kathep

*bump* Any ideas? ?

Hi all I'm having a similar issue as @janaro. I have used (and loved!) Processwire for a long time. However, I have a new Processwire setup where I am having trouble logging on to the admin page for the first time. I am running Processwire installed as an app on Yunohost, which uses nginx and mariaDB. At first my admin login page didn't show up, but after some tweaking of the nginx .conf files (as recommended here: ) the admin page now appears. So far so good. But entering correct admin credentials has not allowed me to log in successfully for the first time. What I have tried: Attempt 1. Entering log in credentials created at Processwire setup Result 1. Unable to log in. user and password boxes reset. Attempt 2. Checking login username is correct in PHPMyAdmin by running @BitPoet's suggested query: https://processwire.com/talk/topic/26189-reset-admin-password-or-add-superuser-rol/?do=findComment&comment=217767 select `name` from `pages` where `id` = 41; Also checked the 'pages' table: Result 2. Superuser admin name I'm using is correct. Attempt 3. Re-setting credentials via a code snippet added to home.php, as recommended by @ryan in 2012: https://processwire.com/talk/topic/1736-forgot-backend-password-how-do-you-reset/?do=findComment&comment=16163 Downloading the home.php file via SFTP. Adding the php inside the php code brackets at the top of the home.php file. Changing the admin and pass details to my own. Saving home.php locally. Uploading home.php via SFTP. In browser (Safari), refreshing view of my home page: https://domain.tld In browser (Safari), refreshing view of my admin page: https://domain.tld/processwire Entering new login details, press enter. Login page refreshes, deletes entries, does not log me in. Result 3: No errors, but also can't log in using re-set credentials. Attempt 4: Re-setting credentials via a code snippet by @kongondo above: https://processwire.com/talk/topic/26189-reset-admin-password-or-add-superuser-rol/?do=findComment&comment=217911 Result 4: Same steps as before, same result. Attempt 5: Re-setting credentials via a code snippet by @bernhard above: https://processwire.com/talk/topic/26189-reset-admin-password-or-add-superuser-rol/?do=findComment&comment=217769 Result 5: Same steps as before, same result. Attempt 6: Creating a tool.php file and adding code snippet to it as recommended by @Soma here: https://processwire.com/talk/topic/1736-forgot-backend-password-how-do-you-reset/?do=findComment&comment=16133 Result 6: Similar steps as before, but no noticeable change, and no successful login. After this experiment, I deleted tool.php, but even so, my errors all refer to the tool.php file. In PHPMyAdmin I see that I don't have any pages with a template_id of 3. My question is: how do I manually (and safely!) add a page with an id of 3 in PHPMyAdmin so I can (hopefully!) log in to this Processwire install for the first time? And also, if anyone has tips on anything else in my setup or process that I could tweak or try, I would be glad to hear! Thank you for reading. ? --- Update: I found a page for my superuser with id = 3. So next question: is there anything about using nginx with Processwire (an incorrect config perhaps?) that might prevent login details from successfully being setup in the database tables? And how might I fix it?

Excellent @bernhard! I would also buy a promodule, if it allowed the ability to have frontend pages.

Oh good to know! Thanks!

Done! I lost one image field (bummer) that was using the fieldtypeimageextra field. I discovered which field it was from the SQL database, but I couldn't change the image type in the admin interface because I kept getting an error. On the up side, the error messages are all gone and it looks like everything is working fine.

Thanks for the speedy and helpful replies @kixe, @Macrura and @adrian! @adrian great thinking! I am embarrassed to admit I don't know where to find my modules database table. It doesn't seem to be in site/modules or wire/modules folders. Could you point me in the right direction?

Hi @Macrura Yes, modules all refreshed. The challenge is that I do not have any fields that use the fieldtypeimageextra - so I don't know what to change to make the message go away. The site is live. Since I've got so much working in the 3.0.53 version, I'm tempted to keep trying a little bit more before downgrading. But I will downgrade if I can't work out how to add new pages soonish. Oh! And I've removed 'pages2pdf' from all pages too.

After being gently reminded by @adrian here, I recently updated my site from the 2.6.5 to 3.0.53 version of Processwire. I followed the instructions to refresh my admin view repeatedly, and got many messages about modules being updated. Since updating, I have been getting the following errors: 1. Fieldtypeimageextra: the following persistent error code at the top of my admin view: I followed instructions on the FieldtypeImageExtra github page to delete the FieldtypeImageExtra module on my server, and installed the replacement Image Extra module. But I'm not sure what else to do to remove the error. Does anyone have some ideas on how to fix this? 2. Not able to create new pages When I try to publish a new page, I get the following error: Even though no errors are listed on the page - except for the fieldtypeimageextra error - and all required fields have been completed. 3. Error when adding a link in the rich text editor When trying to add a link in the rich text editor I get this error: I'm happy to go in to the code and look at line 374, but I'm wondering: Is there is anything else I should do in the admin panel, or with code on my sites's templates or modules in general, after updating from 2.6.5 to prevent these kind of errors continuing to arise? Or is it such a big problem to update from 2.6.5 to 3.0.53 that I should restore 2.6.5 and then update PW incrementally (ie 2.6.8 then 2.7 then 2.9 etc)?

Ah ok, mystery solved. Thanks for the help Adrian! This shows how I have been neglecting my processwire install for some time. Looking forward to enjoying all the improvements after updating!

There is no 'repeater item labels' section on my details tab. See below - these are the only two options I see above the 'save' button at the end of the screen: I'm using Processwire version 2.6.5 dev. Could the setting you mention only appear in a more recent version of Processwire?

Hi @adrian Thanks for your quick reply. As you see, my repeater is called lesson_plan_section and has a label title of 'section'. Ideally, I would like the label text box to be able to take and process some code that says 'get text entry from the field within the repeater called "subject" and add it here'. Here is my template 'class.php', where I have the repeater field 'lesson plan section'. As you see, each of the repeaters has a name of section #1, section #2 etc. I reguarly work with 20 sections, and the numbers are an unintuitive and awkward way to remember which section is which. This is why I'm looking for a more user friendly solution. Unfortunately, my php skills are beginner, so I have no idea where to start in terms of hacking a solution for myself.

Hi @adrian No. I currently use that, and it is frustrating, leading me to ask my question. What I want is something that will change the label on the field to the text entry of a specific field within my repeater. So when I create a new repeater, and there is a field called 'Title' within the repeater, once I enter text into the title field (for examples sake, let's say I title my repeater 'Introductory Exercise' and click 'save' on the page, the title of the repeater field in the header bar would change to 'Introductory Exercise'.

Very nice! Do you think it is feasible to use this - or a future version - on the front end?

Does anyone know if this possible yet? Ideally, I would like to select the text entry of a specific field within my repeater to appear as the label for each repeater section. Any clues as to how to do this through the GUI greatly appreciated!

Worked perfectly! Thank you @tpr.