RuiVP

Thanks Adrian, once again.

Hello. Apparently I have a problem with Tracy adminer. Presently using last PW version + PHP 8.5 in my development instalation. At the time of the problem, I don't know what TracyDebugger version I was using. PHP was 8.0 or lower. The problem: I received an email from the server support, telling something like (translated) "Please be advised that the account ‘rumors.pt’ has been found to be overloading the system. You must urgently check and rectify the website’s security." The site is down (I suppose it is suspended for security reasons). Before asking the server admin to reopen it, I would like to know if other similar cases were reported, and, if that's the case, to have your opinion. Here goes the server's imunify360 log from the server: Malicious Reason Status Actions /home/c0010270/.trash/site.1/modules/.TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed Scan type: background Cleaned 12 days ago Original (infected) file will be removed in 2 days /home/c0010270/.trash/site.2/modules/.TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed /home/c0010270/.trash/site.3/modules/.TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed /home/c0010270/.trash/site.4/modules/.TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed /home/c0010270/.trash/site/assets/cache/FileCompiler/site/modules/TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed /home/c0010270/.trash/site/modules/.TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed /home/c0010270/.trash/site/modules/TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed /home/c0010270/rumor.rumors.pt/site/modules/.TracyDebugger/panels/Adminer/adminer-4.8.1-mysql.php SMW-BLKH-SA-CLOUDAV-php.admin.tool.db.adminer-NP118-3 Content removed Remarks: 1) A (new) similar (copied) development version of the site seems to work ok in my computer. 2) In fact this is the second time a PW site maintained by me goes down, apparently caused by external "interferences". I suppose I have to review the security issues and the rules of access to files and folders (presently 755/644). 3) Probably there is no point in keeping Tracy in a public site. What is the common procedure? Wishing you a fine weekend, Rui VP

Thank you for your advises and corrections. I think we're done with this issue.

Sorry, you are too fast for me... Now, I uploaded your new version and went back to PHP8.030. Everything looks fine. Plus, other modules stopped complaining with this PHP version.

Quick test with PHP versions: PHP8.0.30 -- test <?php echo "<p>que chatice</p>" ?> -- result: "Exception: Cannot access non-public property Tracy\FileSession::$file on line: 95 in C:\wamp64\www\cadpp.org\site\modules\TracyDebugger\includes\CodeProcessor.php" PHP8.5.6 -- seems to work ok in general and with Tracy, but some modules seem to need adaptation to the new PHP version: Errors resulting from deprecated instructions in some modules: Deprecated: mb_convert_encoding(): Handling HTML entities via mbstring is deprecated; use htmlspecialchars, htmlentities, or mb_encode_numericentity/mb_decode_numericentity instead in ...\TextformatterFluidImages\TextformatterFluidImages.module:52 Deprecated: Use of "self" in callables is deprecated in ...\TextformatterSoundmanager\TextformatterSoundmanager.module:582 Deprecated: mb_convert_encoding(): Handling HTML entities via mbstring is deprecated; use htmlspecialchars, htmlentities, or mb_encode_numericentity/mb_decode_numericentity instead in ...\TextformatterFluidImages\TextformatterFluidImages.module:52 Once again, thank you for your titanic effort to adapt Trac to PW!

Solved! (apparently...) I downloaded PHP 8.1.34 and 8.2.30 for Wampserver. 8.2.30 raises some problems and errors on PW and/or some modules. With 8.1.34 Tracy stops complaining and shows no errors. I need more time to check out effects on other modules. Thank you, Adrian

Solved! I could install the module and get the site running. Now, trying to make a simple test (just echoing a line of html) I have a new problem (possibly my fault?) with error:

Thank you for your swift answer, @adrian . Just to be sure and to avoid the nth trouble with installing/uninstalling: I downloaded the new version last week. Is there a new version since then? (sorry, I don't know in what file inside the module zip I can find the version number) and: where can we find old versions of the modules? (for example, in case the new one rise some incompatibilities with other modules, PHP version, etc.) Once again, thank you for your trouble answering me.

Hello. I used to work with TracyDebugger in my development site (Windows 10 home + Wampserver + PHP 8.0.30). When I tried to update the module, I got error "Call to undefined method Tracy\Helpers::getNonce()" I also get in Tracy's report: From there on, I couldn't access anymore any site page. The only solution to keep working was to delete Tracy's folder in module folder. This means I can't even clear database data from this module. Can you figure out what is going on? Thanks in advance, but please take into consideration that I'm not a programmer.

My mistake. Some old hanna codes are working. But introducing new ones and autocomplete is not working.

Thanks, I followed your advise and everything seems to work ok until now.

Hi, I'm afraid to migrate my text fields from ckeditor to tinyMCE because I have a few hundred pages possibly with hanna code markup. Will tinyMCE wipe out hanna code markup? And, in that case, is there a tested solution to keep those pages integrity? Is it possible to add a button or a menu (in tinymce) to insert and edit hanna code? Or do I have to hard code it in the code window?

Thanks, Gideon So.

Ups... OK, I found the garbage icon on the images. Still, I don't know if there is a replacement utility.

I need to replace some images in a page and also to delete some images in the page - I mean in a field: images. I can't find an easy way to do that, specially from the point of view of someone editing the page. What am I missing?

My mistake! You are right, it works as perfectly. It also works for align_center, of course. Simple and brilliant. Problem solved. Thank you, you applied a lot of effort and time to crack my problem. (my silly mistake: I was injecting in Firefox ".align-left" instead of ".align_left") Thank you again! Community is a wonderful thing.

@Jan Romeromany thanks for your effort! Unfortunately it doesn't work as expected. It is equivalent (I think) to Ryan's CSS trick "figure {width:1px;}". I tend to believe there is no CSS solution for this problem, because, as far as I know, CSS doesn't have ascendant selectors (something like "parent < child {some: rule}"). Although I'm not sure, I think I would be able to build some HannaCode to 1) accept an img, 2) accept a width attribute, 3) insert the img it inside a figure, 4) add a figcaption and 5) retro-style the figure element accordingly to the img width - and finally render the whole thing. However, that would force the editor to make a tricky choice of images based on image:n. That's not comfortable and, in a non-profit, pro bono, voluntary site like this, that would make editors run away, according to my experience. Maybe the only practical solution is the good(?) old table with 2 rows: one for img, another for caption, specifying a table width. That's fairly practical to do in CKEditor.

@Jan RomeroIn fact I would like to keep the freedom to choose the image size in each case, not to «normalize» the images. Using the inspector in Mozilla, I confirm that the right way to do it would be to style the figure element (not the img element) on a each case basis. But I don't know how to do it through the images field or how to change the module to get there. Hopping someone has an idea to help me.

My question is about the appearance of images and captions (inside a figure element) in the frontend. As far as I know, CKEdit has a different mechanism/styling and I'm not worried about it. Of course, if I take the trouble to manually insert an image and a caption inside a table, and configure the table, etc., the problem goes away, but... isn't it the automatic procedures and machine help what we are all hopping for, for the sake/save of time and work? My relevant CSS: .align_left { /* for images placed in rich text editor */ float: left; margin: 0 1em 1em auto; position: relative; top: 0.5em; max-width: 50%; } .align_right { /* for images placed in rich text editor */ float: right; margin: 0 auto 1em 1em; max-width: 50%; } .align_center, .align_center img { /* for images placed in rich text editor */ display: table; margin-left: auto; margin-right: auto; /*position: relative;*/ /*top: 0.5em;*/ } figure { display: table; /* width: 1px; */ margin: 1em auto; } figure.featured_image { margin: 0; width: 100%; } figure img { display: table-row; /*margin-bottom: 0.5em;*/ } figure figcaption { display: table-row; font-size: smaller; color: #777; line-height: 1.4em; } .align_center figcaption { text-align: center; margin: auto; } The base site is https://cadpp.org/ . It is meant to be a very simple (simplistic?) site, without bells and whistles. An example of the problem I'm trying to report would be https://cadpp.org/artigos/a-mundializacao/#this-is-bad-graphics Please note that I will undo this image caption example as soon as possible, because it is breaking my page. Before preparing this example for you, and in order to turn around the problem, I manually broke the caption into 3 lines, using <br/>. Also notice that the only thing preventing the caption from occupying all the container width is the fact that I added a limit to the right|left-aligned images in the CSS file (max-width: 50%;).

Hi, I'm having a problem, but I'm not sure if I am missing some configuration items or if this is a internal feature to the images modules. Here goes my problem (sorry if I'm not able to explain it in a synthetic way): When I insert a img with figcaption in the body text (through the images field), the caption doesn't fit the image width. Meaning: Suppose the image is centred and 50% wide relative to the #content container, but the caption being very long, it spreads to 100% of the available space. The same thing happens if the image is left/right aligned to text. This is graphically wrong (according to the usual typographic rules) and visually confusing, because you cannot distinguish immediately the caption from the following normal body text. Apparently, this means the figure element (defined as a display=table in the default css) expands to the entire available space, exceeding the image width. Shouldn't the width, in the images module, be assigned to the figure element (table or otherwise), instead of the img element? Or... am I missing something in the configuration/use of the images field?

Many thanks, Ryan.

OK, I already figured out I should replace 'localhost' with 'mysite.org', (The problem was that on first try to solve, I wrote 'https://mysite.org') And I put on the config->httpHosts = array('localhost', 'mysite.org'); or should I write array('localhost', 'https://mysite.org', 'http://mysite.org') ? or should I change the order? I don't know exactly how to do it (I simply try by error and success), but I already understood that with certain configurations, ckeditor, for example, looses track of mystyles.js.

HI, I developed a site in a local machine and now I transposed it to a server. Until now everything seems to work fine. However, there is a problem on edit mode: I can change the fields, save them, but when i click the «view» button, it directs to https://localhost/somepage (which goes no where) instead of https://mysite.org/somepage The only way to get back on track is to handwrite the right address on the address bar of the browser. In config.php I have: $config->dbHost = 'localhost'; $config->dbName = 'xxxxxx'; $config->dbUser = 'xxxxxx'; $config->dbPass = 'xxxxxx'; $config->dbPort = '3306'; and $config->httpHosts = array('localhost'); What should I do to get the base address all the time?

Oh my... My mistake, the bug was on me... Please forget this message or, even better, erase it, to avoid my shame. Just to clarify: I am using the same function in several templates, to render the tags, and the bug was in there: function commatedList(PageArray $items) { $out = ""; if($items) { foreach ($items as $item) { if($item == $items[0]) { $out .= "<a href='{$item->url}'>{$item->title}</a>"; } else { $out .= ", <a href='{$item->url}'>{$item->title}</a>"; } } } return $out; } As you can imagine, the problem was: $out .= "<a href='{$item->url}>'>{$item->title}</a>"; Also: it may be bad programming, I know, but anyway I'm not a programmer, so...

I have an input field PageReference in my templates. It is meant to work as tags and it references pages with a «etiquete» (=tag) template. I can input new references and they render fine in the page, but the url renders wrong. As an exemple, I get: <a href='/mysite/mytags/sometag/>'>sometag</a> instead of <a href='/mysite/mytags/sometag/'>sometag</a> I'm building the site in a Wamp local server. Working with PW 3.x Is it a bug or may I be doing something wrong?