetMap geocoded data without any modifications to the module. What I was unable to get was the same values (100% of the time) from Google's geocoder, which contains more information (and often, I've found, more properly formatted and correct) than the OpenStreetMaps version. Because the found addresses for PLACES don't always match ("NYS Public Library" might not list a street address on OpenStreetMap, but Google will include everything), doing a manual lookup with Google's geocoder after-the-fact won't work 100% of the time. (Those were some of my reasons anyway.)

As for code:

  1. When changing a version number that has companion modules you'd probably want them all to match. Just a suggestion for any future possible patches. :)
  2. LeafletMapMarker.php around line 62:
} else if($key == 'raw') {
    $value = $value;
}

At first I did that too in my version (I think I removed it in my repo, maybe not) but that's just unnecessary. ;) Still looking through the rest as like I said, I don't fully grasp FieldtypeModule code.

Share this post


Link to post
Share on other sites

Thanks for your feedback, I'll fix a few things

On 24.1.2018 at 10:53 PM, BrendonKoz said:

I took a look at it. This is not the same thing that I was trying to accomplish (not that it has to be). These alterations don't use the Google geocoder's returned JSON data, it uses OpenStreetMap.

Well, it is actually the purpose of this module not to use Google API. The description says

Quote

This is a port of the Map Marker Fieldtype by Ryan Cramer. Instead of Google maps it uses Leaflet maps.

So if you want to use Google you actually forked the wrong module maybe you should take a look at https://modules.processwire.com/modules/fieldtype-map-marker/

If you want the same modifications can for sure be also done there.

Share this post


Link to post
Share on other sites

The purpose of the module is to provide a way to display Leaflet Maps. Leaflet =/= OpenStreetMap. Leaflet is a map display library whereas OpenStreetMaps is the actual map layer data source. OSM can be displayed using Leaflet (popular), OpenLayers, or even Google's map library, so I don't know (for sure) if the purpose of the module was specifically to avoid using Google's technology behind the scenes (which it does anyway as is evidenced from previous discussions of the code). I prefer OpenStreetMaps' imagery and ToS, but prefer Google's geocoder. Like I said though, your fork of the code is your own -- it did not have to follow my personal ideas. :)

Share this post


Link to post
Share on other sites

I just upgraded a site to the latest version of this module and ran into some problems.

When I tried to upgrade the module via the ProcessWireUpgrade module, it showed a Fatal error.  I think it was WireData class undefined (Can't remember exactly).  It kept saying it was on a the 2.x version instead of the 3.x version.  So then I proceeded to just download it from github.  After I did that, the error went away.

Now on one page the leaflet map loads on the frontend, but it doesn't load any pins on the map like it did before.

Here is the error in Chrome's console:

errors.thumb.jpg.e96ec688aee3430b7e36a63194062533.jpg

On another frontend page the map doesn't load at all and I see this error in the console:

error2.jpg.c6a3a2d9feb40ee523ca158564fc8c4e.jpg

If I edit the page, I see the following error "WireDatabasePDO: SQLSTATE[42S22]: Column not found: 1054 Unknown column 'field_cleanup_location.raw' in 'field list'".  So I checked the table "field_cleanup_location" and it was missing a "raw" column.  So maybe the update script didn't run correctly?

PW 3.0.90, Google Chrome-Mac, I also refreshed the modules page and cleared the compiled files.

Anybody have any ideas?

Share this post


Link to post
Share on other sites

Tried on another site... The exact error I get is "Fatal Error Class 'WireData' not found"

error.thumb.jpg.c93a663865f04fa90996349188c94fcf.jpg

I get this error directly after I click on the Upgrade link.

upgradelink.thumb.jpg.d195441d79191a129e6d37ffb3365b51.jpg

Hope that helps

Share this post


Link to post
Share on other sites

The upgrade schema errors should now be fixed now.

I did see another problem.  It looks like when you output a map on the frontend, it includes both leaflet 0.7.3 and leaflet 0.7.7 css and javascript files from unpkyg.com.  I pretty sure this could cause problems.

In MarkupLeafletMap.module init() line 109... If I comment out the following lines:

        $this->config->styles->add('https://unpkg.com/leaflet@0.7.3/dist/leaflet.css');
        $this->config->styles->add($assetPath . "assets/leaflet-markercluster/MarkerCluster.css");
        $this->config->styles->add($assetPath . "assets/leaflet-markercluster/MarkerCluster.Default.css");
        $this->config->scripts->add('https://unpkg.com/leaflet@0.7.3/dist/leaflet.js');
        $this->config->scripts->add($assetPath . 'assets/leaflet-markercluster/leaflet.markercluster.js');
        $this->config->scripts->add($assetPath . 'assets/leaflet-providers/leaflet-providers.js');
        $this->config->scripts->add($assetPath . 'MarkupLeafletMap.js');

then leaflet 0.7.3 no longer loads its js and css.  It will only load leaflet 0.7.7 js and css.

I wonder if those lines are really needed for anything?

  • Thanks 1

Share this post


Link to post
Share on other sites

Sorry if I am asking something stupid, but.. how can I render multiple instances of maps?

$map = wire('modules')->get('MarkupLeafletMap');
echo $map->render($page, 'map');
echo $map->render($page, 'map2');

I can get only the last one.. if I delete it than the first one is showing. 

Thx!

Share this post


Link to post
Share on other sites

I would like to output the address field in the frontend. However the field contains too much information. It's automatically populated with address, road, city, state and country, sometimes even more. Is there a way to only get the basic address?

Share this post


Link to post
Share on other sites
11 hours ago, uliverse said:

I would like to output the address field in the frontend. However the field contains too much information. It's automatically populated with address, road, city, state and country, sometimes even more. Is there a way to only get the basic address? 

This module is meant to give a lt/lng position of an address so we can display a marker on a map. It is not an address field type. When you set the marker on the page that you edit, it will get the address for the lat/lng that you have set in the GUI by reverse geocoding it through the Google geocoding API. This returns the long address string that you can get in your template with $page->mylocationfieldname->address.

To answer your question, there are ways to get a properly formatted address but all of them involve some work:
1. extend the module yourself to store address parts. Or read posts in this thread from here on and than use @BrendonKoz or @patman forks:

2. add fields to your template for postcode, street address, city, country. Fill them manually when you edit the page. Then you can render them in your templates. This should be the easiest way.

3. switch to the Map Marker Module which uses Google Maps and read from this post on where @adrian has extended the functionality to give you exactly what you want:

 

  • Like 3

Share this post


Link to post
Share on other sites

Thanks for your explanation. Of course, it is always an option to keep the map and the address fields separate (your option 2), but it seemed to be a better user experience to combine the two. I did try to use the original Map Marker module by Ryan. But things have become so complicated with the Google API console and somehow I can't get it to work, the geocoding won't work any longer even though I have created an API code and all... Besides, I do like the Open Street Map idea. That's why I hoped to use the Leaflet module.

Share this post


Link to post
Share on other sites

@uliverse You can still use the Leaflet module and read through this thread from the link I recommended in my last post. Then have a look at how BrendonKoz and patman solved it in their forks. Seems like they have a readily available solution.

Share this post


Link to post
Share on other sites
On 5/4/2018 at 2:27 PM, Tintifax said:

Sorry if I am asking something stupid, but.. how can I render multiple instances of maps?


$map = wire('modules')->get('MarkupLeafletMap');
echo $map->render($page, 'map');
echo $map->render($page, 'map2');

I can get only the last one.. if I delete it than the first one is showing. 

Thx!

any ideas? 😞

Share this post


Link to post
Share on other sites
31 minutes ago, Tintifax said:

any ideas? 😞

I just had a quick look, I think there is a bug in the render function at the end:

$this->page->inlineScript = $inlineScript;

This would replace the page content always with the last map. Unfortunately, I was not quickly able to fix it. In my opinion adding a dot

$this->page->inlineScript .= $inlineScript;

should make it, but it didn't (at least in my quick try).

Share this post


Link to post
Share on other sites

Hey... does anybody know how to remove the scroll wheel zoom behavior? There is an option to set scrollWheelZoom to false, but that does not do anything...

Share this post


Link to post
Share on other sites

@uliverse - for now that option only works on the frontend not the backend.

Here is what I use:

Spoiler

$map = wire('modules')->get('MarkupLeafletMap');

$cleanupLocationMap = $map->render($page, 'cleanup_location', array(
  'height' => '300px',
  'markerIcon' => 'thumb-tack',
  'markerColour' => 'green',
  'provider' => 'OpenStreetMap.Mapnik',
  'scrollWheelZoom' => 'false',
  'markerLinkField' => ''
));

// Then I echo the $cleanupLocationMap in my template

 

 

Share this post


Link to post
Share on other sites

Thank you... But even for the frontend it won't work... I tried your approach as well, but the result is the same.

Share this post


Link to post
Share on other sites

I asked for removing the scroll in the backend already. It makes it so easy to inadvertently destroy carefully set map settings.

I hacked the module code to change that for the time being. :-)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By dimitrios
      Hello,
      this module can publish content of a Processwire page on a Facebook page, triggered by saving the Processwire page.
      To set it up, configure the module with a Facebook app ID, secret and a Page ID. Following is additional configuration on Facebook for developers:
      Minimum Required Facebook App configuration:
      on Settings -> Basics, provide the App Domains, provide the Site URL, on Settings -> Advanced, set the API version (has been tested up to v3.3), add Product: Facebook Login, on Facebook Login -> Settings, set Client OAuth Login: Yes, set Web OAuth Login: Yes, set Enforce HTTPS: Yes, add "http://www.example.com/processwire/page/" to field Valid OAuth Redirect URIs. This module is configurable as follows:
      Templates: posts can take place only for pages with the defined templates. On/Off switch: specify a checkbox field that will not allow the post if checked. Specify a message and/or an image for the post.
      Usage
      edit the desired PW page and save; it will post right after the initial Facebook log in and permission granting. After that, an access token is kept.
       
      Download
      PW module directory: http://modules.processwire.com/modules/auto-fb-post/ Github: https://github.com/kastrind/AutoFbPost   Note: Facebook SDK for PHP is utilized.


    • By kongondo
      FieldtypeRuntimeMarkup and InputfieldRuntimeMarkup
       
      Modules Directory: http://modules.processwire.com/modules/fieldtype-runtime-markup/
      GitHub: https://github.com/kongondo/FieldtypeRuntimeMarkup
      As of 11 May 2019 ProcessWire versions earlier than 3.x are not supported
      This module allows for custom markup to be dynamically (PHP) generated and output within a page's edit screen (in Admin).
       
      The value for the fieldtype is generated at runtime. No data is saved in the database. The accompanying InputfieldRuntimeMarkup is only used to render/display the markup in the page edit screen.
       
      The field's value is accessible from the ProcessWire API in the frontend like any other field, i.e. it has access to $page and $pages.
       
      The module was commissioned/sponsored by @Valan. Although there's certainly other ways to achieve what this module does, it offers a dynamic and flexible alternative to generating your own markup in a page's edit screen whilst also allowing access to that markup in the frontend. Thanks Valan!
       
      Warning/Consideration
      Although access to ProcessWire's Fields' admin pages is only available to Superusers, this Fieldtype will evaluate and run the custom PHP Code entered and saved in the field's settings (Details tab). Utmost care should therefore be taken in making sure your code does not perform any CRUD operations!! (unless of course that's intentional) The value for this fieldtype is generated at runtime and thus no data is stored in the database. This means that you cannot directly query a RuntimeMarkup field from $pages->find(). Usage and API
       
      Backend
      Enter your custom PHP snippet in the Details tab of your field (it is RECOMMENDED though that you use wireRenderFile() instead. See example below). Your code can be as simple or as complicated as you want as long as in the end you return a value that is not an array or an object or anything other than a string/integer.
       
      FieldtypeRuntimeMarkup has access to $page (the current page being edited/viewed) and $pages. 
       
      A very simple example.
      return 'Hello'; Simple example.
      return $page->title; Simple example with markup.
      return '<h2>' . $page->title . '</h2>'; Another simple example with markup.
      $out = '<h1>hello '; $out .= $page->title; $out .= '</h1>'; return $out; A more advanced example.
      $p = $pages->get('/about-us/')->child('sort=random'); return '<p>' . $p->title . '</p>'; An even more complex example.
      $str =''; if($page->name == 'about-us') { $p = $page->children->last(); $str = "<h2><a href='{$p->url}'>{$p->title}</a></h2>"; } else { $str = "<h2><a href='{$page->url}'>{$page->title}</a></h2>"; } return $str; Rather than type your code directly in the Details tab of the field, it is highly recommended that you placed all your code in an external file and call that file using the core wireRenderFile() method. Taking this approach means you will be able to edit your code in your favourite text editor. It also means you will be able to type more text without having to scroll. Editing the file is also easier than editing the field. To use this approach, simply do:
      return wireRenderFile('name-of-file');// file will be in /site/templates/ If using ProcessWire 3.x, you will need to use namespace as follows:
      return ProcessWire\wireRenderFile('name-of-file'); How to access the value of RuntimeMarkup in the frontend (our field is called 'runtime_markup')
       
      Access the field on the current page (just like any other field)
      echo $page->runtime_markup; Access the field on another page
      echo $pages->get('/about-us/')->runtime_markup; Screenshots
       
      Backend
       

       

       
      Frontend
       

    • By kongondo
      Media Manager
       
      Released 31 March 2016
      https://processwireshop.pw/plugins/media-manager/
      Documentation 
      http://mediamanager.kongondo.com/
      As of 10 May 2019 ProcessWire versions earlier than 3.x are not supported
      *******************************************************   ORIGINAL POST   *******************************************************
      API Example (frontend; will be added to documentation site)
      Accessing and outputting the contents of the MediaManager field(s) in your template is quite simple. The fields are accessed like many other ProcessWire fields. The fields return an array of type MediaManagerArray that need to be looped to output each media within. Assuming you created a field of type MediaManager named 'media', you can loop through it for a given page as shown below.
        @note: Each MediaManager object has the following 5 basic properties:   DATABASE (saved properties) 1. id => pageID of the page where the media lives (hidden in admin and not important to know about) 2. type => integer denoting media type (1=audio; 2=document; 3=image [for variations this will be 3x, where x is the number of the variation of an original image]; 4=video)   RUNTIME 3. typeLabel => user friendly string denoting media type (audio, document, image, video) 4. media => a ProcessWire Image/File Object including all their properties (ext, filesizeStr, height, width, description, tags, filename, basename, etc.) 5. title => title of media (@note: this is the title of the page where the media lives; may or may not be the same as the name of the media file itself). This can be used as a user-friendly name for your media $media = $page->media;// returns a MediaManagerArray. Needs to be looped through foreach ($media as $m) { echo $m->id;// e.g. 1234 (hidden page in /admin/media-manager/media-parent/) echo $m->type;// e.g. 3 (a media of type image) OR 1 (a media of type audio) echo $m->typeLabel;// e.g. 'document' (i.e. type would be 2) echo $m->title;// e.g. 'My Nice Trip' (whose media file could be my-nice-trip.mp4) /* @note: - $m->media returns an object; either a ProcessWire Image (for image media) or File object (for audio, document and video media) - This means you have access to all the properties of that object, e.g. ext, tags, description, url, filename, basename, width, height, modified, created, filesize, filesizeStr, etc as well as associated methods, e.g. size() */ echo $m->media->tags; } // only output images foreach ($media as $m) { if($m->typeLabel =='image') { echo "<img src='" . $m->media->size(100,75)->url . "'><br>"; } } // There's also a toString() method so you can do: echo $page->media; /* All your media will be output wrapped in appropriate HTML tags, i.e.: audio: <audio></audio>; document: <a></a>; image: <img>; video: <video></video>; */  
      *******************************************************   ORIGINAL POST   *******************************************************
       
      The topic of a central media manager feature for ProcessWire has come up several times:
       
      https://processwire.com/talk/topic/4330-get-image-from-other-pages-via-images-field/
      https://processwire.com/talk/topic/4330-get-image-from-other-pages-via-images-field/?p=42578
      https://processwire.com/talk/topic/4330-get-image-from-other-pages-via-images-field/?p=42582
      https://processwire.com/talk/topic/425-file-manager/
      https://processwire.com/talk/topic/425-file-manager/?p=13802
      https://processwire.com/talk/topic/425-file-manager/?p=13861
      https://processwire.com/talk/topic/10763-asset-manager-asset-selector/
       
      More recently, regarding my Visual Page Selector module, I have been asked several times why the module does not have an in-built feature to upload images.
       
      There's two camps on the topic of a central media manager: those who like them (especially those coming in to PW from other CMSes) and those who don't like them (primarily because of the chaotic way some CMSes (dis)organise their media management) . I think that we can have our cake and eat it too! If done the right way, closely following the principles of and harnessing the power of ProcessWire, we can have a well-implemented, organised, feature-rich, site-wide media manager.
       
      Introducing Media Manager: (a commercial module)
       
      Alongside a number of modules I am currently working on (both free and commercial), I have been developing  a centralised Media Manager for ProcessWire. Before you cast the first stone, no, this is not going to be a one-large-media-bucket as in other CMS where it gets very messy very quickly . In the backend things are neatly stored away, yes, in pages. However, those are pages you will not see (just like repeater pages). Before anyone has a go at pages, remember a page is not that thing you see on the ProcessWire Tree (that's just its visual representation); A page is a record/row in the database    . For the end-user of Media Manager, all they will see is the 'familiar media bucket' to select their media from. As long as it works efficiently, I don't think they care about the wizardry behind the scenes  . 
       
      The module allows for the comprehensive management of several media types:
      Audio Video Images Documents Each media type will be handled by its own sub-module so the user can pick and install/choose the type of media management they want.
       
      Features include:
      Access controls Centralized uploads of media Bulk management of media: tag, delete, describe, replace, etc. Bulk upload: zip; scan, single Quick upload in page edit mode Usage stats across pages (maybe?) Etc.. Would love to hear your thoughts and any feature suggestions. I think there's enough demand for such a module. If not, please let me know so that I can instead focus on other things  , thanks.
       
      How other CMS do it

       
      The more efficient (PW) way of doing it

    • By Robin S
      I have had this module sitting in a 95% complete state for a while now and have finally made the push to get it out there. Thanks to @teppo for his Hanna Code Helper module which I referred to and borrowed from during development.
      http://modules.processwire.com/modules/hanna-code-dialog/
      https://github.com/Toutouwai/HannaCodeDialog
      HannaCodeDialog
      A module for ProcessWire CMS/CMF. Provides a number of enhancements for working with Hanna Code tags in CKEditor. The main enhancement is that Hanna tags in a CKEditor field may be double-clicked to edit their attributes using core ProcessWire inputfields in a modal dialog.
      Requires the Hanna Code module.
      Installation
      Install the HannaCodeDialog module using any of the normal methods.
      For any CKEditor field where you want the "Insert Hanna tag" dropdown menu to appear in the CKEditor toolbar, visit the field settings and add "HannaDropdown" to the "CKEditor Toolbar" settings field.
      Module configuration
      Visit the module configuration screen to set any of the following:
      Exclude prefix: Hanna tags named with this prefix will not appear in the CKEditor toolbar dropdown menu for Hanna tag insertion. Exclude Hanna tags: Hanna tags selected here will not appear in the CKEditor toolbar dropdown menu for Hanna tag insertion. Background colour of tag widgets: you can customise the background colour used for Hanna tags in CKEditor if you like. Dialog width: in pixels Dialog height: in pixels Features
      Insert tag from toolbar dropdown menu
      Place the cursor in the CKEditor window where you want to insert your Hanna tag, then select the tag from the "Insert Hanna tag" dropdown.

      Advanced: if you want to control which tags appear in the dropdown on particular pages or templates you can hook HannaCodeDialog::getDropdownTags. See the forum support thread for examples .
      Edit tag attributes in modal dialog
      Insert a tag using the dropdown or double-click an existing tag in the CKEditor window to edit the tag attributes in a modal dialog.

      Tags are widgets
      Hanna tags that have been inserted in a CKEditor window are "widgets" - they have a background colour for easy identification, are protected from accidental editing, and can be moved within the text by drag-and-drop.
      ![Hanna tag widget]
      Options for tag attributes may be defined
      You can define options for a tag attribute so that editors must choose an option rather than type text. This is useful for when only certain strings are valid for an attribute and also has the benefit of avoiding typos.
      Add a new attribute for the Hanna tag, named the same as the existing attribute you want to add options for, followed by "__options". The options themselves are defined as a string, using a pipe character as a delimiter between options. Example for an existing attribute named "vegetables":
      vegetables__options=Spinach|Pumpkin|Celery|Tomato|Brussels Sprout|Potato You can define a default for an attribute as normal. Use a pipe delimiter if defining multiple options as the default, for example:
      vegetables=Tomato|Potato Dynamic options
      Besides defining static options as above, you can use one Hanna tag to dynamically generate options for another. For instance, you could create a Hanna tag that generates options based on images that have been uploaded to the page, or the titles of children of the page.
      Your Hanna tag that generates the options should echo a string of options delimited by pipe characters (i.e. the same format as a static options string).
      You will probably want to name the Hanna tag that generates the options so that it starts with an underscore (or whatever prefix you have configured as the "exclude" prefix in the module config), to avoid it appearing as an insertable tag in the HannaCodeDialog dropdown menu.
      Example for an existing attribute named "image":
      image__options=[[_images_on_page]] And the code for the _images_on_page tag:
      <?php $image_names = array(); $image_fields = $page->fields->find('type=FieldtypeImage')->explode('name'); foreach($image_fields as $image_field) { $image_names = array_unique( array_merge($image_names, $page->$image_field->explode('name') ) ); } echo implode('|', $image_names); Advanced: define or manipulate options in a hook
      You can hook HannaCodeDialog::prepareOptions to define or manipulate options for a Hanna tag attribute. Your Hanna tag must include a someattribute__options attribute in order for the hook to fire. The prepareOptions method receives the following arguments that can be used in your hook:
      options_string Any existing string of options you have set for the attribute attribute_name The name of the attribute the options are for tag_name The name of the Hanna tag page The page being edited If you hook after HannaCodeDialog::prepareOptions then your hook should set $event->return to an array of option values, or an associative array in the form of $value => $label.
      Choice of inputfield for attribute
      You can choose the inputfield that is used for an attribute in the dialog.
      For text attributes the supported inputfields are text (this is the default inputfield for text attributes so it isn't necessary to specify it if you want it) and textarea. Note: any manual line breaks inside a textarea are removed because these will break the CKEditor tag widget.
      Inputfields that support the selection of a single option are select (this is the default inputfield for attributes with options so it isn't necessary to specify it if you want it) and radios.
      Inputfields that support the selection of multiple options are selectmultiple, asmselect and checkboxes.
      You can also specify a checkbox inputfield - this is not for attributes with defined options but will limit an attribute to an integer value of 1 or 0.
      The names of the inputfield types are case-insensitive.
      Example for an existing attribute named "vegetables":
      vegetables__type=asmselect Descriptions and notes for inputfields
      You can add a description or notes to an attribute and these will be displayed in the dialog.
      Example for an existing attribute named "vegetables":
      vegetables__description=Please select vegetables for your soup. vegetables__notes=Pumpkin and celery is a delicious combination. Notes
      When creating or editing a Hanna tag you can view a basic cheatsheet outlining the HannaCodeDialog features relating to attributes below the "Attributes" config inputfield.
      Troubleshooting
      HannaCodeDialog includes and automatically loads the third-party CKEditor plugins Line Utilities and Widget. If you have added these plugins to your CKEditor field already for some purpose and experience problems with HannaCodeDialog try deactivating those plugins from the CKEditor field settings.
×
×
  • Create New...