Jump to content

Tracy Debugger


adrian

Recommended Posts

47 minutes ago, EyeDentify said:

Hello Again.

I Get a "Copy" option on any pages under the Root in pagelist.

I am going to uninstall Tracy Debugger and install it again and see what happens.
Cause some things have been acting strange like the image upload issue i postet about a short while ago then went away.

I will think about the server access thing.
 

I uninstalled TracyDebugger and removed any directorys in the modules directory under my site path.

And i reinstalled it and the same Error is there again.

I can´t seem to find a solution right now.

I will have to see what your next move is.

Link to comment
Share on other sites

2 minutes ago, EyeDentify said:

I will have to see what your next move is.

I need to know whether the page list COPY button also works without an error.  Sorry, just saw that reply.

Other than that, I'm afraid my only other move is to look at the server directly because I don't understand the filecompiler problem without those other things I asked you to test also being a problem, because they are all coming from PW calls to set_time_limit.

  • Like 1
Link to comment
Share on other sites

Just now, adrian said:

I need to know whether the page list COPY button also works without an error.

Other than that, I'm afraid my only other move is to look at the server directly because I don't understand the filecompiler problem without those other things I asked you to test also being a problem, because they are all coming from PW calls to set_time_limit.

Sorry i looked closer in Tracy and found this error:
error_tracydebugg.thumb.png.258cf38e7646101064222c3f59f225d4.png

  • Like 1
Link to comment
Share on other sites

Just now, EyeDentify said:

Sorry i looked closer in Tracy and found this error:

No worries - good to know 🙂

I think this really means that you need to figure out how to get one.com to change that setting, or move to a decent host. I just think there are going to be other issues with using them, not just this one. I know that's not what you want to hear, but cheap shared hosting just ain't worth it. I would really recommend a Digital Ocean or Linode VPS - they are really cheap and if you install an admin panel on top, you won't even need to spend much time on the command line if you're not up for it, although you might actually enjoy it if you experiment 🙂

  • Like 2
Link to comment
Share on other sites

1 minute ago, adrian said:

No worries - good to know 🙂

I think this really means that you need to figure out how to get one.com to change that setting, or move to a decent host. I just think there are going to be other issues with using them, not just this one. I know that's not what you want to hear, but cheap shared hosting just ain't worth it. I would really recommend a Digital Ocean or Linode VPS - they are really cheap and if you install an admin panel on top, you won't even need to spend much time on the command line if you're not up for it, although you might actually enjoy it if you experiment 🙂

Yeah i have been looking into Linode, but all the jargon and such is a bit scary.

I don´t know what to pick when i only need a simply hosting solution for my own personal website and project.

Also it´s the issue with making the right DNS settings and such to is it not?

But if you could point me in the right direction on a Linode to a good budget choice for beginners i would be greatful.

Though i have payed one.com for the year so i guess have to wait to switch again.

And have used Lets Encrypt for my SSL, is that easy to use with Linode and the Control panel thing you where talking about?

I know a little commandline, but it´s would be nice with a GUI for it.

I thank you for all your help.

I will talk with one.com and see what they say about it.

 

Link to comment
Share on other sites

Chances are you'll be fine with the $5 / month plan: https://www.linode.com/pricing/

The DNS stuff is mostly just a matter of pointing your domain to the IP address of your linode.

I don't have any significant experience with control panels, but server pilot sounds like a decent choice, but perhaps others will chime in.

I set up LetsEncrypt via the certbot tool on the command line, but there might be a way to do that via on of these control panels.

If one.com won't change that setting, perhaps they'll give you your money back 🙂

  • Like 1
Link to comment
Share on other sites

22 minutes ago, adrian said:

Chances are you'll be fine with the $5 / month plan: https://www.linode.com/pricing/

The DNS stuff is mostly just a matter of pointing your domain to the IP address of your linode.

I don't have any significant experience with control panels, but server pilot sounds like a decent choice, but perhaps others will chime in.

I set up LetsEncrypt via the certbot tool on the command line, but there might be a way to do that via on of these control panels.

If one.com won't change that setting, perhaps they'll give you your money back 🙂

I will consider all options.

But also it seems foolish to make any sudden moves when it over all works fine so far.
It´s just the TracyDebugger thats has been acting up.

Thanks again @adrian for all the help.

Let us know if you make changes to the TracyDebugger module to work with our hostings.

Have a nice day.

Link to comment
Share on other sites

6 minutes ago, EyeDentify said:

It´s just the TracyDebugger thats has been acting up.

If it only was Tracy then I'd be keener to work on a fix, but in reality there is only one piece of code from Tracy that is causing the problems and you can disable that by unchecking the "Versions List" option here:

image.png.2cb6cb1edc97c2a23361b7b9d0cbe6a7.png

The errors in the other two panels are due to PW's file compiler which I can't fix but they should go away after reloading the page because the file compiler shouldn't have to run again if the code for those panels is already cached. Note that the filecompiler will also throw these errors on other modules that don't define the PW namespace, but again they should only show the first time the files are accessed, or if they are updated in the future. Do you see that, or does the filecompiler error keep occurring on subsequent page loads?

  • Like 1
Link to comment
Share on other sites

9 hours ago, adrian said:

If it only was Tracy then I'd be keener to work on a fix, but in reality there is only one piece of code from Tracy that is causing the problems and you can disable that by unchecking the "Versions List" option here:

image.png.2cb6cb1edc97c2a23361b7b9d0cbe6a7.png

The errors in the other two panels are due to PW's file compiler which I can't fix but they should go away after reloading the page because the file compiler shouldn't have to run again if the code for those panels is already cached. Note that the filecompiler will also throw these errors on other modules that don't define the PW namespace, but again they should only show the first time the files are accessed, or if they are updated in the future. Do you see that, or does the filecompiler error keep occurring on subsequent page loads?

Hey @adrian and Good morning, (at least it is in sweden of time of writing this).

I did what you said and unchecked the "Versions List" option in TracyDebugger Configuration.

The error persists i am afraid. (I only have Console panel enabled, and the error is about the "set_time_limit()" again)

Can i force PW to cache the module files again with the file compiler?
 

Link to comment
Share on other sites

Unchecking Versions List will only fix the error in the PW Info panel. The error for the Console Panel is not coming from the Console panel - it doesn't use set_time_limit() - the call to set_time_limit() is in the File Compiler module which shouldn't be updating its cache unless the Console Panel file code is changed, which it shouldn't be. Maybe you could try commenting out this line (https://github.com/processwire/processwire/blob/f9337d77a5fc9ae0cdd9486261768b102347bfd0/wire/core/FileCompiler.php#L384) and see if that fixes things without breaking the compilation process.

  • Like 1
Link to comment
Share on other sites

45 minutes ago, adrian said:

Unchecking Versions List will only fix the error in the PW Info panel. The error for the Console Panel is not coming from the Console panel - it doesn't use set_time_limit() - the call to set_time_limit() is in the File Compiler module which shouldn't be updating its cache unless the Console Panel file code is changed, which it shouldn't be. Maybe you could try commenting out this line (https://github.com/processwire/processwire/blob/f9337d77a5fc9ae0cdd9486261768b102347bfd0/wire/core/FileCompiler.php#L384) and see if that fixes things without breaking the compilation process.

Hey @adrian

I will take a look at commenting that line.

I also did some investigating and when i run ini_get_all() and looked at the output and found this:

[max_execution_time] => Array
(
    [global_value] => 50
    [local_value] => 50
    [access] => 7
)

Could this have anything to do with the set_time_limit(120) freaking out?

 

Link to comment
Share on other sites

1 minute ago, adrian said:

Looks fine to me. This is what I get:

image.png.3f0b849d68380a45a178e96b4497268d.png

The issue is that one.com is preventing code from changing it which is why the PW core filecompiler is causing that error.

If they have not disabled set_time_limit() then how are they preventing it from running?

Link to comment
Share on other sites

7 hours ago, EyeDentify said:

If they have not disabled set_time_limit() then how are they preventing it from running?

They have disabled it, just not via disable_functions line. I don't know how they have done it, but if you google: php "due to system policy"

you'll see lots of results, so it must be a fairly common thing on budget hosting.

  • Like 2
Link to comment
Share on other sites

Hello @adrian

I am back with another issue.
This time with the Console panel and a strange behavior.

For some strange reason it seems when i save a snippet all the code gets put on one single line.
This is not what i wanted, i looked for some kind of setting in TracyDebugger config but can´t figure it out.

I attached to screenshots showing what happens.
Nr 1 is where i put my code and save it.
Nr 2 is when i load the snippet and it shows up on a single line.

Do you have any idea to why this happens?

Image 1

console_behavior_img1.thumb.png.e0f7d4ad4b5bd1919e96e95fa83d9993.png

Image 2

console_behavior_img2.thumb.png.9dc7072a5f4efa1b0f1e3149405e06bd.png

 

Thanks in advance.

Link to comment
Share on other sites

1 hour ago, EyeDentify said:

Yes @adrian that did the trick 🙂 everything back to normal 🙂

Good to hear 🙂

There's actually another new version just posted which improves ACE mode detection and whether the current code matches the saved version after a page reload.

  • Like 1
Link to comment
Share on other sites

On 4/18/2020 at 7:41 PM, adrian said:

Good to hear 🙂

There's actually another new version just posted which improves ACE mode detection and whether the current code matches the saved version after a page reload.

Downloaded the update.

But could you share what "ACE mode detection" means?

Link to comment
Share on other sites

9 hours ago, EyeDentify said:

But could you share what "ACE mode detection" means?

ACE Editor is what the Console panel uses and it has different modes for different languages and there is also a regular and inline php mode depending on whether the code starts with <?php or not. I have just improved detection of the mode to use when loading up snippets.

Link to comment
Share on other sites

  • adrian pinned and locked this topic
  • adrian unpinned and pinned this topic
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Similar Content

    • By MarkE
      This fieldtype and inputfield bundle was built for storing measurement values within a field, rendering them in a variety of formats and converting them to other units or otherwise modifying them via the API.
      The API consists of a number of predefined functions, some of which include...
      render() for rendering the measurement object, valueAs() for converting the value to another unit value, convertTo() for converting the whole measurement object to different units, and add() and subtract() for for modifying the stored value by the value (converted as required) in another measurement. In the admin the inputfield includes a checkbox (which can be optionally disabled) for converting values on page save. For an example if a value was typed in as centimeters, the unit was changed to metres, and the page saved with this checkbox selected, said value would be automatically converted so that e.g. 170 cm becomes 1.7 m.

      A simple length field using Fieldtype Measurement and Inputfield Measurement.
      Combination units (e.g. feet and inches) are also supported.
      Please note that this module is 'proof of concept' at the moment - there are limited units available and quite a lot of code tidying to do. More units will be added shortly.
      See the GitHub at https://github.com/MetaTunes/FieldtypeMeasurement for full details and updates.
    • By tcnet
      File Manager for ProcessWire is a module to manager files and folders from the CMS backend. It supports creating, deleting, renaming, packing, unpacking, uploading, downloading and editing of files and folders. The integrated code editor ACE supports highlighting of all common programming languages.
      https://github.com/techcnet/ProcessFileManager

      Warning
      This module is probably the most powerful module. You might destroy your processwire installation if you don't exactly know what you doing. Be careful and use it at your own risk!
      ACE code editor
      This module uses ACE code editor available from: https://github.com/ajaxorg/ace

      Dragscroll
      This module uses the JavaScript dragscroll available from: http://github.com/asvd/dragscroll. Dragscroll adds the ability to drag the table horizontally with the mouse pointer.
      PHP File Manager
      This module uses a modified version of PHP File Manager available from: https://github.com/alexantr/filemanager
       
    • By tcnet
      This module implements the website live chat service from tawk.to. Actually the module doesn't have to do much. It just need to inserted a few lines of JavaScript just before the closing body tag </body> on each side. However, the module offers additional options to display the widget only on certain pages.
      Create an account
      Visit https://www.tawk.to and create an account. It's free! At some point you will reach a page where you can copy the required JavaScript-code.

      Open the module settings and paste the JavaScript-code into the field as shown below. Click "Submit" and that's all.

      Open the module settings
      The settings for this module are located int the menu Modules=>Configure=>LiveChatTawkTo.

       
    • By tcnet
      Session Viewer is a module for ProcessWire to list session files and display session data. This module is helpful to display the session data of a specific session or to kick out a logged in user by simply delete his session file. After installation the module is available in the Setup menu.

      The following conditions must be met for the module to work properly:
      Session files
      Session data must be stored in session files, which is the default way in ProcessWire. Sessions stored in the database are not supported by this module. The path to the directory where the session files are stored must be declared in the ProcessWire configuration which is by default: site/assets/sessions.
      Serialize handler
      In order to transform session data easier back to a PHP array, the session data is stored serialized. PHP offers a way to declare a custom serialize handler. This module supports only the default serialize handlers: php, php_binary and php_serialize. WDDX was dropped in PHP 7.4.0 and is therefore not supported by this module as well as any other custom serialize handler. Which serialize handler is actually used you can find out in the module configuration which is available under Modules=>Configure=>SessionViewer.

      Session data
      The session data can be displayed in two different ways. PHP's default output for arrays print_r() or by default for this module nice_r() offered on github: https://github.com/uuf6429/nice_r. There is a setting in the module configuration if someone prefers print_r(). Apart from the better handling and overview of the folded session data the output of nice_r() looks indeed nicer.

      Links
      ProcessWire module directory
      github.com
    • By Robin S
      Repeater Easy Sort
      Adds a compact "easy-sort" mode to Repeater and Repeater Matrix, making those fields easier to sort when there are a large number of items.
      The module also enhances Repeater Matrix by allowing a colour to be set for each matrix type. This colour is used in the item headers and in the "add new" links, to help visually distinguish different matrix types in the inputfield.
      Screencasts
      A Repeater field

      A Repeater Matrix field with custom header colours

      Easy-sort mode
      Each Repeater/Matrix item gets an double-arrow icon in the item header. Click this icon to enter easy-sort mode.
      While in easy-sort mode:
      The items will reduce in width so that more items can be shown on the screen at once. The minimum width is configurable in the field settings. Any items that were in an open state are collapsed, but when you exit easy-sort mode the previously open items will be reopened. You can drag an item left/right/up/down to sort it within the items. The item that you clicked the icon for is shown with a black background. This makes it easier to find the item you want to move in easy-sort mode. You can click an item header to open the item. An "Exit easy-sort mode" button appears at the bottom of the inputfield. Configuration
      In the field settings for Repeater and Repeater Matrix fields you can define a minimum width in pixels for items in easy-sort mode. While in easy-sort mode the items will be sized to neatly fill the available width on any screen size but will never be narrower than the width you set here.
      In the field settings for Repeater Matrix you can define a custom header colour for each matrix type using an HTML "color" type input. The default colour for this type of input is black, so when black is selected in the input it means that no custom colour will be applied to the header.
      Exclusions
      The easy-sort mode is only possible on Repeater/Matrix fields that do not use the "item depth" option.
       
      https://github.com/Toutouwai/RepeaterEasySort
      https://processwire.com/modules/repeater-easy-sort/
×
×
  • Create New...