Recently Updated Topics

Hello @Juergen, me again and sorry for bothering you in this regards... Adding the privacy checkbox including a standard text phrase referencing the gdpr website link works in English, but how can I display a German version of this? It is there in the translation, but I didn't figure out to get this working. I can partly achieve this by adding a custom field name holding the German text, but then the link to the referenced gdpr-page disappears. As a workaround I just overwrote the original english text phase in /Formelements/Inputelements/Inputs/defaults/Privacy.php to get the job done. But I think there must be a more handy way to achieve this? Another upcoming challenge would be to implement a multi-page form, where the user should shall enter form data in consecutive steps/pages, being able to go back and forth. On the last page I'd like to output all entered data to be confirmed as correct before submitting the form. Could this use case also be done using FrontendForms? Many thanks in advance!

It's a great module either way!

@BigRed I experienced this & in my case I pinned it down to the $config->httpHosts = array('xxxxxxxxxxx'); in config.php not matching the sub-domain I has hosting the new site on. Sorry if I've stated the obvious & e.g. adding www. when it wasn't required.

Thank you for the link. I am a bit concerned that it specifically mentions "Padloper 2", and I can see our version being "0.0.9". Does it still apply? George

@ryan The $config->debug is set to true. The errors.txt is a hefty 257,8MB file.... The last lines are 2025-10-06 22:26:49 ? https://www.birthfactdeathcalendar.net/places/hobart-tasmania-australia/ Fatal Error: Class ProcessWire\FieldtypeImage contains 2 abstract methods and must therefore be declared abstract or implement the remaining methods (ProcessWire\FieldtypeHasFiles::hasFiles, ProcessWire\FieldtypeHasFiles::getFilesPath) (line 18 of /home/birthfac/www/wire/modules/Fieldtype/FieldtypeImage/FieldtypeImage.module) 2025-10-06 22:26:55 ? http://birthfactdeathcalendar.net/events/18-june-2024/ Fatal Error: Class ProcessWire\FieldtypeImage contains 2 abstract methods and must therefore be declared abstract or implement the remaining methods (ProcessWire\FieldtypeHasFiles::hasFiles, ProcessWire\FieldtypeHasFiles::getFilesPath) (line 18 of /home/birthfac/www/wire/modules/Fieldtype/FieldtypeImage/FieldtypeImage.module) 2025-10-06 22:27:03 ? http://birthfactdeathcalendar.net/people/van-zon-hans/ Fatal Error: Class ProcessWire\FieldtypeImage contains 2 abstract methods and must therefore be declared abstract or implement the remaining methods (ProcessWire\FieldtypeHasFiles::hasFiles, ProcessWire\FieldtypeHasFiles::getFilesPath) (line 18 of /home/birthfac/www/wire/modules/Fieldtype/FieldtypeImage/FieldtypeImage.module) 2025-10-06 22:27:08 ? https://www.birthfactdeathcalendar.net/places/holmby-hills-california-united-states-232-mapleton-drive/ Fatal Error: Class ProcessWire\FieldtypeImage contains 2 abstract methods and must therefore be declared abstract or implement the remaining methods (ProcessWire\FieldtypeHasFiles::hasFiles, ProcessWire\FieldtypeHasFiles::getFilesPath) (line 18 of /home/birthfac/www/wire/modules/Fieldtype/FieldtypeImage/FieldtypeImage.module) 2025-10-06 22:27:11 ? http://birthfactdeathcalendar.net/events/31-august-1986-b/ Fatal Error: Class ProcessWire\FieldtypeImage contains 2 abstract methods and must therefore be declared abstract or implement the remaining methods (ProcessWire\FieldtypeHasFiles::hasFiles, ProcessWire\FieldtypeHasFiles::getFilesPath) (line 18 of /home/birthfac/www/wire/modules/Fieldtype/FieldtypeImage/FieldtypeImage.module) 2025-10-06 22:27:19 ? https://birthfactdeathcalendar.net/events/dates/november/4-november/ Fatal Error: Class ProcessWire\FieldtypeImage contains 2 abstract methods and must therefore be declared abstract or implement the remaining methods (ProcessWire\FieldtypeHasFiles::hasFiles, ProcessWire\FieldtypeHasFiles::getFilesPath) (line 18 of /home/birthfac/www/wire/modules/Fieldtype/FieldtypeImage/FieldtypeImage.module) The wire is now 3.0.246, uploaded from processwire-30246-master. It's now visible if you go to the site. In this log there are still 11 or 12 errors per minute, so I presume there are still bots targeting the site. Apart from the Amazon bot mentioned earlier I also stopped Google Search Console, so it's hard to tell where they keep coming from.

Yes, there is one minor issue :: https://github.com/wikimedia/less.php/issues/131 But it works with the latest version of UIkit!

Thanks to both of you. I did not see the custom paths module. This may work indeed, I will test it, as this is fortunately not a multi-lingual site. And yes, the name property is an option, I could rewrite the navigation module. But knowing the client, I am sure he will want exception for this flat url approach.

Last week I was on a boat, far from any computer, so that’s why there weren’t any updates. This week I’m back in the office and back to work on the core. The focus has been primarily on optimizations and issue fixes (see dev branch commit log). There were also a couple commits related to PHP 8.4 support. Issue fixes and optimizations will likely continue to get more focus as we get closer to our next main/master version.There are also some Pro module updates in the works as well. Have a great weekend!

Framework 16 daily driver here, excellent choice. Linux? Do it! Outstanding support on the hardware and once you settle in you'll wonder how you ever had to endure Windows.

New feature in StripePaymentLinks (v 1.0.7) 🎉 Hi, everyone! We’ve just added a sync helper to the modules config screen that can pull past Stripe Checkout Sessions into ProcessWire. Super handy if you want to… backfill older purchases migrate existing users or just double-check what’s in Stripe vs. what’s in PW How it works: Scans Stripe sessions (with date range + email filter if you like) Matches them to PW users by email Creates missing users (optional) Creates/updates purchase repeater items exactly like live checkouts Has a test-run mode so you can preview before writing You get a nice report right on the config screen (below "Sync now") with totals and per-session actions (SKIP, LINKED, UPDATE, CREATE) plus the line items. Makes it a lot easier to keep things in sync — especially if you had sales before installing the module. Note: since each run fetches sessions and line items directly from Stripe’s API, the total duration depends on network + Stripe’s response times. In our tests with ~120 sessions the sync took about 15 seconds. Grab the latest version and give it a spin. We already tested this version on some live projects and everything works fine, but always backup before you mess with data 😉 Feedback welcome! 🙌 Cheers, Mike

Thank you! I guess that is just the way things work. I re-generated the token inside my facebook app and replaced it in the module settings. Then, after 30 minutes the Instagram Feed was working again. The token auto-renews from time to time but it seems that in some rare cases you have to simply generate a new one.

@vmo - even though PW uses pages and "repeater_" templates to house the content of repeater fields, I believe that the noLang setting of the page that contains the repeater field should handle this because you're not typically meant to adjust settings of those "repeater_" templates directly. I doubt @ryan will get to this thread so it might be worth posting a Github issue and see what he says there.

Hi, well actually, as when displaying breadcrums i use <?php foreach($page->parents() as $parent): ?> i think that while looping through the parents array, something like <?php foreach($page->parents() as $pid => $parent) { $position = $pid + 1; //except if you want your position starting by 0 } ?> would do the job $pid being different from $parent->id of course hope it may help 🙂 have a nice day

Ty! I've had it working like this (skeleton code, in ready.php): $wire->addHookAfter('Page::addable', function(HookEvent $event) { $parent = $event->object; $tplArg = $event->arguments(0); $tplName = $tplArg instanceof Template ? $tplArg->name : (string) $tplArg; if($parent->template->name !== 'user-articles') return; $rep = $parent->get('repeater_publish_dates'); $hasDates = ($rep && count($rep) > 0); if(!$hasDates) { $event->return = false; } }); Pretty much 1:1 what you wrote.

Outstanding work! I also appreciate the botany refresher, this module is useful and educational.

I've been considering accessibility constraints quite a bit lately, and in doing a little research, I haven't found any PHP-based PDF generation library supports the PDF/UA standard. With countries outside the US having more stringent accessibility and privacy standards, can PDFs generated through mPDF be considered accessible (with a little work on behalf of the developer)? I'm currently using mPDF in a smaller capacity, but RockPDF definitely offers some compelling features! RELATED: Unfortunately it seems that form fields are definitely not compatible from mPDF-generated PDFs due to the v1.4 PDF standard being used. I work in an industry that doesn't want to use the web, and desperately intends to keep digital documents, so I was looking to see if FormBuilder could be used to export as PDF, but that appears to not be the case (when accessibility is concerned). As most (open-source) PDF generation libraries have borrowed or forked code from one another, I doubt any would offer accessible/compatible forms.

As more or less expected our host says there are no problems or errors caused by them. In the server logs I see two repeated errors: [Tue Sep 30 22:46:25 2025] [X-OVHRequest-Id: 7bd91c71e88c4eaaf8f23be0ca59b7dd] [error] [client 34.174.180.159:0] [host www.birthfactdeathcalendar.net] AH10141: FastCGI: comm with server "/homez.863/birthfac/www/index.php" aborted: idle timeout (160 sec) [Tue Sep 30 22:46:25 2025] [X-OVHRequest-Id: 7bd91c71e88c4eaaf8f23be0ca59b7dd] [error] [client 34.174.180.159:0] [host www.birthfactdeathcalendar.net] AH10149: FastCGI: incomplete headers (0 bytes) received from server "/homez.863/birthfac/www/index.php" In the ProcessWire error log I see two repeated errors: Fatal Error: Uncaught Error: Class "FieldtypeText" not found in /wire/modules/Fieldtype/FieldtypePageTitle.module:17 Stack trace: and many: Error: Exception: SQLSTATE[HY000] [1203] User birthfacbfdcal already has more than 'max_user_connections' active connections In /wire/core/WireDatabasePDO.php line 549 In the Files-error log repeated: unlink: Unable to unlink file: /site/assets/cache/LazyCronLock.cache

well, if you restrain the template access it won't be proposed to add/edit a page and a user who hs obnly access to certain templates/pages don't have access at all à the templates, this is a supreadmin feautre 🙂 have a look when logged as a non superadmin user

Good luck to the Craft team, but to me it looks like they need to reinvent the wheel every now and then. Luckily, we have our own genius, Ryan, who figured that reinventing the wheel is not for everyone. At least not for us ;)