Jump to content
benbyf

New module MarkInPageTree

Recommended Posts

MarkInPageTree

New module which does what it says in the title. It adds an icon to a page on the page tree if -> a specific field is true and / or is a specified template.

For example I'm using it to add an icon to any page that has a checked (checkbox) exclusive field. This helps with admin clarity as you can see instantly which pages of the same template have differing content (i.e. are exclusive or not).

https://github.com/benbyford/MarkInPageTree

Screenshot 2016-12-09 14.33.45.png

  • Like 10

Share this post


Link to post
Share on other sites

How about using InputfieldSelector for the page selection and using InputfieldIcon for the icon selection?

  • Like 2

Share this post


Link to post
Share on other sites
Just now, LostKobrakai said:

How about using InputfieldSelector for the page selection and using InputfieldIcon for the icon selection?

Sure, how does one do that :)

Share this post


Link to post
Share on other sites

couldnt work it out, just gave me a field for searching the pages on the site but not selecting them... and it wouldnt show templates or fields.

I was able to use select multiple instead thought. For example:

$f = $this->modules->get('InputfieldSelectMultiple');
$f->attr('name', 'template');
$f->description =  $this->_("Template or templates of pages to trigger bulk email to users after new page published");
$f->addOption('', '');

foreach($this->templates as $template){
$f->addOption($template->name, $template->title);

 

Share this post


Link to post
Share on other sites

Updated and works well (needed to delete the extra fa- in the html as the icon selector adds the complete fontawesome name). Only thing I would change but unsure is whether you can have or selector somehow as it currenlty only adds icons to the selectors found pages not a template or a field for example. i.e. for mulitple selectors.

Share this post


Link to post
Share on other sites

Great idea and great module! Saves me some rather ugly additions to the displayed title page in the page tree.

One thing for the Christmas wish list: It would be even greater if the module would provide a way to set up several different rule sets. So you could set up different icons to mark different things.

  • Like 2

Share this post


Link to post
Share on other sites

not really sure how to make this happen... repeater? Anyone point me in the right direction to creating multiple additional fields to the module settings? so the module can have as many icon and template or field pairs as you want...?

Share this post


Link to post
Share on other sites

Multi-value fields in module config is a bit tricky, because almost everything multi-value in pw is based on pages, which you don't use here. It's probably simplest to add an integer field "number_of_configuration", which does, after it's saved, cause the field(s) for the page selection to be rendered that many times. In your modules code you'd also use that number for determining how often to loop though potential configurations.

Share this post


Link to post
Share on other sites

I would go with the "icon name = selector" route, in a simple textarea, one rule per row. Icon name would be the fontawesome name.

  • Like 2

Share this post


Link to post
Share on other sites

Happy Christmas everyone!

I had a bit of time to add tot his module :)

It now has textareas (thanks @tpr) in it's config which means it can now add as many icons and field and/or template pairs as you like. This means you could add one icon for pages of the template basic-page, and also add another icon for all pages with a counter etc...

Also... I've added a third textarea, allowing you to add a list of fields to show the data for IN the pagetree itself (see image below). In my example below I am able to show in the page tree by each page if they have a counter what the data is and whether the page has a field exclusive and its data.

Thanks for peoples help and hope it is useful. (updated on github)

Screenshot 2016-12-17 15.43.47.png

Screenshot 2016-12-17 15.43.27.png

  • Like 5

Share this post


Link to post
Share on other sites
4 minutes ago, Juergen said:

Hello @benbyf

can you check the following message:

Screenshot_2.jpg

Thanks!

when are you getting this error? can you send me your settings. thanks

Share this post


Link to post
Share on other sites

No its a notice - it only shows up  as an error because I am running Tracy in strict mode.

These are my settings:

Screenshot_3.jpg

  • Like 1

Share this post


Link to post
Share on other sites

As a quick patch this fixes the error:

Change this:

$a[trim($cropItems[1])] = trim($cropItems[0]);

 

To this:

if(count($cropItems) > 1){
	$a[trim($cropItems[1])] = trim($cropItems[0]);
}

 

  • Like 1

Share this post


Link to post
Share on other sites

Thanks, and glad you're finding the module useful.

If you have any other bugs or fixes, please submit a issue or pull request on github

Share this post


Link to post
Share on other sites

Hi,

Thanks for this module, it's quite useful, and it's work very well. However, I still wondering which icons I can use? I can't find anywhere a list or a reference to an iconset used by the module. 

Mel

Share this post


Link to post
Share on other sites

Great module, thank you!

Is there a way to use separate variations of icons, e.g. "fas fa-check" vs. "far fa-check"?

P.S.: You might want to point to the icon cheatsheet in the module description. I was confused as well (newbie).

Share this post


Link to post
Share on other sites
On 9/7/2018 at 10:34 AM, Knubbi said:

Great module, thank you!

Is there a way to use separate variations of icons, e.g. "fas fa-check" vs. "far fa-check"?

P.S.: You might want to point to the icon cheatsheet in the module description. I was confused as well (newbie).

Both valid. PW comes with Fontawesome in the default admin so thats why its the deafult far icons. If you want to purchase new icons versions and replaces the files in your copy then that shoul work.

Will definitely change the description.

  • Like 1

Share this post


Link to post
Share on other sites

Hi Benbyf,

I'm really enjoying this module.  It really helps visualize how the page tree relates to the templates.  I'm using "template" in Data.

One request: It would be really helpful if you could add a permission so that only super users see the MarkInPageTree stuff in the Page Tree by default.  If other roles need to see the MarkInPageTree stuff in the Page Tree, a site admin could add a MarkInPageTree permission to that role.

The only caveat is that existing sites that have already installed this module will need to be updated to use the new permission.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mike Rockett
      Jumplinks for ProcessWire
      Release: 1.5.56
      Composer: rockett/jumplinks
      Jumplinks is an enhanced version of the original ProcessRedirects by Antti Peisa.
      The Process module manages your permanent and temporary redirects (we'll call these "jumplinks" from now on, unless in reference to redirects from another module), useful for when you're migrating over to ProcessWire from another system/platform. Each jumplink supports wildcards, shortening the time needed to create them.
      Unlike similar modules for other platforms, wildcards in Jumplinks are much easier to work with, as Regular Expressions are not fully exposed. Instead, parameters wrapped in curly braces are used - these are described in the documentation.
      Under Development: 2.0, to be powered by FastRoute
      As of version 1.5.0, Jumplinks requires at least ProcessWire 2.6.1 to run.
      View on GitLab
      Download via the Modules Directory
      Read the docs
      Features
      The most prominent features include:
      Basic jumplinks (from one fixed route to another) Parameter-based wildcards with "Smart" equivalents Mapping Collections (for converting ID-based routes to their named-equivalents without the need to create multiple jumplinks) Destination Selectors (for finding and redirecting to pages containing legacy location information) Timed Activation (activate and/or deactivate jumplinks at specific times) 404-Monitor (for creating jumplinks based on 404 hits) Additionally, the following features may come in handy:
      Stale jumplink management Legacy domain support for slow migrations An importer (from CSV or ProcessRedirects) Feedback & Feature Requests
      I’d love to know what you think of this module. Please provide some feedback on the module as a whole, or even regarding smaller things that make it whole. Also, please feel free to submit feature requests and their use-cases.
      Note: Features requested so far have been added to the to-do list, and will be added to 2.0, and not the current dev/master branches.
      Open Source

      Jumplinks is an open-source project, and is free to use. In fact, Jumplinks will always be open-source, and will always remain free to use. Forever. If you would like to support the development of Jumplinks, please consider making a small donation via PayPal.
      Enjoy! :)
    • By BitPoet
      As threatened in Ryan's announcement for 3.0.139, I built a little module for sliding toggles as a replacement for checkboxes. Styling of the input is CSS3 only (with all the usual caveats about older browsers), no JS necessary, and may still be a bit "rough around the edges", so to speak, since I didn't have much time for testing on different devices or brushing things up enough so I'd feel comfortable pushing it to the module directory. But here's the link to the GitHub repo for now:
      InputfieldSlideToggle
      Fieldtype and Inputfield that implements smartphone-style toggles as replacement for checkbox inputs. The visualization is CSS-only, no additional JS necessary.
      Status
      Still very alpha, use with caution!
      Features / Field Settings
      Size
      You can render the toggles in four different sizes: small, medium, large and extra large.
      Off Color
      Currently, "unchecked" toggles can be displayed either in grey (default) or red.
      On Color
      "Checked" toggles can be rendered in one of these colors: blue (default), black, green, grey, orange or red.
      Screenshots

      Some examples with checkbox label


      View all Size and Color Combinations
      Small toggles Medium toggles Big toggles Extra big toggles  









    • By Orkun
      Hi Guys
      I needed to add extended functionalities for the InputfieldDatetime Module (module is from processwire version 2.7.3) because of a Request of Customer.
      So I duplicated the module and placed it under /site/modules/.
      I have added 3 new Settings to the InputfieldDatetime Module.
      1. Day Restriction - Restrict different days based on weekdays selection (e.g. saturday, sunday) - WORKING

       
      2. Time Slots - Define Time slots based on custom Integer Value (max is 60 for 1 hour) - WORKING

       
      3. Time Range Rules per Weekday - Define a minTime and MaxTime per Weekday (e.g. Opening Hours of a Restaurant) - NOT WORKING PROPERLY

       
      The Problem
      Time Slots and Day Restriction working fine so far. But the Time Range Rules per Weekday doesn't work right.
      What should happen is, that when you click on a date, it should update the minTime and maxTime of the Time Select.
      But the change on the select only happens if you select a date 2 times or when you select a date 1 time and then close the datepicker and reopen it again.
      The time select doesn't get change when you select a date 1 time and don't close the picker.
      Here is the whole extended InputfieldDatetime Module.
      The Files that I have changed:
      InputfieldDatetime.module InputfieldDatetime.js jquery-ui-timepicker-addon.js (https://trentrichardson.com/examples/timepicker/) - updated it to the newest version, because minTime and maxTime Option was only available in the new version  
      Thats the Part of the JS that is not working correctly:
      if(datetimerules && datetimerules.length){ options.onSelect = function(date, inst) { var day = $(this).datetimepicker("getDate").getDay(); day = day.toString(); var mintime = $(this).attr('data-weekday'+day+'-mintime'); var maxtime = $(this).attr('data-weekday'+day+'-maxtime'); console.log("weekday: "+day); console.log("minTime: "+mintime); console.log("maxTime: "+maxtime); var optionsAll = $(this).datetimepicker( "option", "all" ); optionsAll.minTime = mintime; optionsAll.maxTime = maxtime; $(this).datetimepicker('destroy'); $(this).datetimepicker(optionsAll); $(this).datetimepicker('refresh'); //$.datepicker._selectDate($(this).attr("id"),date); //$.datepicker._base_getDateDatepicker(); // var inst = $.datepicker._getInst($(this)); // $.datepicker._updateDatepicker(inst); /*$(this).datetimepicker('destroy'); InputfieldDatetimeDatepicker($(this), mintime, maxtime); $(this).datetimepicker('refresh'); */ // $(this).datetimepicker('option', {minTime: mintime, maxTime: maxtime}); } } Can you have a look and find out what the Problem is?
      InputfieldDatetime.zip
       
      Kind Regards
      Orkun
    • By teppo
      This module tracks changes, additions, removals etc. of public (as in "not under admin") pages of your site. Like it's name says, it doesn't attempt to be a version control system or anything like that - just a log of what's happened.
      At the moment it's still a work in progress and will most likely be a victim of many ruthless this-won't-work-let's-try-that-instead cycles, but I believe I've nailed basic functionality well enough to post it here.. so, once again, I'll be happy to hear any comments you folks can provide
      https://modules.processwire.com/modules/process-changelog/
      https://github.com/teppokoivula/ProcessChangelog
      How does it work?
      Exactly like it's (sort of) predecessor, Process Changelog actually consists of two modules: Process Changelog and Process Changelog Hooks. Hooks module exists only to serve main module by hooking into various functions within Pages class, collecting data of performed operations, refining it and keeping up a log of events in it's own custom database table (process_changelog.) Visible part is managed by Process Changelog, which provides users a (relatively) pretty view of the contents of said log table.
      How do you use it?
      When installed this module adds new page called Changelog under Admin > Setup which provides you with a table view of collected data and basic filtering tools See attached screenshots to get a general idea about what that page should look like after a while.
      For detailed installation instructions etc. see README.md.
       


    • By Gadgetto
      Status update links (inside this thread) for SnipWire development will be always posted here:
      2019-08-08
      2019-06-15
      2019-06-02
      2019-05-25
      If you are interested, you can test the current state of development:
      https://github.com/gadgetto/SnipWire
      Please note that the software is not yet intended for use in a production system (alpha version).
      If you like, you can also submit feature requests and suggestions for improvement. I also accept pull requests.
      ---- INITIAL POST FROM 2019-05-25 ----
      I wanted to let you know that I am currently working on a new ProcessWire module that fully integrates the Snipcart Shopping Cart System into ProcessWire. (this is a customer project, so I had to postpone the development of my other module GroupMailer).
      The new module SnipWire offers full integration of the Snipcart Shopping Cart System into ProcessWire.
      Here are some highlights:
      simple setup with (optional) pre-installed templates, product fields, sample products (quasi a complete shop system to get started immediately) store dashboard with all data from the snipcart system (no change to the snipcart dashboard itself required) Integrated REST API for controlling and querying snipcart data webhooks to trigger events from Snipcart (new order, new customer, etc.) multi currency support self-defined/configurable tax rates etc. Development is already well advanced and I plan to release the module in the next 2-3 months.
      I'm not sure yet if this will be a "Pro" module or if it will be made available for free.
      I would be grateful for suggestions and hints!
      (please have a look at the screenshots to get an idea what I'm talking about)
       




×
×
  • Create New...