Jump to content
adrian

Custom Upload Names

Recommended Posts

On 11/22/2018 at 2:37 AM, simonsays said:

Hello 🙂

Sorry, I haven't forgotten - just had other priorities get in the way - I'll try to take a look soon.

Share this post


Link to post
Share on other sites

@adrian Checking "Rename on Save" and inserting the image link inside textarea field via "Insert Link" and then "Select File" and finally saving the page it doesn't update the link. It always lead to the previous filename. Can you please fix it?

  • Like 1

Share this post


Link to post
Share on other sites
4 hours ago, PWaddict said:

@adrian Checking "Rename on Save" and inserting the image link inside textarea field via "Insert Link" and then "Select File" and finally saving the page it doesn't update the link. It always lead to the previous filename. Can you please fix it?

Any chance you are inserting into a multi-language textarea field? If so, then it should be fixed in the latest version. If not, please let me know and I can investigate further.

 

Share this post


Link to post
Share on other sites
40 minutes ago, adrian said:

Any chance you are inserting into a multi-language textarea field? If so, then it should be fixed in the latest version. If not, please let me know and I can investigate further.

 

I was testing it in a NON multi-language textarea field.

Share this post


Link to post
Share on other sites
11 minutes ago, PWaddict said:

I was testing it in a NON multi-language textarea field.

Are you in a repeater or anything else unusual?

Share this post


Link to post
Share on other sites
53 minutes ago, adrian said:

Any chance you are inserting into a multi-language textarea field? If so, then it should be fixed in the latest version.

I just tried it on a multi-language textarea field with the latest version (1.0.11) and it has the same problem.

5 minutes ago, adrian said:

Are you in a repeater or anything else unusual?

Nope

Share this post


Link to post
Share on other sites

If I understand correctly you've updated the part of the module that searches img tags inside textarea. The problem I'm having has nothing to do with img tags cause I do NOT  add the images inside textarea. I only add their LINKS via "Insert Link" and then "Select File".

  • Like 1

Share this post


Link to post
Share on other sites
2 minutes ago, PWaddict said:

I only add their LINKS via "Insert Link" and then "Select File".

Oh sorry, I missed that distinction. I'll see what I can do about supporting that situation.

  • Like 1

Share this post


Link to post
Share on other sites

@PWaddict - it should now work in the latest version.

@simonsays - I think all your repeater issues should also now be fixed - sorry again for the huge delay on this.

  • Like 2

Share this post


Link to post
Share on other sites
13 minutes ago, adrian said:

it should now work in the latest version.

Yep although adding image links on a textarea field that belongs to another page it doesn't update them.

  • Like 1

Share this post


Link to post
Share on other sites
12 hours ago, PWaddict said:

Yep although adding image links on a textarea field that belongs to another page it doesn't update them.

Good point. I am attaching a new version here for you to test. I don't have much time this morning to test it properly, but hopefully this will also handle that.

@simonsays - could also please test this version?

ProcessCustomUploadNames.zip

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, adrian said:

I am attaching a new version here for you to test.

It's almost perfect. There is only 1 small issue:

Assuming that you have 2 tabs open in your browser. The 1st tab has the page where you renaming the image and the 2nd tab has the page with the textarea field where you inserting the image link. If I save the page on the 1st tab and then save the page on the 2nd tab without refreshing it then the old link will be saved and it will never gets updated again until I manually go and select the link via "Insert Link > Select File".

Share this post


Link to post
Share on other sites
4 minutes ago, PWaddict said:

It's almost perfect. There is only 1 small issue:

Assuming that you have 2 tabs open in your browser. The 1st tab has the page where you renaming the image and the 2nd tab has the page with the textarea field where you inserting the image link. If I save the page on the 1st tab and then save the page on the 2nd tab without refreshing it then the old link will be saved and it will never gets updated again until I manually go and select the link via "Insert Link > Select File".

Not really sure that could be dealt with without maintaining a database of filename changes and associated page ids and checking against them whenever a page is changed. If you have a simple approach I am not thinking of, I'd be happy to implement.

Share this post


Link to post
Share on other sites
3 hours ago, adrian said:

Not really sure that could be dealt with without maintaining a database of filename changes and associated page ids and checking against them whenever a page is changed. If you have a simple approach I am not thinking of, I'd be happy to implement.

I've temporarily disabled the rule just to test with PW core function on image linking and it doesn't update image links even if the image and the textarea are on the same page.

EDIT: Should I open issue on GitHub?

Share this post


Link to post
Share on other sites
5 hours ago, adrian said:

ProcessCustomUploadNames.zip

On this version if the image and the textarea are on the same page the image links are not updated. On the 1.0.13 it works ok.

Share this post


Link to post
Share on other sites
41 minutes ago, PWaddict said:

On this version if the image and the textarea are on the same page the image links are not updated. On the 1.0.13 it works ok.

Strange - it seems to be working here. Is there something in your setup that differs from this?

jwZGw4sPhN.thumb.gif.f077a0949d38a3511639a00e8d2dd7ae.gif

Share this post


Link to post
Share on other sites
45 minutes ago, adrian said:

Strange - it seems to be working here. Is there something in your setup that differs from this?

No. I reinstalled the unreleased version again and it's working now but I've noticed that it doesn't always rename the filename when I save the page. On Filename format I'm using this $page->title-[Y-m-d_H-i-s] so I would know if image is renamed. Keep saving the page again and again and you'll notice the issue.

Share this post


Link to post
Share on other sites

@adrian If I use this: [Y-m-d_H-i-s]-$page->title the filename ALWAYS renamed on save but if I use this $page->title-[Y-m-d_H-i-s] or this [Y-m-d_H-i-s] it doesn't.

  • Like 1

Share this post


Link to post
Share on other sites
1 minute ago, PWaddict said:

@adrian If I use this: [Y-m-d_H-i-s]-$page->title the filename ALWAYS renamed on save but if I use this $page->title-[Y-m-d_H-i-s] or this [Y-m-d_H-i-s] it doesn't.

Thanks for the debugging. That actually makes sense because I have a check to not rename files with "-n" extensions because PW's automatic adding of "-n" when there is already a file of the same name. I'll have to see if I can sort out a workaround for this, but I won't be able to look until tomorrow.

  • Like 1

Share this post


Link to post
Share on other sites
23 minutes ago, adrian said:

Thanks for the debugging. That actually makes sense because I have a check to not rename files with "-n" extensions because PW's automatic adding of "-n" when there is already a file of the same name. I'll have to see if I can sort out a workaround for this, but I won't be able to look until tomorrow.

Maybe you should allow the date format [Y-m-d_H-i-s]$file->mtime starting with underscore "_" instead of dash "-".

Share this post


Link to post
Share on other sites
On 11/25/2018 at 9:40 AM, PWaddict said:

Maybe you should allow the date format [Y-m-d_H-i-s]$file->mtime starting with underscore "_" instead of dash "-".

You should be able to specify any PHP date() format you want - if you want to replace those dashes with underscores you can. I think that should take care of the conflict with the "-n" suffix check.

Share this post


Link to post
Share on other sites
36 minutes ago, adrian said:

You should be able to specify any PHP date() format you want - if you want to replace those dashes with underscores you can. I think that should take care of the conflict with the "-n" suffix check.

A dot must be used between fields to work properly and yes about the php date underscores inside the brackets is the solution:

$page->title.[Y_m_d_H_i_s]

$page->title.$file->mtime

Don't forget to update the module with the proper version you posted above and also add the above examples in Rename Rules description. THANKS A LOT 🙂

Share this post


Link to post
Share on other sites
1 minute ago, PWaddict said:

A dot must be used between fields to work properly

I use curly braces, like this:

{$page->title}-[Y_m_d_H_i_s]

 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By teppo
      This module tracks changes, additions, removals etc. of public (as in "not under admin") pages of your site. Like it's name says, it doesn't attempt to be a version control system or anything like that - just a log of what's happened.
      At the moment it's still a work in progress and will most likely be a victim of many ruthless this-won't-work-let's-try-that-instead cycles, but I believe I've nailed basic functionality well enough to post it here.. so, once again, I'll be happy to hear any comments you folks can provide
      https://modules.processwire.com/modules/process-changelog/
      https://github.com/teppokoivula/ProcessChangelog
      How does it work?
      Exactly like it's (sort of) predecessor, Process Changelog actually consists of two modules: Process Changelog and Process Changelog Hooks. Hooks module exists only to serve main module by hooking into various functions within Pages class, collecting data of performed operations, refining it and keeping up a log of events in it's own custom database table (process_changelog.) Visible part is managed by Process Changelog, which provides users a (relatively) pretty view of the contents of said log table.
      How do you use it?
      When installed this module adds new page called Changelog under Admin > Setup which provides you with a table view of collected data and basic filtering tools See attached screenshots to get a general idea about what that page should look like after a while.
      For detailed installation instructions etc. see README.md.
       


    • By Gadgetto
      Status update links (inside this thread) for SnipWire development will be always posted here:
      2019-08-08
      2019-06-15
      2019-06-02
      2019-05-25
      If you are interested, you can test the current state of development:
      https://github.com/gadgetto/SnipWire
      Please note that the software is not yet intended for use in a production system (alpha version).
      If you like, you can also submit feature requests and suggestions for improvement. I also accept pull requests.
      ---- INITIAL POST FROM 2019-05-25 ----
      I wanted to let you know that I am currently working on a new ProcessWire module that fully integrates the Snipcart Shopping Cart System into ProcessWire. (this is a customer project, so I had to postpone the development of my other module GroupMailer).
      The new module SnipWire offers full integration of the Snipcart Shopping Cart System into ProcessWire.
      Here are some highlights:
      simple setup with (optional) pre-installed templates, product fields, sample products (quasi a complete shop system to get started immediately) store dashboard with all data from the snipcart system (no change to the snipcart dashboard itself required) Integrated REST API for controlling and querying snipcart data webhooks to trigger events from Snipcart (new order, new customer, etc.) multi currency support self-defined/configurable tax rates etc. Development is already well advanced and I plan to release the module in the next 2-3 months.
      I'm not sure yet if this will be a "Pro" module or if it will be made available for free.
      I would be grateful for suggestions and hints!
      (please have a look at the screenshots to get an idea what I'm talking about)
       




    • By apeisa
      Update 31.7.2019: AdminBar is now maintained by @teppo. Modules directory entry has been updated, as well as the "grab the code" link below.
      ***
      Latest screencast: http://www.screencas...73-ab3ba1fea30c
      Grab the code: https://github.com/teppokoivula/AdminBar
      ***
      I put this Adminbar thingy (from here: http://processwire.c...topic,50.0.html) to modules section and to it's own topic.
      I recorded quick and messy screencast (really, my first screencast ever) to show what I have made so far. You can see it from here: http://www.screencas...18-1bc0d49841b4
      When the modal goes off, I click on the "dark side". I make it so fast on screencast, so it might seem a little bit confusing. Current way is, that you can edit, go back to see the site (without saving anything), continue editing and save. After that you still have the edit window, but if you click "dark side" after saving, then the whole page will be reloaded and you see new edits live.
      I am not sure if that is best way: there are some strengths in this thinking, but it is probably better that after saving there shouldn't be a possibility to continue editing. It might confuse because then if you make edits, click on dark side -> *page refresh* -> You lose your edits.
      ***
      When I get my "starting module" from Ryan, I will turn this into real module. Now I had to make some little tweaks to ProcessPageEdit.module (to keep modal after form submits). These probably won't hurt anything:
      if($this->redirectUrl) $this->session->redirect($this->redirectUrl); if(!empty($_GET['modal'])) $this->session->redirect("./?id={$this->page->id}&modal=true"); // NEW LINE else $this->session->redirect("./?id={$this->page->id}");   and...
      if(!empty($_GET['modal'])) { $form->attr('action', './?id=' . $this->id . '&modal=true'); } else { $form->attr('action', './?id=' . $this->id); // OLD LINE }  
    • By Mike Rockett
      Jumplinks for ProcessWire
      Release: 1.5.54
      Composer: rockett/jumplinks
      Jumplinks is an enhanced version of the original ProcessRedirects by Antti Peisa.
      The Process module manages your permanent and temporary redirects (we'll call these "jumplinks" from now on, unless in reference to redirects from another module), useful for when you're migrating over to ProcessWire from another system/platform. Each jumplink supports wildcards, shortening the time needed to create them.
      Unlike similar modules for other platforms, wildcards in Jumplinks are much easier to work with, as Regular Expressions are not fully exposed. Instead, parameters wrapped in curly braces are used - these are described in the documentation.
      Under Development: 2.0, to be powered by FastRoute
      As of version 1.5.0, Jumplinks requires at least ProcessWire 2.6.1 to run.
      View on GitLab
      Download via the Modules Directory
      Read the docs
      Features
      The most prominent features include:
      Basic jumplinks (from one fixed route to another) Parameter-based wildcards with "Smart" equivalents Mapping Collections (for converting ID-based routes to their named-equivalents without the need to create multiple jumplinks) Destination Selectors (for finding and redirecting to pages containing legacy location information) Timed Activation (activate and/or deactivate jumplinks at specific times) 404-Monitor (for creating jumplinks based on 404 hits) Additionally, the following features may come in handy:
      Stale jumplink management Legacy domain support for slow migrations An importer (from CSV or ProcessRedirects) Feedback & Feature Requests
      I’d love to know what you think of this module. Please provide some feedback on the module as a whole, or even regarding smaller things that make it whole. Also, please feel free to submit feature requests and their use-cases.
      Note: Features requested so far have been added to the to-do list, and will be added to 2.0, and not the current dev/master branches.
      Open Source

      Jumplinks is an open-source project, and is free to use. In fact, Jumplinks will always be open-source, and will always remain free to use. Forever. If you would like to support the development of Jumplinks, please consider making a small donation via PayPal.
      Enjoy! :)
×
×
  • Create New...