Jump to content
horst

WireMailSmtp

Recommended Posts

@horst, @LostKobraki - thanks! Excellent module - tested/works perfectly.

Share this post


Link to post
Share on other sites

Hi.

I have moved my site to another VPS and now I get "Error in hnsmtp::send : cannot connect to smtp-server!".

Differences in VPS: php 5.4 -> 5.6 and http->https. Can it be the issue in my case or I must dig in other place?

p.s. I can connect to smtp server in console with

#openssl s_client -crlf -connect smtp.yandex.ru:465

so it is not a firewall I guess.

Share this post


Link to post
Share on other sites

I had a similar situation a couple of months ago when I tried to upgrade my domains to PHP 5.6.x on my web host.  I never resolved this issue and ended up reverting to PHP 5.5.x

Note:  The following is what I found out by using Goggle search.  It may apply or not apply to your situation, however I hope that maybe it will cause others to chime in on possible solutions

All encrypted client streams now enable peer verification by default. By default, this will use OpenSSL's default CA bundle to verify the peer certificate. In most cases, no changes will need to be made to communicate with servers with valid SSL certificates, as distributors generally configure OpenSSL to use known good CA bundles. - OpenSSL changes in PHP 5.6.x (PHP Manual)

It appears that in PHP 5.6.0 (at least the version in Debian jessie, with openssl 1.0.1h-3), this function is now validating SSL certificates (in a variety of ways). First, it appears to fail for untrusted certificates (i.e. no matching CA trusted locally), and secondly, it appears to fail for mismatched hostnames in the request and certificate.

"PHP 5.6 now verifies SSL certificates, the "fsockopen" function fails in the "ConnectToHost" method due to mismatched certificate CN (expects host name, but IP is given instead)." -Klemen (PHP 5.6 compatibility)

The problem is that this change is resulting in an error on Email Class SMTP protocol:

fsockopen(): SSL operation failed with code 1. OpenSSL Error messages: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed

When you update to PHP 5.6+ the "CA Root" have to be set, or OpenSSL certificate verify don't work correctly.

Step One: Install CA_Root (In my case, on FreeBSD 10, via Ports)
/usr/ports/security/ca_root_nss

After install, the Pem Cert will be located at:
/usr/local/etc/ssl/cert.pem

Step Two: Add to php.ini the openssl.cafile

openssl.cafile = /usr/local/etc/ssl/cert.pem

Restart your HTTP Server, and verify with phpinfo()

References:     http://stackoverflow.com/questions/27622427/codeigniter-2x-email-class-smtp-ssl-verification-bug-on-php-5-6
                    http://www.phpclasses.org/discuss/package/14/thread/78/
                    http://php.net/manual/en/migration56.openssl.php
  • Like 1

Share this post


Link to post
Share on other sites

@cstevensjr thanks for your answer, it point me to the right direction.

The problem is in old version of smtp class: Certificate is issued to hostname, but smtp class sends IP. In the last version it was fixed and works fine for me now on php5.6.

@horst, update smtp class, please.

http://www.phpclasses.org/package/14-PHP-Sends-e-mail-messages-via-SMTP-protocol.html

  • Like 2

Share this post


Link to post
Share on other sites

Many thanks! I have updated the repo!

  • Like 2

Share this post


Link to post
Share on other sites

@horst - just in case you missed it: https://github.com/horst-n/WireMailSmtp/issues/3

I believe I have setup my Github the wrong way, I get notify messages for allmost everything, but not for issues of my own repos. I haven't seen it, but will look into it now.

Edited by horst
  • Like 1

Share this post


Link to post
Share on other sites

There seems to be something was changed with the newer smtp class that we have changed 2 weeks ago. But anyways, it seems to be fixed now.

@Pete, please can you have a look to it? I haven't changed anything on the behave of To-Recipients, only CC and BCC.

  • Like 1

Share this post


Link to post
Share on other sites

Thanks horst - saw your updates on Github so will have a look tonight :)

Share this post


Link to post
Share on other sites

Just tested and with the latest change you made it works perfectly - thanks!

  • Like 1

Share this post


Link to post
Share on other sites

How can I get the sender Emailaddress set in the config of the module, from a template or module?

Thank you?

Share this post


Link to post
Share on other sites

That's it.

$data = wire('modules')->getModuleConfigData('WireMailSmtp');
echo $data['sender_email'];
echo $data['sender_name'];

Thank you

Share this post


Link to post
Share on other sites

I can't believe I've not thanked you Horst for this module. I've been using it for about a year, linked to Mandrill, a match made in heaven ^_^ and no false-positive spam rejected emails.

Thank you again, cheers, -Alan.

  • Like 1

Share this post


Link to post
Share on other sites

having some trouble with CC, i'm supplying an array, like this:

$mail->cc($array);

and i know my array is good, and CC works for 1 CC (I have $mail->sendSingle(true); )

but it will only CC the last member of the array, no matter which array type i input.

......

OK - forget this, i just updated to the latest version and this was fixed...

Share this post


Link to post
Share on other sites

First time using this module and I get this error:

"it is not supported any of the authentication mechanisms required by the server"

The SMTP server is an open relay restricted by sender IP, no authentication required.

I have tested using PHPMailer succesfully.

Any ideas?

Share this post


Link to post
Share on other sites

First time using this module and I get this error:

"it is not supported any of the authentication mechanisms required by the server"

The SMTP server is an open relay restricted by sender IP, no authentication required.

I have tested using PHPMailer succesfully.

Any ideas?

Can you please provide some information regarding your setup for this website (versions of PHP/ProcessWire, type of hosting used, the hosting provider/or whether local hosted)?  Have you followed the instructions from your hosting provider regarding SMTP setup details, if not locally hosted?

Share this post


Link to post
Share on other sites

Can you please provide some information regarding your setup for this website (versions of PHP/ProcessWire, type of hosting used, the hosting provider/or whether local hosted)?  Have you followed the instructions from your hosting provider regarding SMTP setup details, if not locally hosted?

It appears this code as part of smtp.php, generates a false positive in my case (no authentication required)

While the test fails, the module still sends mail correctly.

if($success
&& strlen($mechanism)==0)
{
   $this->error="it is not supported any of the authentication mechanisms required by the server";
   $success=0;
}

Commenting out $success will make the test pass, but probably not a good idea.

Nothing special about the hosting enviroment, as I said all email scripts, the normal wireMail() works, along with PHPMailer.

The issue is the SMTP server does not require authentication, which seems to be a requirement of the smtp.php as above, which in turn causes the test of the module to fail.

Share this post


Link to post
Share on other sites

The important thing is that the emails are processed and work.  I believe if wireMail() is working then this module is working (as it uses wireMail()). 

If you could open an issue on Github, the module creator/maintainer can have a look at the issue you are reporting.

  • Like 2

Share this post


Link to post
Share on other sites

+1 what cstevensjr said re Github.

Re the problem, it sounds like the module assumes some authentication will be required (not surprised that it assumes this, surprised there's SMTP services which don't require auth).

On a general note, this module providing as it does a way to send mail via Mandrill.com, has been a life saver for me. No more lost emails due to recipients email systems assuming an email from a tiny unknown host is spam (as Mandrill delivers millions of emails their reputation is superb and so emails invariably get to their destination w/o getting rejected).

  • Like 2

Share this post


Link to post
Share on other sites

Hey, you are all right. We have had another issue with authentication and the test, where the original SMTP-class also allowed the missing of authentication. In this regard, the user could successfully pass the test (connecting to the server, IP + Port) without providing authentication credentials.

Therefore I have hacked the original class with this code you have posted above. (assuming there will be no open relay servers out there in 2015) But yep, now you comes along here. :lol:

I will have a closer look to it and provide a better fix. (apropriate for both situations). In the meantime you can A) comment the part in the code, or B) don't use the test anymore on tis server.

Thanks for your help.

  • Like 1

Share this post


Link to post
Share on other sites

This has nothing to do with WireMailSmtp but I have a question:

Can't wrap my head around this... The module is not autoloading, only extending WireMail, but it loads on demand... I'm lost :-)

Share this post


Link to post
Share on other sites

Have a look into Functions.php line 805, function wireMail():

	$mail = null; 
	$modules = wire('modules'); 

	// attempt to locate an installed module that overrides WireMail
	foreach($modules as $module) {
		$parents = class_parents("$module"); 
		if(in_array('WireMail', $parents) && $modules->isInstalled("$module")) { 
			$mail = wire('modules')->get("$module"); 
			break;
		}
	}
	// if no module found, default to WireMail
	if(is_null($mail)) $mail = new WireMail(); 

:lol:

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Gadgetto
      Status update links (inside this thread) for SnipWire development will be always posted here:
      2019-11-15 2019-10-18 2019-08-08 2019-06-15 2019-06-02 2019-05-25 If you are interested, you can test the current state of development:
      https://github.com/gadgetto/SnipWire
      Please note that the software is not yet intended for use in a production system (alpha version).
      If you like, you can also submit feature requests and suggestions for improvement. I also accept pull requests.
      ---- INITIAL POST FROM 2019-05-25 ----
      I wanted to let you know that I am currently working on a new ProcessWire module that fully integrates the Snipcart Shopping Cart System into ProcessWire. (this is a customer project, so I had to postpone the development of my other module GroupMailer).
      The new module SnipWire offers full integration of the Snipcart Shopping Cart System into ProcessWire.
      Here are some highlights:
      simple setup with (optional) pre-installed templates, product fields, sample products (quasi a complete shop system to get started immediately) store dashboard with all data from the snipcart system (no change to the snipcart dashboard itself required) Integrated REST API for controlling and querying snipcart data webhooks to trigger events from Snipcart (new order, new customer, etc.) multi currency support self-defined/configurable tax rates etc. Development is already well advanced and I plan to release the module in the next 2-3 months.
      I'm not sure yet if this will be a "Pro" module or if it will be made available for free.
      I would be grateful for suggestions and hints!
      (please have a look at the screenshots to get an idea what I'm talking about)
       




    • By Robin S
      I have had this module sitting in a 95% complete state for a while now and have finally made the push to get it out there. Thanks to @teppo for his Hanna Code Helper module which I referred to and borrowed from during development.
      http://modules.processwire.com/modules/hanna-code-dialog/
      https://github.com/Toutouwai/HannaCodeDialog
      HannaCodeDialog
      Provides a number of enhancements for working with Hanna Code tags in CKEditor. The main enhancement is that Hanna tags in a CKEditor field may be double-clicked to edit their attributes using core ProcessWire inputfields in a modal dialog.
      Requires the Hanna Code module and >= ProcessWire v3.0.0.
      Installation
      Install the HannaCodeDialog module using any of the normal methods.
      For any CKEditor field where you want the "Insert Hanna tag" dropdown menu to appear in the CKEditor toolbar, visit the field settings and add "HannaDropdown" to the "CKEditor Toolbar" settings field.
      Module configuration
      Visit the module configuration screen to set any of the following:
      Exclude prefix: Hanna tags named with this prefix will not appear in the CKEditor toolbar dropdown menu for Hanna tag insertion. Exclude Hanna tags: Hanna tags selected here will not appear in the CKEditor toolbar dropdown menu for Hanna tag insertion. Background colour of tag widgets: you can customise the background colour used for Hanna tags in CKEditor if you like. Dialog width: in pixels Dialog height: in pixels Features
      Insert tag from toolbar dropdown menu
      Place the cursor in the CKEditor window where you want to insert your Hanna tag, then select the tag from the "Insert Hanna tag" dropdown.

      Advanced: if you want to control which tags appear in the dropdown on particular pages or templates you can hook HannaCodeDialog::getDropdownTags. See the forum support thread for examples .
      Edit tag attributes in modal dialog
      Insert a tag using the dropdown or double-click an existing tag in the CKEditor window to edit the tag attributes in a modal dialog.

      Tags are widgets
      Hanna tags that have been inserted in a CKEditor window are "widgets" - they have a background colour for easy identification, are protected from accidental editing, and can be moved within the text by drag-and-drop.

      Options for tag attributes may be defined
      You can define options for a tag attribute so that editors must choose an option rather than type text. This is useful for when only certain strings are valid for an attribute and also has the benefit of avoiding typos.
      Add a new attribute for the Hanna tag, named the same as the existing attribute you want to add options for, followed by "__options". The options themselves are defined as a string, using a pipe character as a delimiter between options. Example for an existing attribute named "vegetables":
      vegetables__options=Spinach|Pumpkin|Celery|Tomato|Brussels Sprout|Potato You can define a default for an attribute as normal. Use a pipe delimiter if defining multiple options as the default, for example:
      vegetables=Tomato|Potato Dynamic options
      Besides defining static options as above, you can use one Hanna tag to dynamically generate options for another. For instance, you could create a Hanna tag that generates options based on images that have been uploaded to the page, or the titles of children of the page.
      Your Hanna tag that generates the options should echo a string of options delimited by pipe characters (i.e. the same format as a static options string).
      You will probably want to name the Hanna tag that generates the options so that it starts with an underscore (or whatever prefix you have configured as the "exclude" prefix in the module config), to avoid it appearing as an insertable tag in the HannaCodeDialog dropdown menu.
      Example for an existing attribute named "image":
      image__options=[[_images_on_page]] And the code for the _images_on_page tag:
      <?php $image_names = array(); $image_fields = $page->fields->find('type=FieldtypeImage')->explode('name'); foreach($image_fields as $image_field) { $image_names = array_unique( array_merge($image_names, $page->$image_field->explode('name') ) ); } echo implode('|', $image_names); Choice of inputfield for attribute
      You can choose the inputfield that is used for an attribute in the dialog.
      For text attributes the supported inputfields are text (this is the default inputfield for text attributes so it isn't necessary to specify it if you want it) and textarea. Note: any manual line breaks inside a textarea are removed because these will break the CKEditor tag widget.
      Inputfields that support the selection of a single option are select (this is the default inputfield for attributes with options so it isn't necessary to specify it if you want it) and radios.
      Inputfields that support the selection of multiple options are selectmultiple, asmselect and checkboxes.
      You can also specify a checkbox inputfield - this is not for attributes with defined options but will limit an attribute to an integer value of 1 or 0.
      The names of the inputfield types are case-insensitive.
      Example for an existing attribute named "vegetables":
      vegetables__type=asmselect Descriptions and notes for inputfields
      You can add a description or notes to an attribute and these will be displayed in the dialog.
      Example for an existing attribute named "vegetables":
      vegetables__description=Please select vegetables for your soup. vegetables__notes=Pumpkin and celery is a delicious combination. Notes
      When creating or editing a Hanna tag you can view a basic cheatsheet outlining the HannaCodeDialog features relating to attributes below the "Attributes" config inputfield.
      Advanced
      Define or manipulate options in a hook
      You can hook HannaCodeDialog::prepareOptions to define or manipulate options for a Hanna tag attribute. Your Hanna tag must include a someattribute__options attribute in order for the hook to fire. The prepareOptions method receives the following arguments that can be used in your hook:
      options_string Any existing string of options you have set for the attribute attribute_name The name of the attribute the options are for tag_name The name of the Hanna tag page The page being edited If you hook after HannaCodeDialog::prepareOptions then your hook should set $event->return to an array of option values, or an associative array in the form of $value => $label.
      Build entire dialog form in a hook
      You can hook after HannaCodeDialog::buildForm to add inputfields to the dialog form. You can define options for the inputfields when you add them. Using a hook like this can be useful if you prefer to configure inputfield type/options/descriptions/notes in your IDE rather than as extra attributes in the Hanna tag settings. It's also useful if you want to use inputfield settings such as showIf.
      When you add the inputfields you must set both the name and the id of the inputfield to match the attribute name.
      You only need to set an inputfield value in the hook if you want to force the value - otherwise the current values from the tag are automatically applied.
      To use this hook you only have to define the essential attributes (the "fields" for the tag) in the Hanna Code settings and then all the other inputfield settings can be set in the hook.
      Example buildForm() hook
      The Hanna Code attributes defined for tag "meal" (a default value is defined for "vegetables"):
      vegetables=Carrot meat cooking_style comments The hook code in /site/ready.php:
      $wire->addHookAfter('HannaCodeDialog::buildForm', function(HookEvent $event) { // The Hanna tag that is being opened in the dialog $tag_name = $event->arguments(0); // Other arguments if you need them /* @var Page $edited_page */ $edited_page = $event->arguments(1); // The page open in Page Edit $current_attributes = $event->arguments(2); // The current attribute values $default_attributes = $event->arguments(3); // The default attribute values // The form rendered in the dialog /* @var InputfieldForm $form */ $form = $event->return; if($tag_name === 'meal') { $modules = $event->wire('modules'); /* @var InputfieldCheckboxes $f */ $f = $modules->InputfieldCheckboxes; $f->name = 'vegetables'; // Set name to match attribute $f->id = 'vegetables'; // Set id to match attribute $f->label = 'Vegetables'; $f->description = 'Please select some vegetables.'; $f->notes = "If you don't eat your vegetables you can't have any pudding."; $f->addOptions(['Carrot', 'Cabbage', 'Celery'], false); $form->add($f); /* @var InputfieldRadios $f */ $f = $modules->InputfieldRadios; $f->name = 'meat'; $f->id = 'meat'; $f->label = 'Meat'; $f->addOptions(['Pork', 'Beef', 'Chicken', 'Lamb'], false); $form->add($f); /* @var InputfieldSelect $f */ $f = $modules->InputfieldSelect; $f->name = 'cooking_style'; $f->id = 'cooking_style'; $f->label = 'How would you like it cooked?'; $f->addOptions(['Fried', 'Boiled', 'Baked'], false); $form->add($f); /* @var InputfieldText $f */ $f = $modules->InputfieldText; $f->name = 'comments'; $f->id = 'comments'; $f->label = 'Comments for the chef'; $f->showIf = 'cooking_style=Fried'; $form->add($f); } }); Troubleshooting
      HannaCodeDialog includes and automatically loads the third-party CKEditor plugins Line Utilities and Widget. If you have added these plugins to your CKEditor field already for some purpose and experience problems with HannaCodeDialog try deactivating those plugins from the CKEditor field settings.
    • By Robin S
      Sanitizer EasySlugger
      Allows the use of the EasySlugger library as Sanitizer methods.
      Installation
      Install the Sanitizer EasySlugger module.
      Usage
      The module adds four new sanitizer methods.
      slugger($string, $options)
      Similar to $sanitizer->pageName() - I'm not sure if there are any advantages over that method. Included because it is one of the methods offered by EasySlugger.
      $slug = $sanitizer->slugger('Lorem Ipsum'); // Result: lorem-ipsum utf8Slugger($string, $options)
      Creates slugs from non-latin alphabets.
      $slug = $sanitizer->utf8Slugger('这个用汉语怎么说'); // Result: zhe-ge-yong-han-yu-zen-me-shuo seoSlugger($string, $options)
      Augments the string before turning it into a slug. The conversions are related to numbers, currencies, email addresses and other common symbols.
      $slug = $sanitizer->seoSlugger('The price is $5.99'); // Result: the-price-is-5-dollars-99-cents See the EasySlugger readme for some more examples.
      seoUtf8Slugger($string, $options)
      A combination of utf8Slugger() and seoSlugger().
      $slug = $sanitizer->seoUtf8Slugger('价钱是 $5.99'); // Result: jia-qian-shi-5-dollars-99-cents $options argument
      Each of the methods can take an $options array as a second argument.
      separator (string): the character that separates words in the slug. Default: - unique (bool): Determines whether a random suffix is added at the end of the slug. Default: false $slug = $sanitizer->utf8Slugger('这个用汉语怎么说', ['separator' => '_', 'unique' => true]); // Result: zhe_ge_yong_han_yu_zen_me_shuo_3ad66c4  
      https://github.com/Toutouwai/SanitizerEasySlugger
      https://modules.processwire.com/modules/sanitizer-easy-slugger/
    • By Robin S
      If you've ever needed to insert links to a large number of files within CKEditor you may have found that the standard PW link modal is a somewhat slow way to do it.
      This module provides a quicker way to insert links to files on the page being edited. You can insert a link to an individual file, or insert an unordered list of links to all files on the page with a single click.
      CKEditor Link Files
      Adds a menu to CKEditor to allow the quick insertion of links to files on the page being edited.

      Features
      Hover a menu item to see the "Description" of the corresponding file (if present). Click a menu item to insert a link to the corresponding file at the current cursor position. The filename is used as the link text. If you Alt-click a menu item the file description is used as the link text (with fallback to filename if no description entered). If text is currently selected in the editor then the selected text is used as the link text. Click "* Insert links to all files *" to insert an unordered list of links to all files on the page. Also works with the Alt-click option. Menu is built via AJAX so newly uploaded files are included in the menu without the page needing to be saved. However, descriptions are not available for newly uploaded files until the page is saved. There is an option in the module config to include files from Repeater fields in the edited page. Nested Repeater fields (files inside a Repeater inside another Repeater) are not supported. Installation
      Install the CKEditor Link Files module.
      For any CKEditor field where you want the "Insert link to file" dropdown menu to appear in the CKEditor toolbar, visit the field settings and add "LinkFilesMenu" to the "CKEditor Toolbar" settings field.
       
      http://modules.processwire.com/modules/cke-link-files/
      https://github.com/Toutouwai/CkeLinkFiles
    • By David Karich
      ProcessWire InputfieldRepeaterMatrixDuplicate
      Thanks to the great ProModule "RepeaterMatrix" I have the possibility to create complex repeater items. With it I have created a quite powerful page builder. Many different content modules, with many more possible design options. The RepeaterMatrix module supports the cloning of items, but only within the same page. Now I often have the case that very design-intensive pages and items are created. If you want to use a content module on a different page (e.g. in the same design), you have to rebuild each item manually every time.
      This module extends the commercial ProModule "RepeaterMatrix" by the function to duplicate repeater items from one page to another page. The condition is that the target field is the same matrix field from which the item is duplicated. This module is currently understood as proof of concept. There are a few limitations that need to be considered. The intention of the module is that this functionality is integrated into the core of RepeaterMatrix and does not require an extra module.
      Check out the screencast
      What the module can do
      Duplicate a repeater item from one page to another No matter how complex the item is Full support for file and image fields Multilingual support Support of Min and Max settings Live synchronization of clipboard between multiple browser tabs. Copy an item and simply switch the browser tab to the target page and you will immediately see the past button Support of multiple RepeaterMatrix fields on one page Configurable which roles and fields are excluded Duplicated items are automatically pasted to the end of the target field and set to hidden status so that changes are not directly published Automatic clipboard update when other items are picked Automatically removes old clipboard data if it is not pasted within 6 hours Delete clipboard itself by clicking the selected item again Benefit: unbelievably fast workflow and content replication What the module can't do
      Before an item can be duplicated in its current version, the source page must be saved. This means that if you make changes to an item and copy this, the old saved state will be duplicated Dynamic loading is currently not possible. Means no AJAX. When pasting, the target page is saved completely No support for nested repeater items. Currently only first level items can be duplicated. Means a repeater field in a repeater field cannot be duplicated. Workaround: simply duplicate the parent item Dynamic reloading and adding of repeater items cannot be registered. Several interfaces and events from the core are missing. The initialization occurs only once after the page load event Changelog
      1.0.4
      Bug fix: Various bug fixes and improvements in live synchronization Bug fix: Items are no longer inserted when the normal save button is clicked. Only when the past button is explicitly clicked Feature: Support of multiple repeater fields in one page Feature: Support of repeater Min/Max settings Feature: Configurable roles and fields Enhancement: Improved clipboard management Enhancement: Documentation improvement Enhancement: Corrected few typos #1 1.0.3
      Feature: Live synchronization Enhancement: Load the module only in the backend Enhancement: Documentation improvement 1.0.2
      Bug fix: Various bug fixes and improvements in JS functions Enhancement: Documentation improvement Enhancement: Corrected few typos 1.0.1
      Bug fix: Various bug fixes and improvements in the duplication process 1.0.0
      Initial release Support this module
      If this module is useful for you, I am very thankful for your small donation: Donate 5,- Euro (via PayPal – or an amount of your choice. Thank you!)
      Download this module
      > Github: https://github.com/FlipZoomMedia/InputfieldRepeaterMatrixDuplicate
      > PW module directory: https://modules.processwire.com/modules/inputfield-repeater-matrix-duplicate/
×
×
  • Create New...