• Content Count

  • Joined

  • Last visited

Everything posted by vmo

  1. Hi, it is possible to change the order of the fields programmatically on a template? Thank you
  2. It is exactly what I was looking for. Many thanks
  3. Hi, I need to create a script to create a template and the template fields using data from a CSV file using the template and fields API: - The template will have more then 600 fields; - The fields are going to be organized using different FieldsetTabs fields; - There will be FieldsetTabs fileds inside FieldsetTabs. I saw some posts with examples how to create a template and fields using the API but looking to the API I can not figure out what is the correct order to do the steps to create the template and fields and how to organize them into FieldsetTab. What I understand but I am not sure: 1. Create a template 2. Create all FieldsetTabs 3. Create all needed fields 4. Create a Fieldgroup 5. Add all fields to the Fieldgroup 6. Add the Fieldgroup to the template There are any example how to create FieldsetTabs inside FieldsetTabs and fields inside that FieldsetTabs? Thank you
  4. vmo

    Thanks, that is really good to know, I will keep it disabled. Done for now. Will try to debug it asap. All the best
  5. vmo

    Hi @adrian - thank you for the hints to research the issue. I just disabled the "Fields Object" on the Request Info Panel > Panel sections and the issue of the 404 does not appear. I will take time to debug it but right now I need to put everything working for tomorrow and I will give feedback asap. Thank you, all the best
  6. vmo

    Hi @adrian - After disabled the "RequestInfo panel" on the frontend panels stop receiving the 404 errors and after disabled the "RequestInfo panel" on the backend panels the admin navigation and save is normal, does not delay. Any next steps? Thank you
  7. vmo

    Hi, @adrian - the installation is on a cpanel with Apache. The installation is a basic one with a few fields and templates (with no page) and with no modifications done to the original template files. I copied the installation with the issue to another sub-domain and did the following actions: - Disabled all extra site modules - Removed all the custom templates and fields - Only enabled the Tracy module in DEVELOPMENT mode (with no errors and 404 pages) - With the Tracy in DEVELOPMENT mode: I reenabled all the others extra site modules one by one and tested for any errors, delays or 404 pages - After reenabled all the modules no errors, delays or 404 pages were detected. - Recreated the custom templates - Recreated the custom fields After this actions there wasn't datect any issue, but... after added a repeater field to the "home" template the same issue appeared and started again to receive 404 pages and delayed page processing on the admin. I did the following steps to try understand if there was any issue on the repeater field: On the "home" template: - Removed the repeater field from the "home" template - After field was removed, No 404 errors were detected navigating the site - Added again the repeater field to the "home" template and the same issue started - Removed the field On the "basic-page" template: - Added the field to the "basic-page" template - After added the repeater field to the "basic-page" template, no 404 errors were detected navigating in the site Any ideia? I can make a zip of the installation and send it to you, if it helps.
  8. vmo

    Hi, in a new PW install after install the Tracy module and enable the "Development" mode I get strange responses from the site: - On the frontend after clicking on a link the site stays processing and after a while gives a 404 page - On the admin the site stays processing for a while and is slow. I need to select the "Production" mode for the site to able to work. This is strange, the module never had this behaviour. The installation is using: - Processwire 3.0.98 - Tracy Debugger v4.10.22 Right now I do not know if there a module conflict or configuration that is making this behaviour. Thank you
  9. Hi, I have a Processwire installation and when accessing any page it gives 404, page not found. The site is under development and until recent I just was developing the templates and right now I am developing the php and html into the templates files like home.php. The site was recently updated to the version 3.0.89 and I don't if it has something to do with the 404 error. Right now I do not have a clue about was happening, I appreciate if any one have a clue what it might being happening. Thank in advanced.
  10. Many thanks to all, I was getting frustrating about this, saved the day.
  11. Thank you for the wild gess about the languages problem, it seems that the is related to the languages. I had only one language active that was Portuguese, and after added a new language the home was shown correctly, now I need to verify the issue in other pages. Many thank you for help I think now it is just a time issue to verify all the pages and file templates.
  12. The htaccess file is from a processwire instalation. The original htaccess from the version 3.0.89 and the htaccess from the other installation with a lower version are not working, the issue continues.
  13. In the same server I have other processwire site that is working and after replacing the htaccess file from the one that is working the issue continues, back to zero.
  14. You might be right about the htaccess directives, but I do not have much knowledge about the htaccess directives, I will try to verify. Thank you
  15. After comparing the htaccess files from the different updates there is no differences. I am uninstalling modules to verify is ther is a module responsible for this issue. The url address of the site is http://assembleia.pt/. Thank you
  16. vmo

    HI, I am trying to use the Inputfield Chosen Select Multiple in a page reference field that is used in a repeater and when I add a new items to the repeater the multiple select is not rendered, it only shows a multiple select box. I think that the javascript code that renders the field is not triggered after the Ajax load because when turning off the Ajax functionality. Is there a way to make it possible to render the field in a repeater? Thank you
  17. vmo

    This solution did not worked, I tried the solution from @Robin S and worked, many thanks.
  18. vmo

    Hi, many thanks for the code, this works like a charm, saved the day/week
  19. vmo

    Hi, I having a problem with image field inside a repeater field and with extra image fields and user profiles and the AdminOnSteroids. With the superuser profile there is no problem, but the user has other profile then superuser the image in the repeater field does not show the image after upload and do not save the image and the extra image fields does not show correctly (each language in a row) and the internal link selector does not work and does not show any error. After a week trying to understand why the non superuser users where not able to upload the images and creating new fields to verify if the originals ones where with some kind of problem I come to the conclusion that the problem where not the fields on them selfs but with some module that was causing this behavior. After trying to disable the module a tweak the AdminOnSteroids configurations the only thing that work for me was to uninstall the module and the users can upload the image the the extra image fields show correctly. Its is a great module and I hope you can resolve this issue. Thank you
  20. Hi, I Installed the "AutoExportTemplatesAndFields" and when creating repeater fields the module was affecting the fields editing. I had two repeater fields: "repeater1" and "repeater2", the "repeater1" should repeat the "images1" field and the "repeater2" should repeat the "images2", the problem was each time I edited one of them and change the repeated field the other assumed that modification. Example: editing the "repeater1" and change the field to "image3" the "repeater2" instead of having the "image2" has the field to be repeated assumed the field "image3". After uninstall the "AutoExportTemplatesAndFields" module I could edit each repeater and assign different fields to them. I hope you can find the issue it is a great module to use. Thank you.
  21. Hi, I found the problem. After uninstall the module "AutoExportTemplatesAndFields" the problem was solved the repeater fields now have different fields and when I change the field in one does not affect the other repeater fields. Thank you.
  22. Hi, I am creating a template that have two repeater fields: - One for "slideshows" images, other for "highlights" images The field "slideshows" has a "slideshow_images" field (image type) to be repeated and the fields "highlights" should have the field "highlights_images" field (image type) to be repeated. What is happening is when I add the the "slideshow_images" to the field "slideshows" the field "slideshow_images" is also added to the field "highlights" and if I had the field "highlights_images" to the "highlights" field the "slideshow_images" in the field "slideshows" is replaced by the "highlights_images" field. I already deleted all fields and create from scratch and the result is always the same. I am using the Processwire 3.0.39. Can anyone explain what is happening? Thank you
  23. HI, I want to upgrade the processwire from 2.7.3 to 3.0 but I don't know it the installed modules work in the new version. Or if it is better to continue using the 2.7.3 version and wait for the modules upgrades? Thank you
  24. Yes I think that is the best. Make a copy and upgrade it in a test environment. I think everything is going to be smooth but is always the best asking if there was any issue on that. Many thanks