Jump to content

Recommended Posts

Hi @bot19,

Welcome to the forums. The second error is, yes, as a result of trying to install again whilst there are left over components from the first install that failed. I am not sure why the first one failed. I have never seen that error before. As for cleaning up, normally, if the install had worked, you would have a cleanup menu. Since install failed, that cannot help you now. I have an old gist for such eventualities. I believe it should still work. Please use it to cleanup and then try to re-install Blog. If it fails again, we will debug the issue step-by-step.

Edited by kongondo

Share this post


Link to post
Share on other sites

Hey @kongondo, thanks! I've been browsing here for a while but couldn't contribute much as a newbie so I've only just signed up now.

I downloaded the cleaner file, changed it to .php, associated it with a page and accessed the page to run it (only way I knew how to do this). It seems successful from the screen attached. 

I guess we will need to debug it. Thank you for your help!

I'm using browsersync so it has an external port I can provide for you, as well as access to the CMS. I'm happy to do it together at a time when you're free, as I can make any changes you need  to debug.

Thanks again very much!

Screen Shot 2017-10-30 at 11.05.55 am.png

Share this post


Link to post
Share on other sites
7 hours ago, bot19 said:

I downloaded the cleaner file, changed it to .php, associated it with a page and accessed the page to run it (only way I knew how to do this). It seems successful from the screen attached.

Great. Try and re-install Blog and we'll take it from there.

Share this post


Link to post
Share on other sites
22 hours ago, kongondo said:

Great. Try and re-install Blog and we'll take it from there.

@kongondo

Ah, sorry I just re-read my previous post and noticed I forgot the most important part: I did try a reinstall, but encountered the same error as before :(

Also, the external URL I was talking about only works on the same wifi. If you need to dig around I can work something out. Let me know what's next.

I'll have a look too and see what I can understand.

Thanks!

Share this post


Link to post
Share on other sites

Hi @bot19,

I've been a bit busy with other stuff. I see from your other thread that the issue is not Blog-specific but a general ProcessWire issue. Let's talk there.

Share this post


Link to post
Share on other sites

Hi all. 

I am intending to ONLY support ProcessWire 3.x starting from the next version of this module. Please have a read here and let me know what you think. Thanks.

  • Thanks 1

Share this post


Link to post
Share on other sites

Hi Kongondo!
I am really liking your Blog module (v2.4.1). And I have a question (processwire 3.0.62):
Under the section for Tags, I have a child tag that is parented to /tags/
Then I created a grandchild tag and it is parented to /tags/ but I want to change its parent to /tags/child/

When I try to do so, the UI only shows parent /child/ and when I save I get an error saying that the parent should be /tags/child/

Do I need to do something extra? Or is the parenting child to grandchild broken somehow?

Share this post


Link to post
Share on other sites

Welcome to the forums @Orodreth

Blog does not support grandchild tags, hence the error. I have no current plans to change this behaviour, unfortunately.

Share this post


Link to post
Share on other sites

Love love love your blog module. I have used it multiple times on sites I have built for clients. Recently ran into a weird issue. I installed your latest version of your blog module on latest processwire. When I got to save the settings in the blog quick settings tab, they dont save. The fields reload blank. Any idea?

  • Like 1

Share this post


Link to post
Share on other sites
On 12/6/2017 at 4:40 AM, quickjeff said:

Love love love your blog module. I have used it multiple times on sites I have built for clients.

Glad you like the module.

 

On 12/6/2017 at 4:40 AM, quickjeff said:

Recently ran into a weird issue. I installed your latest version of your blog module on latest processwire. When I got to save the settings in the blog quick settings tab, they dont save. The fields reload blank. Any idea?

I'll have a look when I update the module to support ProcessWire 3 only. Meanwhile, you could try saving the settings directly via their respective pages. Some live in the comments page, etc. Gotta run, so can't provide more info, sorry.

Share this post


Link to post
Share on other sites

I'm, having some issues after putting a site on a live server - maybe someone has an idea as to how to solve this.

 

I moved the site from localhost/pagename to pagename.tld. The blog posts show up in the frontend, so that's fine.

The issues are as follows:
In the admin area, clicking on the "Blog" Tab (which links to pagename.tld/processwire/blog/) results in " The requested process does not exist "

So there's no functionality there. I realize this is basically a 404 in the admin, not sure how to fix that though.

I'm using PW 3.0.75 and the latest blog module version off github, PHP7 on the live server.

Anyone got an idea as to how fix this?

Share this post


Link to post
Share on other sites
7 hours ago, Sebastian said:

I'm using PW 3.0.75 and the latest blog module version off github, PHP7 on the live server.

Hi @Sebastian. What's the difference between your local and remote servers? I have also not tried Blog on PHP 7. 

I'm hoping to move Blog fully to PW3.x sometime soon (maybe early 2018). Maybe then I can test on PHP7.

Share this post


Link to post
Share on other sites
11 hours ago, kongondo said:

Hi @Sebastian. What's the difference between your local and remote servers? I have also not tried Blog on PHP 7. 

I'm hoping to move Blog fully to PW3.x sometime soon (maybe early 2018). Maybe then I can test on PHP7.

Hi @kongondo. Well the difference is that localhost ist still PHP 5.6something :) and there the site runs out of a subfolder.

We're going full PHP7 on servers going forward (I'm guessing that's not uncommon now), so that's maybe something worth keeping an eye on.

I'm not sure if the problem is PHP 7 though - if I find the time i'm gonna setup a fresh page on 7, and install the blog module there - I'll report any findings here.

Share this post


Link to post
Share on other sites

Hey @kongondo - lots of warnings and notices.

I am running php 7.2. I don't see any issue with The requested process does not exist  - that sounds to me like the Process module wasn't installed properly, or the Admin > Blog page somehow has an incorrect Process assigned to. @Sebastian - can you check those?

image.thumb.png.f911a0b933f1175da38f96f1b94a4192.png

Share this post


Link to post
Share on other sites

Thanks @adrian.

I'll have a look. I currently have up to PHP 7.0. It seems I'll need an app that enables me to easily switch versions. I've tried several in the past but none of them worked well so I settled for UwAMP which does have its issues to.

  • Like 1

Share this post


Link to post
Share on other sites
On 10.12.2017 at 5:24 AM, adrian said:

Hey @kongondo - lots of warnings and notices.

I am running php 7.2. I don't see any issue with The requested process does not exist  - that sounds to me like the Process module wasn't installed properly, or the Admin > Blog page somehow has an incorrect Process assigned to. @Sebastian - can you check those?

image.thumb.png.f911a0b933f1175da38f96f1b94a4192.png

Hey adrian,

what I did is export / reimport the DB and copying the files over, as per usual.
I'd gladly check Process assignment wrt Blog, how do I do that?

thanks,
Sebastian

 

Share this post


Link to post
Share on other sites
12 minutes ago, Sebastian said:

I'd gladly check Process assignment wrt Blog, how do I do that?

In the page tree, go to Admin > Blog and EDIT and it should look like this:

image.png.61942b22b84f760dfb83f7fc3b68f359.png

  • Like 1

Share this post


Link to post
Share on other sites

Does anyone know best approach to including the featured image in the post itself? Let’s say below the rendered head of the post? I already have it setup as an option in the blog home page but not the post. 

Thanks!

Share this post


Link to post
Share on other sites
17 hours ago, quickjeff said:

Does anyone know best approach to including the featured image in the post itself? Let’s say below the rendered head of the post?

Apologies I've never gotten round to completing the documentation. Please see the options here.

What you want is post_large_image and possible the other post_large_image_* options. 

Share this post


Link to post
Share on other sites
On 07/10/2017 at 9:27 PM, zkriszti said:

I seem to have another issue, and as far as I've found out (having searched all the way through the forum), this is related to the small version of posts stripping tags. More exactly, I can't get 'post_small_allowable_tags' to work. I just can't seem to get the "view more" anchor appear.

The affected page is a blog-category view (based on the module's blog-category.php), where I get a few post excerpts from a given category, ideally with adding that "view more" tag. Which is nowhere to be found in the output. :(

The relevant parts of my template file look like this:


$options = array('post_small_allowable_tags' => '<p><a>', 'post_more_text' => 'tovább');
$content .= $blog->renderPosts($posts, true, $options);

Then the html output looks like this:


<div class="summary">
  <p>It's my blogpost and here is a 
    <a href="http://...">link to my another article in the text working fine.</a>
    Some more text, some more text, some more text.</p>
</div>

It is strange, because inside .summary I do have <p> and <a> tags, but <a> is only for the content (because there is a link in the referred article itself). But I don't have "view more" at the end of the summary.

Thank you very much for your help in advance!

 

Hi @zkriszti,

Sorry for the very late response. I have not been able to replicate this. It works fine for me as you can see in the following screens Both <p> and <a> if allowed, pass through just fine.

Without 'allowed tags'

blog-allowable-tags-1.thumb.png.657311120250d9712b21a6a7bff53e73.png

With 'allowed tags'

blog-allowable-tags-2.thumb.png.469ff23a253db929427857adfd022b82.png

Share this post


Link to post
Share on other sites

Update: Blog 2.4.2

As of today and this version onward, ONLY ProcessWire 3.x is supported.

Changelog

  1. Support for namespaced ProcessWire only (ProcessWire 3.x).
  2. All ProcessWire Comments Form Options can now be passed as as options to renderComments(). See the options here

Available now in the modules directory.

Please note that this version does not address any of the reported PHP 7.x issues.

  • Like 2

Share this post


Link to post
Share on other sites
On 06/12/2017 at 4:40 AM, quickjeff said:

When I got to save the settings in the blog quick settings tab, they dont save. The fields reload blank. Any idea?

Hi Jeff. I've not encountered this issue. Could you please test the latest (2.4.2) version and let me know if it resolves your issue? What version of PHP are you running? 

Thanks.

Share this post


Link to post
Share on other sites
On 22/07/2017 at 4:15 AM, Claus said:

I’d like to add ‘placeholder’ texts in the name, email, and text input fields of the comment function. How do I do this?

Hi @Claus,

I've now implemented this in Blog version 2.4.2. Pass the options available in Comments Form as part of the third parameter in Blog's renderComments(). E.g. 

$blog = $modules->get("MarkupBlog");
$presets = array('cite'=>'Your Name', 'email'=>'Your Email');
$options = array('headline'=> 'Say something', 'presets'=> $presets, 'presetsEditable' => true);
echo $blog->renderComments($page->blog_comments, 0, $options);

 

Edited by kongondo

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MoritzLost
      This is a new module that provides a simple solution to clearing all your cache layers at once, and an extensible interface to perform various cache-related actions.
      The simple motivation behind this module was that I was tired of manually clearing caches in several places after deploying a change on a live site. The basic purpose of this module is a simple Clear all caches link in the Setup menu which clears out all caches, no matter where they hide. You can customize what exactly the module does through it's configuration menu:
      Expire or delete all cache entries in the database, or selectively clear caches by namespace ($cache API) Clear the the template render cache. Clear out specific folders inside your site's cache directory (/site/assets/cache) Refresh version strings for static assets to bust client-side browser caches (this requires some setup, see the full documentation for details). This is the basic function of the module. However, you can also add different cache management action through the API and execute them through the module's interface. For this advanced usage, the module provides:
      An interface to see all available cache actions and execute them. A system log and logging output on the module page to see verify what the module is doing. A CacheControlTools class with utility functions to clear out different caches. An API to add cache actions, execute them programmatically and even modify the default action. Permission management, allowing you granular control over which user roles can execute which actions. The complete documentation can be found in the module's README.
      Beta release
      Note that I consider this a Beta release. Since the module is relatively aggressive in deleting some caches, I would advise you to install in on a test environment before using it on a live site.
      Let me know if you're getting any errors, have trouble using the module or if you have suggestions for improvement!
      In particular, can someone let me know if this module causes any problems with the ProCache module? I don't own or use it, so I can't check. As far as I can tell, ProCache uses a folder inside the cache directory to cache static pages, so my module should be able to clear the ProCache site cache as well, I'd appreciate it if someone can test that for me.
      Future plans
      If there is some interest in this, I plan to expand this to a more general cache management solution. I particular, I would like to add additional cache actions. Some ideas that came to mind:
      Warming up the template render cache for publicly accessible pages. Removing all active user sessions. Let me know if you have more suggestions!
      Links
      https://github.com/MoritzLost/ProcessCacheControl ProcessCacheControl in the Module directory

    • By joshua
      This module is (yet another) way for implementing a cookie management solution.
      Of course there are several other possibilities:
      - https://processwire.com/talk/topic/22920-klaro-cookie-consent-manager/
      - https://github.com/webmanufaktur/CookieManagementBanner
      - https://github.com/johannesdachsel/cookiemonster
      - https://www.oiljs.org/
      - ... and so on ...
      In this module you can configure which kind of cookie categories you want to manage:

      You can also enable the support for respecting the Do-Not-Track (DNT) header to don't annoy users, who already decided for all their browsing experience.
      Currently there are four possible cookie groups:
      - Necessary (always enabled)
      - Statistics
      - Marketing
      - External Media
      All groups can be renamed, so feel free to use other cookie group names. I just haven't found a way to implement a "repeater like" field as configurable module field ...
      When you want to load specific scripts ( like Google Analytics, Google Maps, ...) only after the user's content to this specific category of cookies, just use the following script syntax:
      <script type="optin" data-type="text/javascript" data-category="statistics" data-src="/path/to/your/statistic/script.js"></script> <script type="optin" data-type="text/javascript" data-category="marketing" data-src="/path/to/your/mareketing/script.js"></script> <script type="optin" data-type="text/javascript" data-category="external_media" data-src="/path/to/your/external-media/script.js"></script> <script type="optin" data-type="text/javascript" data-category="marketing">console.log("Inline scripts are also working!");</script> The type has to be "optin" to get recognized by PrivacyWire, the data-attributes are giving hints, how the script shall be loaded, if the data-category is within the cookie consents of the user. These scripts are loaded asynchronously after the user made the decision.
      If you want to give the users the possibility to change their consent, you can use the following Textformatter:
      [[privacywire-choose-cookies]] It's planned to add also other Textformatters to opt-out of specific cookie groups or delete the whole consent cookie.
      You can also add a custom link to output the banner again with a link / button with following class:
      <a href="#" class="privacywire-show-options">Show Cookie Options</a> <button class="privacywire-show-options">Show Cookie Options</button> This module is still in development, but we already use it on several production websites.
      You find it here: https://github.com/blaueQuelle/privacywire/tree/master
      Download: https://github.com/blaueQuelle/privacywire/archive/master.zip
      I would love to hear your feedback 🙂
      Edit: Updated URLs to master tree of git repo
       
    • By David Karich
      Admin Page Tree Multiple Sorting
      ClassName: ProcessPageListMultipleSorting
      Extend the ordinary sort of children of a template in the admin page tree with multiple properties. For each template, you can define your own rule. Write each template (template-name) in a row, followed by a colon and then the additional field names for sorting.
      Example: All children of the template "blog" to be sorted in descending order according to the date of creation, then descending by modification date, and then by title. Type:
      blog: -created, -modified, title  Installation
      Copy the files for this module to /site/modules/ProcessPageListMultipleSorting/ In admin: Modules > Check for new modules. Install Module "Admin Page Tree Multible Sorting". Alternative in ProcessWire 2.4+
      Login to ProcessWire backend and go to Modules Click tab "New" and enter Module Class Name: "ProcessPageListMultipleSorting" Click "Download and Install"   Compatibility   I have currently tested the module only under PW 2.6+, but think that it works on older versions too. Maybe someone can give a feedback.     Download   PW-Repo: http://modules.processwire.com/modules/process-page-list-multiple-sorting/ GitHub: https://github.com/FlipZoomMedia/Processwire-ProcessPageListMultipleSorting     I hope someone can use the module. Have fun and best regards, David
    • By dimitrios
      Hello,
      this module can publish content of a Processwire page on a Facebook page, triggered by saving the Processwire page.
      To set it up, configure the module with a Facebook app ID, secret and a Page ID. Following is additional configuration on Facebook for developers:
      Minimum Required Facebook App configuration:
      on Settings -> Basics, provide the App Domains, provide the Site URL, on Settings -> Advanced, set the API version (has been tested up to v3.3), add Product: Facebook Login, on Facebook Login -> Settings, set Client OAuth Login: Yes, set Web OAuth Login: Yes, set Enforce HTTPS: Yes, add "https://www.example.com/processwire/page/" to field Valid OAuth Redirect URIs. This module is configurable as follows:
      Templates: posts can take place only for pages with the defined templates. On/Off switch: specify a checkbox field that will not allow the post if checked. Specify a message and/or an image for the post.
      Usage
      edit the desired PW page and save; it will post right after the initial Facebook log in and permission granting. After that, an access token is kept.
       
      Download
      PW module directory: http://modules.processwire.com/modules/auto-fb-post/ Github: https://github.com/kastrind/AutoFbPost   Note: Facebook SDK for PHP is utilized.


×
×
  • Create New...