frank2014 Posted September 30, 2014 Share Posted September 30, 2014 are there dutch people who wants to help me because my english is not so good.... Link to comment Share on other sites More sharing options...
pwired Posted September 30, 2014 Share Posted September 30, 2014 translation ? First post. Why don´t you introduce your self first, and tell something more about the how and what. 3 Link to comment Share on other sites More sharing options...
frank2014 Posted September 30, 2014 Author Share Posted September 30, 2014 hi i'm Frank i'm 38 years young normaly i make the sites int html, but now therse some one who wants to upload whitout html so i thougt whit a cms is to doe the best.. i've lookd into the net en noticed the processwire was not so hard to learn and still is in progress... so i'm going for it... i have 2 kids an a dog on my profile you can see a few sites that i've made.. i'm not a pro and i'm doing it for fun but now there are more and more people who are asking if i can make some sites.... so what i've done so far and what i've seen so far is realy great.. but my engilsh i hope to learn a lot here 3 Link to comment Share on other sites More sharing options...
horst Posted September 30, 2014 Share Posted September 30, 2014 Welcome to the forums Frank, this is a nice and sometimes funny place here. Do you also have a wife, (besides the two kids and the dog)? Your english is pretty good. Link to comment Share on other sites More sharing options...
Martijn Geerts Posted September 30, 2014 Share Posted September 30, 2014 Welkom Frank ! Thanks for the short introduction. Don't be scared to to make spelling failures, I make them every time. Google translate is a big friend of mine. What do you want to know ? Link to comment Share on other sites More sharing options...
pwired Posted September 30, 2014 Share Posted September 30, 2014 Hi Frank, Welcome to this special place on the internet both forum and processwire. Many experienced members here. Forum is loaded with very informative posts. Find some time to go through the community category posts. Here is one for starters: https://processwire.com/talk/topic/4173-grouped-forum-posts-links-articles-tutorials-code-snippets/ Edit: In your profile the two links to www.mpgrafikx.nl and www.energy-radio.nlare not opening properly (The address wasn't understood) Oh: Can you tell us how you found processwire ? (curious) Link to comment Share on other sites More sharing options...
frank2014 Posted September 30, 2014 Author Share Posted September 30, 2014 strange because the sites are both online..... i found processwire through a forum of a different cms i wanted to work with but i saw that there we no more updates and stuff and processwire was reccomended over there Link to comment Share on other sites More sharing options...
pwired Posted September 30, 2014 Share Posted September 30, 2014 strange because the sites are both online..... Yes they are, only the links in your profile, those are not html links: aim:goim?screenname=www.mpgrafikx.nl msnim:chat?contact=www.energy-radio.nl Link to comment Share on other sites More sharing options...
frank2014 Posted September 30, 2014 Author Share Posted September 30, 2014 ok now i understand what you mean Link to comment Share on other sites More sharing options...
Ivan Gretsky Posted September 30, 2014 Share Posted September 30, 2014 Good day Frank! I think that there are not enough non-English resources about Processwire on the web. This forum is the best place to start and ask questions. And it is in English, as you see. But I think it is worth your time to learn more English and more Processwire, because it seems like modern web technologies just cannot be mastered without those two )) If you need a mentor or some other help in your native language and you are ready to pay for them, you could ask for it in this forum branch. But you always will get the best help in the whole wide Internet for free right here. Just ask substantial questions in the appropriate topics. Welcome! P.S. Try this online translation service. Link to comment Share on other sites More sharing options...
diogo Posted September 30, 2014 Share Posted September 30, 2014 If someone asks someone in a language that is other than English, we usually ask to stick to English, but I don't think we are inflexible with it. I would say, if you have a concrete question, try to ask in English, also because it will raise the chance that someone will answer, but if it becomes too difficult for you to understand or express the doubt it's ok to mix a bit of dutch in between. We have enough Dutch people here to understand it, and probably the German(ic)s will also 4 Link to comment Share on other sites More sharing options...
Joss Posted September 30, 2014 Share Posted September 30, 2014 No Durch though. I have checked behind the sofa and we definitely don't have any Durch. Dutch we have crawling out of the woodwork, however.... 3 Link to comment Share on other sites More sharing options...
frank2014 Posted September 30, 2014 Author Share Posted September 30, 2014 wel i have a contact form in php already is it possible to work whit it because it's from the old site... and yes it's handy to call it dutch typing to fast i thnk 1 Link to comment Share on other sites More sharing options...
Ivan Gretsky Posted September 30, 2014 Share Posted September 30, 2014 Check out these: https://processwire.com/talk/topic/407-processing-contact-forms/?hl=%252Bcreate+%252Bsimple+%252Bcontact+%252Bform#entry3208 https://processwire.com/talk/topic/2089-create-simple-forms-using-api/ http://modules.processwire.com/modules/form-builder/ And try to search the forum before you ask . Link to comment Share on other sites More sharing options...
pwired Posted September 30, 2014 Share Posted September 30, 2014 php form https://processwire.com/talk/topic/407-processing-contact-forms/ https://processwire.com/talk/topic/7731-quick-form/ With the help of the forum I made a full blown form out of it. Link to comment Share on other sites More sharing options...
frank2014 Posted September 30, 2014 Author Share Posted September 30, 2014 wel tryde different thing but it wont work... pffffff but i won't give up 2 Link to comment Share on other sites More sharing options...
frank2014 Posted October 1, 2014 Author Share Posted October 1, 2014 why can't i past my code over here? Link to comment Share on other sites More sharing options...
Martijn Geerts Posted October 1, 2014 Share Posted October 1, 2014 You've to use this: button. Link to comment Share on other sites More sharing options...
frank2014 Posted October 1, 2014 Author Share Posted October 1, 2014 <p align="center"><form action="http://www.video-vlodrop/forms/post.php" enctype="application/x-www-form-urlencoded" method="post"> <p align="center">LET OP!!! <br />Selecteer hieronder de juiste afdeling!!!<br /></p> <p align="center"><select name="select"> <option selected="selected" value="0">Selecteer hier uw afdeling</option> <option value="1">Algemene info</option> <option value="2">Offertes</option> </select></p> <p align="center">Uw Naam: <br /><input name="naam" type="text" /> <br />Uw E-mail: <br /><input name="email" type="text" /></center></p> <p align="center">Uw Bericht:<br /><textarea cols="45" rows="7" name="bericht"></textarea><br /><input name="Submit" type="submit" value="Verzenden" /> <input type="reset" value="Reset dit formulier" /></p> </form> </p> thnx Martijn.. wel this is the code: an when i save it i get p>LET OP!!!<br /> Selecteer hieronder de juiste afdeling!!!</p> <p>Selecteer hier uw afdelingAlgemene infoOffertes</p> <p>Uw Naam:<br /><br /> Uw E-mail:</p> <p>Uw Bericht:<br /> </p> <p> </p> what iam i doing wrong... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now