Jump to content

Map Marker Map

Recommended Posts

On 12/23/2018 at 9:54 PM, mel47 said:


I have a problem that I didn't have before (not sure when was "before" though...). However all last year' pages displayed a correct localization.

If I typed an address, it will not localized until I check/uncheck the geocode true/false. However, saving the page doesn't retain the "ok rooftop" result, and return to "request denied". After a couple of saving pages, I eventually get lat/long saved but the status is still "request denied".

Furthermore, I discovered I can't modify addresses on certain pages (those created by guest (form builder)). It may be related to my similar problem about image undeletable.

Under 3.0.123, both local and production. Google API is enabled for billing. Anyway, address with a previous correct localization are displayed fine.


I found a workaround, related to an other issue. I ended by moving the order of fields.
BTW, no error in console.


Share this post

Link to post
Share on other sites

Maybe I'm missing something, but now, where once Google maps were working, I get a message saying that Google maps did not load correctly.  I believe it is because Google now requires an api key.  But I can't see where to put an api key into the markupgooglemaps module.  How do I make maps work again?


Share this post

Link to post
Share on other sites

My API key is configured correctly in FieldtypeMapMarker. I have the same problem than kbutler64 tough... Saying that Google maps did not load correctly on each map.

These are the error I get in Chrome inspector:

util.js:221 Google Maps JavaScript API warning: NoApiKeys https://developers.google.com/maps/documentation/javascript/error-messages#no-api-keys
lw.m @ util.js:221
util.js:221 Google Maps JavaScript API warning: SensorNotRequired https://developers.google.com/maps/documentation/javascript/error-messages#sensor-not-required
lw.m @ util.js:221

As requested by the module document, i added this line in the head: 

<script type='text/javascript' src='https://maps.googleapis.com/maps/api/js?sensor=false'></script>

Google now says it's not required.. I also notice this code,required by Google API, it not loaded in the page.  

<script async defer src="https://maps.googleapis.com/maps/api/js?key=YOUR_API_KEY&callback=initMap"

What should I do?

Share this post

Link to post
Share on other sites


This field holds 3 pieces of data. The address, longitude and latitude. The latter two are numerical data which does not need translation. The address field is what is send to Google to get the coordinates. I do not think there is an easy way to make it multilingual (it is not now as far as I know). But there is always a way to store multilingual address information in other fields of the same page, and use this information to generate marker descriptions (for example) for each language needed.

Share this post

Link to post
Share on other sites

Hey everyone,

I did see, that other users were struggling with the problem, that there are no Markers displayed in the frontend, but I could not find any replies to that problem. 
If I render a map, the coordinates are correct, but the marker icon is not displayed. It displays in the backend, but not in the frontend, also if if but the path to a custom image in the map options. Nothing. 
Does anyone have the same problem?

Thanks for any hints

Share this post

Link to post
Share on other sites


I have a recurrent problem of an error " 'MarkupGoogleMap' was used before it was defined. ". In some browser, the map display correctly but in some (IE) it just doesn't work.

I put the code in a JS validator, and I have the same error, but I don't know why and what I'm supposed to do, since I didn't play with this JS code. I also have " Expected 'mgmap1' at column 1, not column 37. "


    	<script async defer src="https://maps.googleapis.com/maps/api/js?key=MYKEY"  type="text/javascript"></script>

<div id='mgmap1' class='MarkupGoogleMap' style='width: 100%; height: 250px;'></div><script type='text/javascript'>

var mgmap1 = new MarkupGoogleMap(); mgmap1.setOption('zoom', 19); mgmap1.setOption('mapTypeId', google.maps.MapTypeId.ROADMAP); mgmap1.setHoverBox('<div data-top="-10" data-left="15" style="background: #000; color: #fff; padding: 0.25em 0.5em; border-radius: 3px;"></div>');mgmap1.init('mgmap1', 45.558225, -73.551839); mgmap1.addMarker(0.000000, 0.000000, '/programmation/facebook-live-avec-les-squelettes-de-baleines/', 'Facebook live avec les squelettes de baleines!', ''); mgmap1.addMarker(0.000000, 0.000000, '/programmation/concours-journalisme-scientifique-plume-de-science/', 'Concours journalisme scientifique - Plume de science', ''); mgmap1.addMarker(0.000000, 0.000000, '/programmation/grand-defi-quebecoiseaux-2019/', 'Grand Défi QuébecOiseaux 2019', ''); mgmap1.addMarker(0.000000, 0.000000, '/programmation/lodyssee-des-sciences-jeunesse/', 'L&#039;Odyssée des sciences jeunesse', ''); mgmap1.addMarker(47.837513, -69.536392, '/programmation/presentoir-science/', 'Présentoir science', ''); mgmap1.addMarker(46.020489, -73.044777, '/programmation/observation-des-oiseaux-de-proie-en-migration/', 'Observation des oiseaux de proie en migration', ''); mgmap1.addMarker(48.442829, -68.519707, '/programmation/rassemblement-scientifique-a-rimouski/', 'Rassemblement scientifique à Rimouski', ''); mgmap1.addMarker(48.451046, -68.525238, '/programmation/vitrine-exposition-livres-et-objets-thematiques/', 'Vitrine &amp; exposition: livres et objets thématiques', ''); mgmap1.addMarker(48.548431, -71.650375, '/programmation/des-avions-en-papier-inusites/', 'Des avions en papier inusités', ''); mgmap1.addMarker(48.684093, -72.487625, '/programmation/on-a-marche-sur-la-lune-50-ans-deja/', 'On a marche sur la Lune, 50 ans déjà', ''); mgmap1.addMarker(48.430279, -71.063011, '/programmation/soiree-dobservation-astronomique/', 'Soirée d&#039;observation astronomique', ''); mgmap1.addMarker(48.410259, -71.268867, '/programmation/pop-et-pigments/', 'Pop et pigments', ''); mgmap1.addMarker(46.836414, -71.214966, '/programmation/excursion-dobservation-des-oiseaux/', 'Excursion d&#039;observation des oiseaux', ''); mgmap1.addMarker(46.836414, -71.214966, '/programmation/connaitre-les-oiseaux-communs-qui-nous-entourent/', 'Connaître les oiseaux communs qui nous entourent', ''); mgmap1.addMarker(46.732670, -71.444519, '/programmation/excursion-ornithologique-guidee/', 'Excursion ornithologique guidée', ''); mgmap1.addMarker(46.768501, -71.371063, '/programmation/chasse-aux-bestioles-aux-floralies-jouvence/', 'Chasse aux bestioles aux Floralies Jouvence', ''); mgmap1.addMarker(46.733200, -71.443588, '/programmation/chasse-aux-bestioles-dans-le-parc-des-hauts-fonds/', 'Chasse aux bestioles dans le Parc des Hauts-Fonds', ''); mgmap1.addMarker(46.813988, -71.206612, '/programmation/a-vos-marques-prets-fouillez/', 'A vos marques... Prêts... Fouillez !', ''); mgmap1.addMarker(47.652554, -70.149353, '/programmation/decouverte-de-la-biodiversite-de-charlevoix/', 'Découverte de la Biodiversité de Charlevoix', ''); mgmap1.addMarker(46.792343, -71.264801, '/programmation/conference-demonstration-matiere-a-reflexion/', 'Conférence-démonstration MATIÈRE à réflexion', ''); mgmap1.addMarker(46.750938, -71.343697, '/programmation/festival-electrons-livres/', 'Festival Électrons Livres', ''); mgmap1.addMarker(47.064148, -70.796379, '/programmation/le-vent-dans-les-ailes/', 'Le vent dans les ailes', ''); mgmap1.addMarker(46.815228, -71.202332, '/programmation/erreur-watson-la-chimie-au-service-de-la-justice/', 'Erreur Watson : la chimie au service de la justice', ''); mgmap1.addMarker(47.064148, -70.796379, '/programmation/sur-la-piste-de-renard/', 'Sur la piste de Renard', ''); mgmap1.addMarker(47.064148, -70.796379, '/programmation/les-tresors-du-cap-tourmente/', 'Les trésors du Cap-Tourmente', ''); mgmap1.addMarker(47.064148, -70.796379, '/programmation/defi-grozoiseaux/', 'Défi Grozoiseaux', ''); mgmap1.addMarker(46.786736, -71.282288, '/programmation/les-abeilles-sentinelles-ecologiques/', 'Les abeilles, sentinelles écologiques', ''); mgmap1.addMarker(46.792343, -71.264801, '/programmation/construis-ton-spectroscope-et-decouvre-la-matiere/', 'Construis ton spectroscope et découvre la matière !', ''); mgmap1.addMarker(46.741184, -71.354439, '/programmation/mini-expo-astro-section-jeunesse-du-club-vega/', 'Mini expo astro section jeunesse du club véga', ''); mgmap1.addMarker(46.751629, -71.288765, '/programmation/du-changement-pour-une-terre-qui-nous-rend-fiers/', 'Du changement pour une Terre qui nous rend fiers !', ''); mgmap1.addMarker(46.792343, -71.264801, '/programmation/fabrique-ton-petit-chocolat-scientifique/', 'Fabrique ton petit chocolat scientifique', ''); mgmap1.addMarker(46.814323, -71.225792, '/programmation/livres-de-sciences-dans-les-bibliotheques-de-quebec/', 'Livres de sciences dans les bibliothèques de Québec', ''); mgmap1.addMarker(46.810051, -71.215881, '/programmation/les-mineraux-du-musee-canadien-de-la-nature-a-quebec/', 'Les minéraux du Musée canadien de la nature à Québec', ''); mgmap1.addMarker(46.770130, -71.294235, '/programmation/des-medicaments-en-trop/', 'Des médicaments en trop', ''); mgmap1.addMarker(46.342670, -72.542931, '/programmation/expo-biblio-la-terre-de-demain/', 'Expo biblio - La Terre de demain', ''); mgmap1.addMarker(46.358582, -72.567787, '/programmation/salon-des-sciences-de-la-mauricie/', 'Salon des sciences de la Mauricie', ''); mgmap1.addMarker(46.564102, -72.752571, '/programmation/symposium-des-sciences/', 'Symposium des sciences', ''); mgmap1.addMarker(45.402416, -71.828232, '/programmation/rassemblement-scientifique-de-lestrie-1/', 'Rassemblement scientifique de l&#039;Estrie', ''); mgmap1.addMarker(45.494408, -72.309959, '/programmation/repair-cafe/', 'Repair Café', ''); mgmap1.addMarker(45.380409, -71.928436, '/programmation/cercle-mathematique-de-sherbrooke/', 'Cercle Mathématique de Sherbrooke', ''); mgmap1.addMarker(45.403366, -71.895638, '/programmation/la-preuve-par-limage/', 'La preuve par l’image', ''); mgmap1.addMarker(45.403366, -71.895638, '/programmation/la-preuve-par-limage-1/', 'La preuve par l’image', ''); mgmap1.addMarker(45.397408, -71.896782, '/programmation/soiree-dastronomie-place-de-la-gare-de-sherbrooke/', 'Soirée d&#039;astronomie Place de la Gare de Sherbrooke', ''); mgmap1.addMarker(45.403366, -71.895638, '/programmation/delires-scientifiques-vis-ta-science-autrement-1/', 'Délires scientifiques! Vis ta science autrement.', ''); mgmap1.addMarker(45.394413, -71.928307, '/programmation/atelier-sur-les-mollusques-aquatiques-et-terrestres/', 'Atelier sur les mollusques aquatiques et terrestres', ''); mgmap1.addMarker(45.667953, -73.494850, '/programmation/le-soleil-et-les-changement-climatiques/', 'Le soleil et les changement climatiques', ''); mgmap1.addMarker(45.667953, -73.494850, '/programmation/fabrique-ta-propre-enseigne-neon/', 'Fabrique ta propre enseigne néon', ''); mgmap1.addMarker(45.483768, -73.808022, '/programmation/presentoirs-de-livres-24h-de-science/', 'Présentoirs 24h de science', ''); mgmap1.addMarker(45.517937, -73.608383, '/programmation/activite-stim-avec-des-briques-lego/', 'Activité STIM avec des briques LEGO', ''); mgmap1.addMarker(45.479172, -73.563400, '/programmation/exposition-de-documents-sur-le-theme-de-la-science/', 'Exposition de documents sur le thème de la science', ''); mgmap1.addMarker(45.449303, -73.816498, '/programmation/presentoirs-bibliographies-sur-le-theme-sous-la-terre/', 'Présentoirs/Bibliographies sur le thème &quot;Sous la terre&quot;', ''); mgmap1.addMarker(45.479172, -73.563400, '/programmation/les-circuits-electroniques/', 'Les circuits électroniques', ''); mgmap1.addMarker(45.448582, -73.577957, '/programmation/la-science-abracadabrante-avec-les-scientifines/', 'La science abracadabrante avec les scientifines', ''); mgmap1.addMarker(45.457073, -73.547440, '/programmation/la-science-abracadabrante-avec-les-scientifines-1/', 'La science abracadabrante avec les scientifines', ''); mgmap1.addMarker(45.524872, -73.582474, '/programmation/programmez-une-creature-par-ordinateur/', 'Programmez une créature par ordinateur', ''); mgmap1.addMarker(45.502773, -73.554718, '/programmation/sauvons-leau/', 'Sauvons l&#039;eau !', ''); mgmap1.addMarker(45.557461, -73.672546, '/programmation/partez-en-mission-pour-le-monarque/', 'Partez en mission pour le monarque!', ''); mgmap1.addMarker(45.557461, -73.672546, '/programmation/lindustrie-miniere-ici-la-et-un-peu-partout/', 'L’industrie minière : ici, là et un peu partout!', ''); mgmap1.addMarker(45.509209, -73.568535, '/programmation/les-mathematiques-de-la-magie/', 'Les mathématiques de la magie!', ''); mgmap1.addMarker(45.553364, -73.662636, '/programmation/science-abracadabrante-2/', 'Science abracadabrante', ''); mgmap1.addMarker(45.514069, -73.646317, '/programmation/une-breve-histoire-du-temps/', 'Une brève histoire du temps', ''); mgmap1.addMarker(45.557461, -73.672546, '/programmation/vie-aquatique-des-bouleversements-a-lhorizon/', 'Vie aquatique : des bouleversements à l’horizon?', ''); mgmap1.addMarker(45.505211, -73.550240, '/programmation/forum-sur-le-cancer-du-sein/', 'Forum sur le cancer du sein', ''); mgmap1.addMarker(45.562149, -73.595634, '/programmation/fabrication-de-jouets-ecologiques/', 'Fabrication de jouets écologiques', ''); mgmap1.addMarker(45.441399, -73.758514, '/programmation/journee-internationale-de-lastronomie-24h-de-science/', 'Journée Internationale de l&#039;Astronomie + 24h de science', ''); mgmap1.addMarker(45.505211, -73.550240, '/programmation/les-araignees-de-la-peur-a-la-fascination/', 'Les araignées – De la peur à la fascination', ''); mgmap1.addMarker(45.681114, -73.500977, '/programmation/marais-sans-dessus-dessous/', 'Marais sans dessus dessous', ''); mgmap1.addMarker(45.514450, -73.895958, '/programmation/les-oiseaux-de-retour-chez-eux/', 'Les oiseaux, de retour chez eux', ''); mgmap1.addMarker(45.499691, -73.768173, '/programmation/du-champ-a-la-foret/', 'Du champ à la forêt', ''); mgmap1.addMarker(45.557461, -73.672546, '/programmation/laboratoire-judiciaire/', 'Laboratoire Judiciaire', ''); mgmap1.addMarker(45.501011, -73.615776, '/programmation/la-terre-de-demain-les-maths-peuvent-elles-aider/', 'La Terre de demain : les maths peuvent-elles aider?', ''); mgmap1.addMarker(45.504959, -73.574036, '/programmation/decouvrir-la-chimie-discover-chemistry/', 'Découvrir la chimie! / Discover Chemistry', ''); mgmap1.addMarker(45.557461, -73.672546, '/programmation/sadapter-piece-par-piece/', 'S’adapter pièce par pièce', ''); mgmap1.addMarker(45.557461, -73.672546, '/programmation/visite-guidee-du-pavillon-daccueil-du-parcours-gouin/', 'Visite guidée du pavillon d&#039;accueil du Parcours Gouin', ''); mgmap1.addMarker(45.424202, -73.866859, '/programmation/cinema-en-famille-du-vendredi-big-hero-6/', 'Cinéma en famille du vendredi: Big Hero 6', ''); mgmap1.addMarker(45.581715, -73.544067, '/programmation/deuxieme-vie/', 'Deuxième vie', ''); mgmap1.addMarker(45.440098, -73.691795, '/programmation/apres-midi-technologique/', 'Après-midi technologique', ''); mgmap1.addMarker(45.424202, -73.866859, '/programmation/brico-scientifique-pour-maman/', 'Brico scientifique pour maman!', ''); mgmap1.addMarker(45.445770, -73.651527, '/programmation/activite-scientifique-la-glace-carbonique/', 'Activité scientifique : la glace carbonique!', ''); mgmap1.addMarker(45.547428, -73.598038, '/programmation/decouvertes-litteraires-autour-de-la-science-bricolage/', 'Découvertes littéraires autour de la science', ''); mgmap1.addMarker(45.557617, -73.556946, '/programmation/capturez-des-donnees-pour-lherbier-marie-victorin/', 'Capturez des données pour l&#039;herbier Marie-Victorin', ''); mgmap1.addMarker(45.504467, -73.577385, '/programmation/les-arbres-une-chronique-vivante-de-notre-climat/', 'Les Arbres: Une Chronique Vivante de notre Climat', ''); mgmap1.addMarker(45.595375, -73.523880, '/programmation/deuxieme-vie-1/', 'Deuxième vie !', ''); mgmap1.addMarker(45.557461, -73.672546, '/programmation/quiz-sur-la-biodiversite-urbaine/', 'Quiz sur la biodiversité urbaine', ''); mgmap1.addMarker(45.509354, -73.566826, '/programmation/visite-acoustique-de-la-maison-symphonique-complet/', 'Visite acoustique de la Maison symphonique - COMPLET', ''); mgmap1.addMarker(45.509434, -73.569481, '/programmation/la-vie-serait-elle-dorigine-intraterrestre/', 'La vie serait-elle d&#039;origine intraterrestre ?', ''); mgmap1.addMarker(45.552509, -73.576202, '/programmation/portes-ouvertes-sur-les-sciences-de-la-terre/', 'Portes ouvertes sur les sciences de la terre', ''); mgmap1.addMarker(45.477280, -73.592667, '/programmation/visites-guidees-du-musee-des-ondes-emile-berliner/', 'Visites guidées du Musée des ondes Emile Berliner', ''); mgmap1.addMarker(45.578171, -73.657722, '/programmation/conference-et-observation-astronomique/', 'Conférence et Observation astronomique', ''); mgmap1.addMarker(45.587234, -73.575577, '/programmation/rassemblement-scientifique-de-montreal-2019/', 'Rassemblement scientifique de Montréal 2019', ''); mgmap1.addMarker(45.427792, -75.710930, '/programmation/protegeons-lenvironnement-mais-comment/', 'Protégeons l&#039;environnement... Mais comment ?', ''); mgmap1.addMarker(45.421844, -75.738441, '/programmation/la-realite-virtuelle-au-secours-des-phobies/', 'La réalité virtuelle au secours des phobies', ''); mgmap1.addMarker(45.459194, -75.769730, '/programmation/demonstration-grand-public-dune-cyberattaque/', 'Démonstration grand public d’une cyberattaque', ''); mgmap1.addMarker(45.507301, -75.791344, '/programmation/excursion-mycologique-printaniere/', 'Excursion mycologique printanière', ''); mgmap1.addMarker(45.459835, -75.767059, '/programmation/ma-these-en-180-secondes/', 'Ma Thèse en 180 secondes', ''); mgmap1.addMarker(45.506279, -75.812080, '/programmation/balade-promenons-nous-dans-les-bois/', 'Balade - Promenons-nous dans les bois!', ''); mgmap1.addMarker(45.790928, -75.207451, '/programmation/conference-participative-declic-reinventer-la-foret/', 'Conférence participative Déclic - Réinventer la forêt', ''); mgmap1.addMarker(45.429043, -75.709213, '/programmation/1e-plateforme-wikimedia-autochtone-en-amerique-du-nord/', '1e plateforme Wikimédia autochtone en Amérique du Nord', ''); mgmap1.addMarker(45.421844, -75.738441, '/programmation/les-embouteillages-une-veritable-plaie/', 'Les embouteillages, une véritable plaie !', ''); mgmap1.addMarker(48.571243, -78.109261, '/programmation/rallye-scientifique-avec-les-debrouillards/', 'Rallye scientifique avec les Débrouillards', ''); mgmap1.addMarker(48.141258, -78.120872, '/programmation/rassemblement-scientifique-de-labitibi-temiscamingue/', 'Rassemblement scientifique de l&#039;Abitibi-Témiscamingue', ''); mgmap1.addMarker(48.230759, -79.007927, '/programmation/lastronomie-dhier-daujourdhui-et-de-demain/', 'L&#039;astronomie d&#039;hier, d&#039;aujourd&#039;hui et de demain', ''); mgmap1.addMarker(50.212269, -66.378090, '/programmation/table-de-livres-inventions-et-inventeurs/', 'Table de livres : Inventions et inventeurs!', ''); mgmap1.addMarker(50.212269, -66.378090, '/programmation/club-de-jeux-de-societe-inventions-et-inventeurs/', 'Club de jeux de société : Inventions et inventeurs !', ''); mgmap1.addMarker(50.218819, -66.381821, '/programmation/samedi-debrouillard/', 'Samedi Débrouillard', ''); mgmap1.addMarker(49.913937, -74.366531, '/programmation/observation-du-soleil/', 'Observation du Soleil', ''); mgmap1.addMarker(49.913937, -74.366531, '/programmation/decouvrez-le-planetarium-quasar/', 'Découvrez le planétarium Quasar', ''); mgmap1.addMarker(49.913937, -74.366531, '/programmation/observation-des-crateres-lunaires/', 'Observation des cratères lunaires', ''); mgmap1.addMarker(49.913937, -74.366531, '/programmation/exposition-soleil/', 'Exposition Soleil', ''); mgmap1.addMarker(47.372330, -61.916153, '/programmation/presentation-des-projets-de-recherche-des-finissants/', 'Présentation des projets de recherche des finissants', ''); mgmap1.addMarker(48.042034, -65.465553, '/programmation/festi-oiseaux/', 'Festi-oiseaux', ''); mgmap1.addMarker(46.654709, -71.312904, '/programmation/programme-ton-robot-abeille/', 'Butine ta programmation', ''); mgmap1.addMarker(45.566998, -73.744308, '/programmation/50e-anniversaire-du-premier-pas-sur-la-lune/', '50e anniversaire du premier pas sur la Lune', ''); mgmap1.addMarker(45.603191, -73.659592, '/programmation/soiree-dobservation-du-ciel/', 'Soirée d&#039;observation du ciel', ''); mgmap1.addMarker(45.616543, -73.786652, '/programmation/chasse-aux-bebittes-aquatiques/', 'Chasse aux bébittes aquatiques', ''); mgmap1.addMarker(45.607986, -73.796394, '/programmation/creatures-de-la-nuit-les-chauves-souris/', 'Créatures de la nuit : les chauves-souris', ''); mgmap1.addMarker(45.607986, -73.796394, '/programmation/les-especes-meconnues-et-mal-aimees/', 'Les espèces méconnues et mal-aimées', ''); mgmap1.addMarker(45.540962, -73.718147, '/programmation/bien-differents-genetiquement-dun-continent-a-lautre/', 'Bien différents génétiquement d’un continent à l’autre?', ''); mgmap1.addMarker(45.548340, -73.729912, '/programmation/decouverte-au-bois-chomedey/', 'Découverte au bois Chomedey', ''); mgmap1.addMarker(45.593838, -73.664345, '/programmation/les-roboticiens-de-demain/', 'Les roboticiens de demain', ''); mgmap1.addMarker(45.825657, -73.423653, '/programmation/heure-du-conte-scientifique-avec-gertrud/', 'Heure du conte scientifique avec Gertrüd', ''); mgmap1.addMarker(45.825657, -73.423653, '/programmation/atelier-robotique-pedagogique/', 'Atelier robotique pédagogique', ''); mgmap1.addMarker(45.887955, -73.284454, '/programmation/les-fossiles/', 'Les fossiles', ''); mgmap1.addMarker(45.745262, -73.602577, '/programmation/jeu-dadresse-electrique/', 'Jeu d’adresse électrique', ''); mgmap1.addMarker(46.019421, -73.447014, '/programmation/2050-quand-nous-serons-9-8-milliards-sur-terre/', '2050 : quand nous serons 9,8 milliards sur Terre', ''); mgmap1.addMarker(45.741043, -73.451935, '/programmation/contes-scientifiques/', 'Contes scientifiques', ''); mgmap1.addMarker(45.884178, -73.275085, '/programmation/soiree-dobservation-de-la-lune/', 'Soirée d&#039;observation de la lune', ''); mgmap1.addMarker(45.945377, -73.572586, '/programmation/atelier-jeux-dadresse-electrique/', 'Atelier jeux d’adresse électrique', ''); mgmap1.addMarker(46.118229, -74.600571, '/programmation/storytime-with-tina-special-science/', 'Storytime with Tina, spécial Science !', ''); mgmap1.addMarker(46.118229, -74.600571, '/programmation/livres-de-sciences-a-la-bibliotheque-samuel-ouimet/', 'Livres de sciences à la Bibliothèque Samuel-Ouimet', ''); mgmap1.addMarker(46.193897, -74.630730, '/programmation/livres-de-sciences-a-la-bibliotheque-du-couvent/', 'Livres de sciences à la Bibliothèque du Couvent', ''); mgmap1.addMarker(45.678699, -73.923706, '/programmation/les-merveilles-de-la-nature-en-realite-virtuelle/', 'Les merveilles de la nature en réalité virtuelle', ''); mgmap1.addMarker(45.623287, -74.074249, '/programmation/si-le-ciel-metait-raconte-mythologie-et-astronomie/', 'Si le ciel m&#039;était raconté : mythologie et astronomie', ''); mgmap1.addMarker(45.491627, -73.487740, '/programmation/les-decouvertes-de-melvil-electricite-statique/', 'Les découvertes de Melvil : Électricité statique', ''); mgmap1.addMarker(45.587238, -73.326057, '/programmation/science-abracadabrante/', 'Science abracadabrante', ''); mgmap1.addMarker(45.503334, -73.510292, '/programmation/les-reactions-chimiques/', 'Les réactions chimiques', ''); mgmap1.addMarker(45.503334, -73.510292, '/programmation/exposition-de-livres-thematiques/', 'Exposition de livres thématiques', ''); mgmap1.addMarker(45.775040, -73.359169, '/programmation/mini-spectacle-animaux-magie-et-sciences/', 'Mini-spectacle Animaux, magie et sciences', ''); mgmap1.addMarker(45.415398, -73.498466, '/programmation/brixologie-carnaval/', 'Brixologie : carnaval', ''); mgmap1.addMarker(45.398502, -73.572647, '/programmation/la-vie-sous-leau/', 'La vie sous l&#039;eau', ''); mgmap1.addMarker(45.388672, -73.517868, '/programmation/autour-de-labeille/', 'Autour de l&#039;abeille', ''); mgmap1.addMarker(45.398502, -73.572647, '/programmation/suggestions-du-moment-pour-le-24-heures-de-science/', 'Suggestions du moment - 24 heures de science', ''); mgmap1.addMarker(45.491089, -73.402702, '/programmation/livres-de-sciences-dans-les-bibliotheques-de-longueuil/', 'Livres de sciences dans les bibliothèques de Longueuil', ''); mgmap1.addMarker(45.620934, -72.920532, '/programmation/ca-grouille-dans-le-boise/', 'Ça grouille dans le boisé', ''); mgmap1.addMarker(45.620934, -72.920532, '/programmation/le-retour-des-insectivores-ailes/', 'Le retour des insectivores ailés', ''); mgmap1.addMarker(45.565681, -73.190346, '/programmation/le-monde-de-demain/', 'Le monde de demain', ''); mgmap1.addMarker(45.536758, -73.157784, '/programmation/la-science-a-la-montagne2/', 'La science à la montagne', ''); mgmap1.addMarker(45.361080, -73.479858, '/programmation/roches-et-mineraux/', 'Roches et minéraux', ''); mgmap1.addMarker(45.503254, -73.383682, '/programmation/les-merveilles-de-la-nature-en-realite-virtuelle-1/', 'Les merveilles de la nature en réalité virtuelle', ''); mgmap1.addMarker(45.604462, -73.448830, '/programmation/cap-sur-la-nature/', 'Cap sur la nature', ''); mgmap1.addMarker(45.549053, -73.189178, '/programmation/circuit-exterieur-les-plantes-et-leurs-usages/', 'Circuit extérieur – Les plantes et leurs usages', ''); mgmap1.addMarker(45.549053, -73.189178, '/programmation/conference-horticole/', 'Conférence horticole', ''); mgmap1.addMarker(45.359375, -73.300606, '/programmation/air-et-atmosphere-avec-les-neurones-atomiques/', 'Air et atmosphère avec les Neurones atomiques', ''); mgmap1.addMarker(46.058456, -71.957657, '/programmation/codage-souque-a-la-corde/', 'Codage : Souque à la corde', ''); mgmap1.addMarker(45.881287, -72.484634, '/programmation/la-conquete-de-la-lune/', 'La conquête de la lune', ''); mgmap1.addMarker(45.881287, -72.484634, '/programmation/lumiere-et-laser/', 'Lumière et laser', ''); mgmap1.addMarker(46.327763, -72.503265, '/programmation/la-terre-de-demain/', 'La Terre de demain', ''); mgmap1.addMarker(46.506069, -72.203606, '/programmation/exposition-de-livres-de-jeux-et-de-dvd/', 'Exposition de livres, de jeux et de DVD', ''); mgmap1.addMarker(45.943672, -71.988548, '/programmation/jobserve-les-racines-de-mes-haricots-grimpants/', 'J&#039;observe les racines de mes haricots grimpants !', ''); mgmap1.fitToMarkers(); 





Share this post

Link to post
Share on other sites

Are there any plans to officially make this compatible with 3.x? At the moment there's quite a few issues. When editing the field itself, it constantly says error geocoding address. In a page containing the field in the CMS it says the same on save, and it also says "REQUEST DENIED" under the map on load. To actually place a pin requires searching and then focusing off the box, pressing return will save the page but not update the marker.

  • Like 1

Share this post

Link to post
Share on other sites

Based on the available methods in this module, it seems like the best approach is actually now:

$map = $modules->get('MarkupGoogleMap');
echo $map->getGMapScript();

You can see here: https://github.com/ryancramerdesign/FieldtypeMapMarker/blob/917edef8efe92bf8bdbdff62b66f6eca581ca57e/MarkupGoogleMap.module#L154-L165 that this will return the entore script tag you need, along with your API included.

Of course it would be nice if the module docs mentioned this 🙂

Share this post

Link to post
Share on other sites


Our problem is that we're making the map marker template from another template via page reference. We've tried to add our own checkbox "show map" but it has proven quite difficult to follow the geotag ON/OFF logic.

I would love to see if someone has figured this out.


is there anyway for checking if the map is enabled, or do I have to make my own checkbox logic for it


Share this post

Link to post
Share on other sites

Hi after upgrading to ProcessWire 3.0.140 and trying to edit the field "mapmarker" from admin i got:

Fatal Error: Uncaught Error: Call to a member function prepend() on null in /var/www/www.designupgrade-test.com/wire/core/Fields.php:1066
Stack trace:
#0 /var/www/www.designupgrade-test.com/wire/modules/Process/ProcessField/ProcessField.module(1412): ProcessWire\Fields->getCompatibleFieldtypes(Object(ProcessWire\Field))
#1 /var/www/www.designupgrade-test.com/wire/core/Wire.php(380): ProcessWire\ProcessField->___buildEditFormBasics()
#2 /var/www/www.designupgrade-test.com/wire/core/WireHooks.php(813): ProcessWire\Wire->_callMethod('___buildEditFor...', Array)
#3 /var/www/www.designupgrade-test.com/wire/core/Wire.php(442): ProcessWire\WireHooks->runHooks(Object(ProcessWire\ProcessField), 'buildEditFormBa...', Array)
#4 /var/www/www.designupgrade-test.com/wire/modules/Process/ProcessField/ProcessField.module(1020): ProcessWire\Wire->__call('buildEditFormBa...', Array)
#5 /var/www/www.designupgrade-test.com/wire/core/Wire.php(380): ProcessWire\ProcessField->___buildEditForm()
#6 /var/www/www.designupgrade-test.com/wire/core/WireHooks.php(813): ProcessWire\Wire->_ca (line 1066 of /var/www/www.designupgrade.com/wire/core/Fields.php)

I also noticed that Compatibility is till 2.7 any chanche to upgrade to 3.0 ?
Does anybody solved in some way that issue?

Share this post

Link to post
Share on other sites
On 10/17/2018 at 12:10 PM, rst said:

The way I was able to solve it, is you have to create 2 different api's. One for the front end, where you set restrictions to your domain name. And then another for this module where you set the restriction to your server's ip address. Also, make sure that geocoding api is enabled in google console.  Hope this helps.



Thank you. I was just starting to lose it. One particular client insists on using Google Map instead of Open Street Map and I was getting nowhere. Geocoding wasn't working in the backend and the map wasn't showing on the front although there were no errors. Then I saw this post ^ and enabled the geocoding API in the Google Console.

This is important information for anyone having trouble.

Share this post

Link to post
Share on other sites

After upgrade to Processwire 2.8 there is an issue with map markers. It is not compatible and not working correctly like
1) The sub location map is not displaying on admin on chrome it appears on double click but in Morzilla it works fine.
2) The sub location pointer gets reset to the default location even after saving.

Share this post

Link to post
Share on other sites

Why "upgrading" today to 2.8?? The current stable Version is 3.0.148, and 2.8 is years old and a dead end branch. It is not further maintained. Please use 3.0.148

  • Like 1

Share this post

Link to post
Share on other sites
20 hours ago, horst said:

Why "upgrading" today to 2.8?? The current stable Version is 3.0.148, and 2.8 is years old and a dead end branch. It is not further maintained. Please use 3.0.148

The site I'm working on was already upgraded to 2.8. Is the Map maker only compatible for the processwire 3.0.148?

Share this post

Link to post
Share on other sites

I've got the maps working on the front end and back end... got a single map with all points, and individual location maps on their pages. API set, account hooked up, everything seems to be awesome. 

I just want to output the street address in addition to the map, so I popped in:

echo $page->marker->address;    // outputs the address you entered

But when I do I am getting the full address PLUS lat./long and a little [n/a]->address - and want the FORMATTED ADDRESS:

621 W Manchester Blvd, Inglewood, CA 90301 (33.961857, -118.367332, 12) [N/A]->addres

^ that's the formatted_address from Google maps... from the previous 25 pages of historic notes it seems that  there's no easy way to extract this. Any $page->map->address, lat, lon - all returns the same feed, no doubt due to Google changes.

Options currently seem:

- long reverse engineering of the address and JSON parsing, 
- adding a second field and asking the data entry people to enter data twice...
- using another script like Ryan's and coding via the API...

Happy to have gotten this working  aside from this for the sake of getting it to work, and the map with all markers is lovely...but considering Google's charging for clicks? The Google Maps Text Formatter may be the easiest way to accomplish this for sites with light mapping needs. 




Edited by hollyvalero

Share this post

Link to post
Share on other sites

I'm new to processwire, I'm using ryan's MapMarker module and I've added the api key as well  in module config but still maps are not visible. It is still giving 

Oops! Something went wrong.
This page didn't load Google Maps correctly. See the JavaScript console for technical details.

and in console Google Maps JavaScript API error: RefererNotAllowedMapError.
Please help. Is there anything i'm doing wrong?

Share this post

Link to post
Share on other sites

This error indicates that you have not added your site's domain to the allowed referers for your Google Maps API key. See the error documentation here: https://developers.google.com/maps/documentation/javascript/error-messages#deverrorcodes

This didn't use to be required, but Google Maps is constantly becoming more strict with their API usage limits. Go to the cloud console and make sure to add your site's domain to the allowed referers for the key you're using, then it should start working again.

  • Like 1

Share this post

Link to post
Share on other sites
2 hours ago, Mamun Paul said:

I'm new to processwire, I'm using ryan's MapMarker module

@Mamun Paul,

Welcome to the forums and ProcessWire.

Please don't double post. You asked the same question here and @adrian provided a response.


  • Like 2

Share this post

Link to post
Share on other sites
On 5/27/2020 at 4:37 PM, kongondo said:

@Mamun Paul,

Welcome to the forums and ProcessWire.

Please don't double post. You asked the same question here and @adrian provided a response.


Yes,  i did this because I was not getting the response early, so I thought to post again.
Sorry for that!!

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By horst
      Wire Mail SMTP

      An extension to the (new) WireMail base class that uses SMTP-transport

      This module integrates EmailMessage, SMTP and SASL php-libraries from Manuel Lemos into ProcessWire. I use this continously evolved libraries for about 10 years now and there was never a reason or occasion not to do so. I use it nearly every day in my office for automated composing and sending personalized messages with attachments, requests for Disposition Notifications, etc. Also I have used it for sending personalized Bulkmails many times.

      The WireMailSmtp module extends the new email-related WireMail base class introduced in ProcessWire 2.4.1 (while this writing, the dev-branch only).
      Here are Ryans announcement.

      Current Version 0.6.0
      Changelog: https://github.com/horst-n/WireMailSmtp/blob/master/CHANGELOG.md
      get it from the Modules Directory Install and Configure

      Download the module into your site/modules/ directory and install it.

      In the config page you fill in settings for the SMTP server and optionaly the (default) sender, like email address, name and signature.
      You can test the smtp settings directly there. If it says "SUCCESS! SMTP settings appear to work correctly." you are ready to start using it in templates, modules or bootstrap scripts.

      Usage Examples
      The simplest way to use it:
      $numSent = wireMail($to, $from, $subject, $textBody); $numSent = wireMail($to, '', $subject, $textBody); // or with a default sender emailaddress on config page This will send a plain text message to each recipient.
      You may also use the object oriented style:
      $mail = wireMail(); // calling an empty wireMail() returns a wireMail object $mail->to($toEmail, $toName); $mail->from = $yourEmailaddress; // if you don't have set a default sender in config // or if you want to override that $mail->subject($subject); $mail->body($textBody); $numSent = $mail->send(); Or chained, like everywhere in ProcessWire:
      $mail = wireMail(); $numSent = $mail->to($toEmail)->subject($subject)->body($textBody)->send(); Additionaly to the basics there are more options available with WireMailSmtp. The main difference compared to the WireMail BaseClass is the sendSingle option. With it you can set only one To-Recipient but additional CC-Recipients.
      $mail = wireMail(); $mail->sendSingle(true)->to($toEmail, $toName)->cc(array('person1@example.com', 'person2@example.com', 'person3@example.com')); $numSent = $mail->subject($subject)->body($textBody)->send(); The same as function call with options array:
      $options = array( 'sendSingle' => true, 'cc' => array('person1@example.com', 'person2@example.com', 'person3@example.com') ); $numSent = wireMail($to, '', $subject, $textBody, $options); There are methods to your disposal to check if you have the right WireMail-Class and if the SMTP-settings are working:
      $mail = wireMail(); if($mail->className != 'WireMailSmtp') { // Uups, wrong WireMail-Class: do something to inform the user and quit echo "<p>Couldn't get the right WireMail-Module (WireMailSmtp). found: {$mail->className}</p>"; return; } if(!$mail->testConnection()) { // Connection not working: echo "<p>Couldn't connect to the SMTP server. Please check the {$mail->className} modules config settings!</p>"; return; }  
      You can add some debug code into a template file and call a page with it:
      $to = array('me@example.com'); $subject = 'Wiremail-SMTP Test ' . date('H:i:s') . ' äöü ÄÖÜ ß'; $mail = wireMail(); if($mail->className != 'WireMailSmtp') { echo "<p>Couldn't get the right WireMail-Module (WireMailSmtp). found: {$mail->className}</p>"; } else { $mail->from = '--INSERT YOUR SENDER ADDRESS HERE --'; // <--- !!!! $mail->to($to); $mail->subject($subject); $mail->sendSingle(true); $mail->body("Titel\n\ntext text TEXT text text\n"); $mail->bodyHTML("<h1>Titel</h1><p>text text <strong>TEXT</strong> text text</p>"); $dump = $mail->debugSend(1); } So, in short, instead of using $mail->send(), use $mail->debugSend(1) to get output on a frontend testpage.
      The output is PRE formatted and contains the areas: SETTINGS, RESULT, ERRORS and a complete debuglog of the server connection, like this one:
      Following are a ...

      List of all options and features

      testConnection () - returns true on success, false on failures

      sendSingle ( true | false ) - default is false

      sendBulk ( true | false ) - default is false, Set this to true if you have lots of recipients (50+)

      to ($recipients) - one emailaddress or array with multiple emailaddresses

      cc ($recipients) - only available with mode sendSingle, one emailaddress or array with multiple emailaddresses

      bcc ($recipients) - one emailaddress or array with multiple emailaddresses

      from = 'person@example.com' - emailaddress, can be set in module config (called Sender Emailaddress) but it can be overwritten here

      fromName = 'Name Surname' - optional, can be set in module config (called Sender Name) but it can be overwritten here

      priority (3) - 1 = Highest | 2 = High | 3 = Normal | 4 = Low | 5 = Lowest

      dispositionNotification () or notification () - request a Disposition Notification

      subject ($subject) - subject of the message

      body ($textBody) - use this one alone to create and send plainText emailmessages

      bodyHTML ($htmlBody) - use this to create a Multipart Alternative Emailmessage (containing a HTML-Part and a Plaintext-Part as fallback)

      addSignature ( true | false ) - the default-behave is selectable in config screen, this can be overridden here
      (only available if a signature is defined in the config screen)

      attachment ($filename, $alternativeBasename = "") - add attachment file, optionally alternative basename

      send () - send the message(s) and return number of successful sent messages

      debugSend(1) - returns and / or outputs a (pre formatted) dump that contains the areas: SETTINGS, RESULT, ERRORS and a complete debuglog of the server connection. (See above the example code under ADVANCED DEBUG METHOD for further instructions!)

      getResult () - returns a dump (array) with all recipients (to, cc, bcc) and settings you have selected with the message, the message subject and body, and lists of successfull addresses and failed addresses,

      logActivity ($logmessage) - you may log success if you want

      logError ($logmessage) - you may log warnings, too. - Errors are logged automaticaly
      useSentLog (true | false) - intended for usage with e.g. third party newsletter modules - tells the send() method to make usage of the sentLog-methods - the following three sentLog methods are hookable, e.g. if you don't want log into files you may provide your own storage, or add additional functionality here

      sentLogReset ()  - starts a new LogSession - Best usage would be interactively once when setting up a new Newsletter

      sentLogGet ()  - is called automaticly within the send() method - returns an array containing all previously used emailaddresses

      sentLogAdd ($emailaddress)  - is called automaticly within the send() method
      Changelog: https://github.com/horst-n/WireMailSmtp/blob/master/CHANGELOG.md
    • By Cybermano
      Food Allergens Module
      A simple List of Food Allergens
      My needs were to provide a simple list of food allergens for our clients with restaurant related activity.
      The idea was to simply output the list (to speed up the data entry) without leaving the food menu editing, eg. opening another page in new tab or window.
      This isn't a perfect solution, but it works fine for my needs and I decided to share the base idea.
      This could also be easily used to show little notes or short "vademecum", not only for the list of food allergens.
      Main features
      The basis
      All moves from a short editing of the module in this tutorial: How to create custom admin pages by @bernhard
      First of all it creates an empty admin page, with a dedicated permission to let safe-user to see it (this permission has to be created as a new ones, manually or by the module).
      Once the page is created, I have hooked its behaviour into the ready.php, to show the content (basically a list).
      A step further
      With the tips of  @bernhard, @Soma (and many others), see here , the magic happens. 
      The new page will be shown as a panel, so editors will not abandon their data entry to have a quick view to the list.
      A little further
      Why scroll to the top of the page to click a link?
      The next step was to create a sticky button only in the food menu pages.
      Again with a @bernhard tip I moved into the customization of this simple module and the related hook.
      How to use this module
      After installed, it creates the page /admin/page/allergens/ and the module is to be setted up. The first field is a CKEditor with multi-language. This is the place where to write the informations that will be shown into the page. The next field is a simply text-area where to place a bit of JS that will be appended to the markup of the text (omit the 'script' tags). I also putted a checkbox with a silly statement: this to think at least twice on the safety of the written JS. Now comes the first way to display the link to the page
      Field Note with Link. Enable and save it. The module will display a new row with 4 selects (1 standard and 3 ASM):
      View mode (to show the page as Panel or as Modal PopUp); Templates to select: select one or more and save before proceed, so the  asm-select of the pages will be populated showing all the pages of the selected templates. Pages to select: also here select at least one and save before proceed to populate the asm-select for fields only with the ones that belong to the selected pages. Select the fields where to place the note and save again. That's all: now you will find into the notes of the selected fields the link "See the List of Allergens".
      At the same way, the option for the sticky button, but with a plus
      The field select is obviously unnecessary, but you could play with the last row: the inline styles to fix your sticky button where you like. Here you could set the sticky position of the <div> and the absolute ones of the <a>.

      Video Explanation
      In these screencasts you could see a custom JS that show a "copy" button near a "hanna-code" call.
      This because I've set a specific one for each allergen to show up a tooltip in the front end.

      Registrazione #33.mp4  

      Registrazione #34.mp4 ---
      Last but not the least
      Actually it works fine for my needs, even if it's much improvable: I'm working on the permissions creation, the uninstall section, a separate configs and defaults and how to include the hook into the module leaving free the ready.php. According to a simpler uninstall. Also I would make the link text as a dynamic text field, so it will be more flexible.
      I always learn a lot here, so I would share my code for whom it could be interested.
      I removed the hanna code references, but I provide you the html list of the allergens, English and Italian too, so you can paste them into the "source" of the CKEditor field to have a ready to use module.
      Obviously you are free to modify the code as per your needs.
      Please, keep in mind that I'm not a pro coder and I beg your pardon for my verbosity (speaking and coding). 😉
      I hope be helpful or for inspiration.
    • By Robin S
      This module is sort of an upgrade to my earlier ImageToMarkdown module, and might be useful to anyone working with Markdown in ProcessWire.
      Copy Markdown
      Adds icons to images and files that allow you to copy a Markdown string to the clipboard. When you click the icon a message at the top left of the screen notifies you that the copying has occurred.

      Note: in the screencast an EasyMDE inputfield is used to preview the Markdown. It's not required to use EasyMDE - an ordinary textarea field could be used.
      Usage: Images
      When you hover on an item in an Images field an asterisk icon appears on the thumbnail. Click the icon to copy an image Markdown string to clipboard. If the "Description" field is populated it is used as the alt text.
      You can also open the "Variations" modal for an image and click the asterisk icon to copy an image Markdown string for an individual variation.
      Usage: Files
      When you hover on an item in a Files field an asterisk icon appears next to the filename. Click the icon to copy a link Markdown string to the clipboard. If the "Description" field is populated it is used as the link text, otherwise the filename is used.
    • By BitPoet
      I've realized that I've been jumping back and forth between the PW API docs and the source code for site modules far too much. The idea to hold all necessary documentation locally in one place has occurred to me before, but getting PHPDocumentor et al set up and running reliably (and producing readable output) as always been too much of a hassle. Today I was asked how I find the right hooks and their arguments, and that inspired me to finally get my backside down on the chair and whip something up, namely the
      Module Api Doc Viewer
      It lets you browse the inline documentation and public (optionally also protected) class/method/property information for all modules, core classes and template files in the ProcessWire instance. The documentation is generated on the fly, so you don't have to remember to update your docs whenever you update a module.
      The module is quite fresh, so expect some bugs there. Behind the scenes it uses PHP-Parser together with a custom class that extracts the information I needed, and the core TextformatterMarkdownExtra module for rendering the description part in the phpdoc style comments.
      This is not a replacement / competitor to the API Viewer included in the commercial ProDevTools package. There is quite some information included in the inline documentation that my module can't (and won't) parse, but which makes up parts of the official ProcessWire API docs.
      This, instead, is a kind of Swiss army knife to view PHPDoc style information and get a quick class or function reference.
      If you feel daring and want to give it a spin, or if you just want to read a bit more, visit the module's GitHub repository.
      This is the overview page under "Setup" -> "Module API Docs":

      And this is what the documentation for an individual class looks like:

      The core module documentation can of course be found online, but it didn't make sense not to include them.
      Let me know what you think!

    • By tcnet
      File Manager for ProcessWire is a module to manager files and folders from the CMS backend. It supports creating, deleting, renaming, packing, unpacking, uploading, downloading and editing of files and folders. The integrated code editor ACE supports highlighting of all common programming languages.

      This module is probably the most powerful module. You might destroy your processwire installation if you don't exactly know what you doing. Be careful and use it at your own risk!
      ACE code editor
      This module uses ACE code editor available from: https://github.com/ajaxorg/ace

      This module uses the JavaScript dragscroll available from: http://github.com/asvd/dragscroll. Dragscroll adds the ability to drag the table horizontally with the mouse pointer.
      PHP File Manager
      This module uses a modified version of PHP File Manager available from: https://github.com/alexantr/filemanager
  • Create New...