Jump to content

Tracy Debugger


adrian

Recommended Posts

Remember that if you are a superuser and you have "force su into dev mode" checked, then switching modes won't affect the mode you actually see. How is the performance when you are logged out?

Tracy adds content to the DOM, so it should slow things down if anything. 

Is Tracy logging any errors (even Notices / Warnings)? Do you have any ajax calls - just wondering if Tracy is catching an error early that would otherwise slow things down for some reason?

Are you talking about  the backend or the frontend of the site being slow? Are they both slow with Tracy disabled?

Does Tracy still speed things up with all panels disabled? If not, which particular panel is increasing the speed?

 

Link to comment
Share on other sites

"force su into dev mode" is not checked and there are no errors or warnings

I didn't checked all panels, but It's enough to add one of them: ProcessWire Info or Request Info or Console or Panel Selector.

It's not speeding up with i.e. Tracy Logs or ProcessWire Logs

Backend works normal exept the pagetree. pagetree takes longer than usual.

Link to comment
Share on other sites

1 minute ago, Kholja said:

Another interessting thing is that the frontend seems to slow down only when logged in as superuser. For guests the Site seems to work normal.

Is this speed affected by Tracy at all? Keep in mind that PW's core debug mode kicks in (if it's enabled) when logged in as superuser so there will be some impact from that.

33 minutes ago, Kholja said:

I didn't checked all panels, but It's enough to add one of them: ProcessWire Info or Request Info or Console or Panel Selector.

It's not speeding up with i.e. Tracy Logs or ProcessWire Logs

I honestly have no idea at this point - I can't see why/how those panels could improve the page tree loading speed - for me the page tree ajax call is definitely noticeably slower with Tracy running - obviously it's a trade-off that I think is worth it though.

Link to comment
Share on other sites

2 minutes ago, adrian said:

Is this speed affected by Tracy at all? Keep in mind that PW's core debug mode kicks in (if it's enabled) when logged in as superuser so there will be some impact from that.

Definitely it affects the Frontend. I think a difference by factor about 20 (300ms -> 6s server response time) is probably not caused by the core. In terms of the backend I'm not sure if I'm starting to see ghosts... the impact there is not that big.
Anyway - thanks for your precious input adrian. If i find out more I will post it here.

Link to comment
Share on other sites

I exported the site with ryans ProcessExportProfile Module and did a fresh install. This solved the problem. But would be nice to know what caused the issue.
Thanks Adrian for your quick  response and your support. Your posts were often helpful und a good resource for learning 🙂

  • Like 1
Link to comment
Share on other sites

3 hours ago, Kholja said:

I exported the site with ryans ProcessExportProfile Module and did a fresh install. This solved the problem. But would be nice to know what caused the issue.

Weird - definitely keep us up to date if you find out why.

Link to comment
Share on other sites

On 2/10/2020 at 8:49 AM, bernhard said:

Thx, I'm done with my testing - asking earlier would have saved me some hundred clicks 😄 😛


$options[Dumper::COLLAPSE] = 14;
$options[Dumper::COLLAPSE_COUNT] = 7;

This worked well. It would be nice to have an option somewhere for this, but it is definitely not high priority, so don't hurry. Thx anyhow for taking it into account! 🙂 

Hey @bernhard - those are now the defaults (as per the Tracy core defaults). They are also configurable in the module settings:

image.thumb.png.279d2ad1eead8e148568c28f834575c2.png

and you can also override them for a specific dump with:

d($obj, 'title', ['collapse' => 1, 'collapse_count' => 1]);

which might be handy if you are dumping lots of the same object/array in a loop and you don't want them all open which not only takes up more physical space, but also more reources.
 

  • Like 2
Link to comment
Share on other sites

Just dumping a note here for others. If anyone notices slowness with Tracy enabled, especially when quite a few modules are active, try using php-fpm. I just switched my local set up of homebrew apache + homebrew php 7.4 over to php-fpm instead of mod_php and it has really sped things up. Also been mucking around with the database for the site I am working on, didnt realise I was on MyISAM, so maybe switching to INNODB has had something to do with it as well.

Link to comment
Share on other sites

  • 2 weeks later...

Does anybody know the keyboard shortcut for the multi-cursor feature of ACE? I'm using CTRL-D in VSCode but that does delete the current line in ACE. Multicursor does work though, because I can select multiple items using CTRL+click. Thx!

Link to comment
Share on other sites

30 minutes ago, bernhard said:

Does anybody know the keyboard shortcut for the multi-cursor feature of ACE?

CTRl or CMD + click where you want each extra cursor to be.

Oops, sorry, I guess you already mentioned you had this approach working 🙂

Link to comment
Share on other sites

I'm sorry, I was not precise enough! 😅 See this example:

3WVbDyG.png

The cursor is on the first $out variable and all other occurrances are outlined, so I guess there is a way to select all of them (VSCode CTRL+F2) or one by one (VSCode CTRL-D). This is how it looks in VSCode:

OsUz7Wp.gif

Link to comment
Share on other sites

Thank you very much adrian, not exactly, because that won't work on the last line where $out is prepended by "d(". But I found a list of shortcuts 🙂 https://defkey.com/ace-editor-shortcuts

It's CTRL-ALT-left/right

Not sure if that is an official list, but it might be nice adding a link to the console or inside the keybord shortcuts popup?

QfT2GYL.png

Link to comment
Share on other sites

  • 2 weeks later...

@adrian could you please add the name of the field in the admin actions panel so that it is more obvious and secure?

J5sIDjX.png

Here I'm deleting the field "summary" but it looks more like I am deleting the field "Text". A simple "Delete field > summary < " would do. I think it's a little dangerous as it is now - it's common to have many tabs open at the same time, so there's a high risk of clicking that button in the wrong tab accidentally.

Thank you 🙂 

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Just a quick note that the latest release fixes the "NEW SINCE" feature in the API Explorer panel. It had always mostly seemed to work, but I was often seeing results from old upgrades but wasn't sure why. I think it's now fixed, but I'd appreciate if you guys could check at your end when you next upgrade the PW core and see if it appears correct for you as well. Thanks.

  • Like 3
Link to comment
Share on other sites

  • adrian pinned and locked this topic
  • adrian unpinned and pinned this topic
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Similar Content

    • By monollonom
      (once again I was surprised to see a work of mine pop up in the newsletter, this time without even listing the module on PW modules website 😅. Thx @teppo !)
      FieldtypeQRCode
      Github: https://github.com/romaincazier/FieldtypeQRCode
      Modules directory: https://processwire.com/modules/fieldtype-qrcode/
      A simple fieldtype generating a QR Code from the public URL of the page, and more.
      Using the PHP library QR Code Generator by Kazuhiko Arase.

      Options
      In the field’s Details tab you can change between .gif or .svg formats. If you select .svg you will have the option to directly output the markup instead of a base64 image. SVG is the default.
      You can also change what is used to generate the QR code and even have several sources. The accepted sources (separated by a comma) are: httpUrl, editUrl, or the name of any text/URL/file/image field.
      If LanguageSupport is installed the compatible sources (httpUrl, text field, ...) will return as many QR codes as there are languages. Note however that when outputting on the front-end, only the languages visible to the user will be generated.
      Formatting
      Unformatted value
      When using $page->getUnformatted("qrcode_field") it returns an array with the following structure:
      [ [ "label" => string, // label used in the admin "qr" => string, // the qrcode image "source" => string, // the source, as defined in the configuration "text" => string // and the text used to generate the qrcode ], ... ] Formatted value
      The formatted value is an <img>/<svg> (or several right next to each other). There is no other markup.
      Should you need the same markup as in the admin you could use:
      $field = $fields->get("qrcode_field"); $field->type->markupValue($page, $field, $page->getUnformatted("qrcode_field")); But it’s a bit cumbersome, plus you need to import the FieldtypeQRCode's css/js. Best is to make your own markup using the unformatted value.
      Static QR code generator
      You can call FieldtypeQRCode::generateQRCode to generate any QR code you want. Its arguments are:
      string $text bool $svg Generate the QR code as svg instead of gif ? (default=true) bool $markup If svg, output its markup instead of a base64 ? (default=false) Hooks
      Please have a look at the source code for more details about the hookable functions.
      Examples
      $wire->addHookAfter("FieldtypeQRCode::getQRText", function($event) { $page = $event->arguments("page"); $event->return = $page->title; // or could be: $event->return = "Your custom text"; }) $wire->addHookAfter("FieldtypeQRCode::generateQRCodes", function($event) { $qrcodes = $event->return; // keep everything except the QR codes generated from editUrl foreach($qrcodes as $key => &$qrcode) { if($qrcode["source"] === "editUrl") { unset($qrcodes[$key]); } } unset($qrcode); $event->return = $qrcodes; })
    • By Sebi
      AppApiFile adds the /file endpoint to the AppApi routes definition. Makes it possible to query files via the api. 
      This module relies on the base module AppApi, which must be installed before AppApiFile can do its work.
      Features
      You can access all files that are uploaded at any ProcessWire page. Call api/file/route/in/pagetree?file=test.jpg to access a page via its route in the page tree. Alternatively you can call api/file/4242?file=test.jpg (e.g.,) to access a page by its id. The module will make sure that the page is accessible by the active user.
      The GET-param "file" defines the basename of the file which you want to get.
      The following GET-params (optional) can be used to manipulate an image:
      width height maxwidth maxheight cropX cropY Use GET-Param format=base64 to receive the file in base64 format.
    • By MarkE
      This fieldtype and inputfield bundle was built for storing measurement values within a field, rendering them in a variety of formats and converting them to other units or otherwise modifying them via the API.
      The API consists of a number of predefined functions, some of which include...
      render() for rendering the measurement object, valueAs() for converting the value to another unit value, convertTo() for converting the whole measurement object to different units, and add() and subtract() for for modifying the stored value by the value (converted as required) in another measurement. In the admin the inputfield includes a checkbox (which can be optionally disabled) for converting values on page save. For an example if a value was typed in as centimeters, the unit was changed to metres, and the page saved with this checkbox selected, said value would be automatically converted so that e.g. 170 cm becomes 1.7 m.

      A simple length field using Fieldtype Measurement and Inputfield Measurement.
      Combination units (e.g. feet and inches) are also supported.
      Please note that this module is 'proof of concept' at the moment - there are limited units available and quite a lot of code tidying to do. More units will be added shortly.
      See the GitHub at https://github.com/MetaTunes/FieldtypeMeasurement for full details and updates.
    • By tcnet
      File Manager for ProcessWire is a module to manager files and folders from the CMS backend. It supports creating, deleting, renaming, packing, unpacking, uploading, downloading and editing of files and folders. The integrated code editor ACE supports highlighting of all common programming languages.
      https://github.com/techcnet/ProcessFileManager

      Warning
      This module is probably the most powerful module. You might destroy your processwire installation if you don't exactly know what you doing. Be careful and use it at your own risk!
      ACE code editor
      This module uses ACE code editor available from: https://github.com/ajaxorg/ace

      Dragscroll
      This module uses the JavaScript dragscroll available from: http://github.com/asvd/dragscroll. Dragscroll adds the ability to drag the table horizontally with the mouse pointer.
      PHP File Manager
      This module uses a modified version of PHP File Manager available from: https://github.com/alexantr/filemanager
       
    • By tcnet
      This module implements the website live chat service from tawk.to. Actually the module doesn't have to do much. It just need to inserted a few lines of JavaScript just before the closing body tag </body> on each side. However, the module offers additional options to display the widget only on certain pages.
      Create an account
      Visit https://www.tawk.to and create an account. It's free! At some point you will reach a page where you can copy the required JavaScript-code.

      Open the module settings and paste the JavaScript-code into the field as shown below. Click "Submit" and that's all.

      Open the module settings
      The settings for this module are located int the menu Modules=>Configure=>LiveChatTawkTo.

       
×
×
  • Create New...