Jump to content
ryan

Map Marker Map

Recommended Posts

On 2017-06-19 at 1:35 AM, Jozsef said:

The same issue. Running PW 3.0.61 and Map Marker 2.0.6 worked just fine. After upgrading to 2.0.9 and entering my API key I get the above error to any address I try.

 

On 2017-06-01 at 11:45 PM, Arcturus said:

I'm having an issue in PW 3.0.62 where the module will only geocode an address when I manually click the checkmark between address and lat/lng off/on when editing the page within the admin. Based on what I've read here, it seems only the client-side geocoder is working?

Additional details:

  • I have both Google Maps and Google Places APIs working without issue on the front-end and have added my Maps key to the module's configuration
  • My MapMarker-based field, "map", has a MapMarker: Error geocoding address notification and I can't find any elaboration
  • Neither API has any issues with my address formatting/default address, with an example being 5 Bloor Street, Toronto, ON M4W 3T3
  • My addresses are mapping properly when I play with the checkbox (status goes from UNKNOWN to OK)
  • I can't trigger the geocoding via the API

Any ideas?

 

 

Hi @Arcturus and @Jozsef,

 

Did you find a solution for this issue? I am running  3.0.84 and am having the same problem.

//Jasper

Share this post


Link to post
Share on other sites
On 9/24/2017 at 9:30 PM, PWaddict said:

To always display the map at the center even if the browser resized or the full screen button pressed just use the below function:


google.maps.event.addDomListener(window, 'resize', function() {
		var center = map.getCenter()
		google.maps.event.trigger(map, "resize")
		map.setCenter(center)
	});

 

The above function that I posted few months ago it's working perfect for Chrome, Firefox & Opera.

On IE11 it's partial working. If the map's full screen button pressed the map is no more centered. On the browser resize is working properly. Anyone knows how to fix this?

Share this post


Link to post
Share on other sites

I am really stuck here, the map was working fine a few weeks ago but now the address will not geocode automatically, this is a problem as I could have multiple users adding addresses through the api. I have tried adding $p->trackChange('map'); and similar but everytime I have to go in and click on the address field and then click out of it and it works. Any suggestions?

While I am here, how do I get the map markers to not link to a page when someone clicks them.

Share this post


Link to post
Share on other sites

Hello, 

i have 2 different domains for one page. 
In one domain i can see the map markers in other it comes an error. 
 

Google Maps API error: MissingKeyMapError https://developers.google.com/maps/documentation/javascript/error-messages#missing-key-map-error

I have generated an standart Api key 
dont understand why it doesnt works 

the same key also works for me on localhost skyscrapers profile too 

 

Share this post


Link to post
Share on other sites

The Geocode is returning some results in local script - ie,  Japanese is like -  和歌山県.  Is there a way to have it return English?  I know if I search the same place in Google Maps it returns the English equivalent.  I tried adding language=en to the URL in MapMarker.Php but that didn't work.

 

Thanks,

Heather

Share this post


Link to post
Share on other sites
On 14/12/2017 at 2:14 PM, formmailer said:

 

Hi @Arcturus and @Jozsef,

 

Did you find a solution for this issue? I am running  3.0.84 and am having the same problem.

//Jasper

The only solution I've found is to downgrade the MapMarker module to 2.0.6, I believe. That's the last working version for me.

Share this post


Link to post
Share on other sites

Hi,

I'm trying to display the title of a page on the map but I can get it.

Ideally I want to display both $page->lieu->title and page->map_lieu->adress.

I couldn't find the way to write it. The only one working is 'lieu' but it display only id page. Can I use a variable in the array?

        'markerTitleField' => 'lieu',   // $page->lieu->title  ??

Thanks

Mel

Share this post


Link to post
Share on other sites

Not sure if anyone is interested, but I just extended this to support address component fields. Now you can enter the various address components individually and it will automatically populate the final combined address field and geocode the address to lat/long.

image.thumb.png.622315b1d549731b233fe3be3e8a1995.png

I wanted this so I could grab the individual components for displaying a business address in a specific format, rather than relying on what the site editor entered into the combined address field.

You can of course call the components like this:

$page->address->street
$page->address->additional
$page->address->city
$page->address->state
$page->address->postcode
$page->address->country

These are in addition to the existing:

$page->address->address // the combined version
$page->address->lat
$page->address->lng
$page->address->zoom

Is anyone interested in this version? Not sure if @ryan would accept a PR or not?

 

  • Like 6

Share this post


Link to post
Share on other sites
1 hour ago, adrian said:

Not sure if anyone is interested, but I just extended this to support address component fields. Now you can enter the various address components individually and it will automatically populate the final combined address field and geocode the address to lat/long.

image.thumb.png.622315b1d549731b233fe3be3e8a1995.png

I wanted this so I could grab the individual components for displaying a business address in a specific format, rather than relying on what the site editor entered into the combined address field.

You can of course call the components like this:


$page->address->street
$page->address->additional
$page->address->city
$page->address->state
$page->address->postcode
$page->address->country

These are in addition to the existing:


$page->address->address // the combined version
$page->address->lat
$page->address->lng
$page->address->zoom

Is anyone interested in this version? Not sure if @ryan would accept a PR or not?

 

I would use it

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, adrian said:

Not sure if anyone is interested, but I just extended this to support address component fields. Now you can enter the various address components individually and it will automatically populate the final combined address field and geocode the address to lat/long.

image.thumb.png.622315b1d549731b233fe3be3e8a1995.png

I wanted this so I could grab the individual components for displaying a business address in a specific format, rather than relying on what the site editor entered into the combined address field.

You can of course call the components like this:


$page->address->street
$page->address->additional
$page->address->city
$page->address->state
$page->address->postcode
$page->address->country

These are in addition to the existing:


$page->address->address // the combined version
$page->address->lat
$page->address->lng
$page->address->zoom

Is anyone interested in this version? Not sure if @ryan would accept a PR or not?

 

Too late for me since I did that in my /ready.php. But would certainly use it in another project! ;-)

Share this post


Link to post
Share on other sites
1 hour ago, mel47 said:

Too late for me since I did that in my /ready.php.

I am curious how you handled it in ready.php - did you create the additional component inputs, or was it extracting the components from the single combined address field? I have done something similar before, but the problem is that you can't guarantee how site editors will enter the address that way.

Share this post


Link to post
Share on other sites
On 9/24/2017 at 9:30 PM, PWaddict said:

To always display the map at the center even if the browser resized or the full screen button pressed just use the below function:


google.maps.event.addDomListener(window, 'resize', function() {
		var center = map.getCenter()
		google.maps.event.trigger(map, "resize")
		map.setCenter(center)
	});

 

The Google Maps API have just been updated and the "center" is now working on all browsers:

  • When the map is resized, the map center is fixed
    • The full-screen control now preserves center.
    • There is no longer any need to trigger the resize event manually.

Share this post


Link to post
Share on other sites
22 hours ago, adrian said:

I am curious how you handled it in ready.php - did you create the additional component inputs, or was it extracting the components from the single combined address field? I have done something similar before, but the problem is that you can't guarantee how site editors will enter the address that way.

Nothing special. Just a concatenate from values like this:

$page->map_lieu->address = "{$page->no_civique} {$page->rue}, {$page->ville}, {$page->codepostal} {$page->pays}";

Data were entered from FormBuilder, with fields similar to yours. I'm now at ~150 adresses collected and I just have a couple which didn't geolocalize (generally a typo).  Status varied to "rooftop to geometric center". My only concerns is if you get a "Zero results" status, on front-end, the square map appears but with nothing. I'm planning to display the map with a "if status>=1", just to be sure.

Share this post


Link to post
Share on other sites

Interesting discussion about extra address fields.

I created a fieldtype 'AddressGeoNames' that consists of separate text inputs for country, city, postcode, lat, lng etc. where field values are verified and partially auto populated through geonames.org API.

This is a standalone Inputfield that geocodes through the google maps api.

But it can also be connected to an InputfieldLeafletMapMarker field so that the given address will be rendered as pin on the map. The pin can also be manually repositioned and writes back lat/lng to the AddressGeonames field.

I am currently using this in one live project with about 1500 users and they seem to get along fine with data input and geocoding.

This is how it looks like when used next to a InputfieldLeafletMapMarker field:
addressgeonames.thumb.png.7811ec93b18df1d5952ce7d9b93044a3.png

Planning on adding support for GoogleMapsMarker, too and eventually releasing it on github. Not quite ready yet, though. But if anyone is interested in the concept, I could share what I have so far.

 

  • Like 4

Share this post


Link to post
Share on other sites

Really nice work on the Map InputFields folks!

I need to do something similar next week for a travel company. They want to plot a route on a map and I have been wondering about the best way to go about this.

My thoughts so far would be to tie a repeater control to a map, let the user use the marker to plot the route, then add the coordinates into a repeater control. 

This approach using jQuery opens up all kinds of issues in terms of managing the UX design for removing steps in the route, adding individual steps into the repeater, synchronizing the plotted route with the repeater control entries from the marker etc....

Wondered if any one else has run into similar UX request and found a better way around it.

 

 

Share this post


Link to post
Share on other sites

Hi guys, 

Do you have the map marker module working in version 2.8 or version 3? In processwire admin, I can see the map, but then when I go to the page where the map should be showing, I'm getting an error: " MarkupGoogleMap Error: Please add the maps.google.com script in your document head. The map is not showing on the page. " 

I have fresh processwire installation

it seems that the module injects the google maps script before html tag, it seems to be causing the problem... I'm not sure how to solve this

 

<script type='text/javascript' src='/site/modules/FieldtypeMapMarker/MarkupGoogleMap.js'></script><div id='mgmap1' class='MarkupGoogleMap' style='width: 100%; height: 300px;'></div><script type='text/javascript'>if(typeof google === 'undefined' || typeof google.maps === 'undefined') { alert('MarkupGoogleMap Error: Please add the maps.google.com script in your document head.'); } else { var mgmap1 = new MarkupGoogleMap(); mgmap1.setOption('zoom', 12); mgmap1.setOption('mapTypeId', google.maps.MapTypeId.HYBRID); mgmap1.init('mgmap1', 40.712776, -74.005974); mgmap1.addMarker(40.712776, -74.005974, '/en/about/', 'About', ''); }</script><!DOCTYPE html>
<html lang="en">
<head>

when I paste the code inside <head> manually, then I can see the map on the page where it should be visible. 

 

Any suggestions?

Share this post


Link to post
Share on other sites
On 14.2.2018 at 3:13 AM, adrian said:

Not sure if anyone is interested, but I just extended this to support address component fields. Now you can enter the various address components individually and it will automatically populate the final combined address field and geocode the address to lat/long.

image.thumb.png.622315b1d549731b233fe3be3e8a1995.png

I wanted this so I could grab the individual components for displaying a business address in a specific format, rather than relying on what the site editor entered into the combined address field.

You can of course call the components like this:


$page->address->street
$page->address->additional
$page->address->city
$page->address->state
$page->address->postcode
$page->address->country

These are in addition to the existing:


$page->address->address // the combined version
$page->address->lat
$page->address->lng
$page->address->zoom

Is anyone interested in this version? Not sure if @ryan would accept a PR or not?

 

I want tha ;)

Share this post


Link to post
Share on other sites
On 2/18/2018 at 4:37 AM, adrian said:

Thanks for this fork - a very useful enhancement. If you think you might submit a pull request I saw a few things that could be good to include.

1. The default address setting in the field config doesn't work in this fork. Maybe it needs separate fields for street, city, etc?

2. Perhaps you could integrate this fix for ajax-loaded inputfields: https://github.com/ryancramerdesign/FieldtypeMapMarker/issues/19

3. Because the inputfield places the text inputs inside paragraph tags, there is an excessive amount of vertical space between rows of inputs (in the default admin theme at least - I didn't check the others). Solutions could be to change from <p> to <div> wrappers, or to add a rule to InputfieldMapMarker.css to reduce the margin on paragraphs.

Edit...

4. Would it be possible to avoid the trailing commas in the Address field if some of the components aren't filled out?

2018-03-05_123037.png.9ddcc6e6abe44532e781abc4522f8eb0.png

  • Like 1

Share this post


Link to post
Share on other sites

Hi @Robin S - glad you're finding the fork useful.

1. I can't see a difference in behavior from the main repo - it looks to me like the lat/lng get populated when creating a new page, but not the address field. I think this actually makes sense to me because I think it's really just designed to give the site editor a local starting view, rather than an exact address. Am I missing something?

2. Happy to incorporate the AJAX fix - thanks.

3. I honestly don't mind the spacing. It is applied differently in default and UiKit themes which makes it a bit of a pain. Probably changing the <p> to <div> as you suggested might make this a little cleaner. Perhaps you'd consider a PR to my repo so you can get it looking how you'd like it - better to have someone tweak this who has a definite opinion on it :) 

4. I am looking at this now - agreed that this should be fixed, but I noticed a bit of a dilemma - currently I trigger the geocode request like this:

            if($street.val() && $city.val() && $state.val() && $postcode.val() && $country.val()) {
                $addrComponent.blur(function() {
                    geoCodeAddr();
                });
            }

In other words, don't trigger it until all subfields are complete (except the additional_address which isn't added to the address which gets geocoded anyway). So if you're in a situation where not all subfields are filled out, it won't geocode. I don't really want to have a manual geocode button - would rather it was automatic - what do you think?

 

As for submitting a PR back to the main repo - I don't think there is really much point - I have a 4 year old PR there already which has been ignored :) Not that I want to have multiple forks of modules floating around either, but not sure what other option there is.

  • Like 1

Share this post


Link to post
Share on other sites

Thanks @adrian, I'll have a think about those things.

I realise now that I have made a lot of changes myself to FieldtypeMapMarker for different projects - every time I use it I find something that doesn't really suit me or work too well. Maybe I should go through all of that and consolidate it into my own fork. Then we could possibly look at where it makes sense to combine our forks together.

  • Like 2

Share this post


Link to post
Share on other sites
Just now, Robin S said:

Then we could possibly look at where it makes sense to combine our forks together.

Yeah, I think that would be great - I think we need one feature-rich version going forward that has all these improvements. I don't expect Ryan will accept a PR, but I do remember sometime ago he suggested I could take over this module if I wanted - personally I don't really want to because I already have too many to support, but perhaps if we both had commit rights on the main repo we could share the load?

  • Like 2

Share this post


Link to post
Share on other sites

@ryan

it would be great if there was an option to save the map (using static maps api?) to an image file locally and that local image would update should the map field values change. This would mean not needing to use an API key since the traffic would be to your hosted image and not making requests to google maps api each visit. So to the cms user they are seeing gmaps as usual but the cms saves a static version of their work to an image that is used on the output side.

Also it would be neat to have a checkbox that enabled to  use JS/CSS to provide artificial zoom/map moving function using the static map image assuming it was at a decent resolution/dimensions and perhaps marker placement as well. Otherwise if the checkbox is un-selected, it will show a map image of defined dimensions with no zoom or bells & whistles, etc.

Share this post


Link to post
Share on other sites

Hi

I have frequently error : "initMap is not a function"

But the map is generally displaying correctly. Sometimes I have to refresh the page to get it.

I have this in <head>:      <script async defer src="https://maps.googleapis.com/maps/api/js?key=MYKEY&callback=initMap"  type="text/javascript"></script>

 

Chrome inspector:
js?key=AIzaSyAXQ3WeU…callback=initMap:96 Uncaught 
Kb {message: "initMap is not a function", name: "InvalidValueError", stack: "Error↵    at new Kb (https://maps.googleapis.com/m…QnQ_ThTMb8XNFMZaOHo23Ya04&callback=initMap:146:49"}
message:"initMap is not a function"
name:"InvalidValueError"
stack:
"Error↵    at new Kb (https://maps.googleapis.com/maps/api/js?key=MYKEY&callback=initMap:42:72)↵    at Object._.Lb (https://maps.googleapis.com/maps/api/js?key=MYKEY&callback=initMap:42:182)↵    at ih (https://maps.googleapis.com/maps/api/js?key=MYKEY&callback=initMap:96:104)↵    at https://maps.googleapis.com/maps/api/js?key=MYKEY&callback=initMap:146:34↵    at Object.google.maps.Load (https://maps.googleapis.com/maps/api/js?key=MYKEY4&callback=initMap:21:5)↵    at https://maps.googleapis.com/maps/api/js?key=MYKEY&callback=initMap:145:20↵    at https://maps.googleapis.com/maps/api/js?key=MYKEY&callback=initMap:146:49"
__proto__
:Error

Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mike Rockett
      Jumplinks for ProcessWire
      Release: 1.5.56
      Composer: rockett/jumplinks
      Jumplinks is an enhanced version of the original ProcessRedirects by Antti Peisa.
      The Process module manages your permanent and temporary redirects (we'll call these "jumplinks" from now on, unless in reference to redirects from another module), useful for when you're migrating over to ProcessWire from another system/platform. Each jumplink supports wildcards, shortening the time needed to create them.
      Unlike similar modules for other platforms, wildcards in Jumplinks are much easier to work with, as Regular Expressions are not fully exposed. Instead, parameters wrapped in curly braces are used - these are described in the documentation.
      Under Development: 2.0, to be powered by FastRoute
      As of version 1.5.0, Jumplinks requires at least ProcessWire 2.6.1 to run.
      View on GitLab
      Download via the Modules Directory
      Read the docs
      Features
      The most prominent features include:
      Basic jumplinks (from one fixed route to another) Parameter-based wildcards with "Smart" equivalents Mapping Collections (for converting ID-based routes to their named-equivalents without the need to create multiple jumplinks) Destination Selectors (for finding and redirecting to pages containing legacy location information) Timed Activation (activate and/or deactivate jumplinks at specific times) 404-Monitor (for creating jumplinks based on 404 hits) Additionally, the following features may come in handy:
      Stale jumplink management Legacy domain support for slow migrations An importer (from CSV or ProcessRedirects) Feedback & Feature Requests
      I’d love to know what you think of this module. Please provide some feedback on the module as a whole, or even regarding smaller things that make it whole. Also, please feel free to submit feature requests and their use-cases.
      Note: Features requested so far have been added to the to-do list, and will be added to 2.0, and not the current dev/master branches.
      Open Source

      Jumplinks is an open-source project, and is free to use. In fact, Jumplinks will always be open-source, and will always remain free to use. Forever. If you would like to support the development of Jumplinks, please consider making a small donation via PayPal.
      Enjoy! :)
    • By BitPoet
      As threatened in Ryan's announcement for 3.0.139, I built a little module for sliding toggles as a replacement for checkboxes. Styling of the input is CSS3 only (with all the usual caveats about older browsers), no JS necessary, and may still be a bit "rough around the edges", so to speak, since I didn't have much time for testing on different devices or brushing things up enough so I'd feel comfortable pushing it to the module directory. But here's the link to the GitHub repo for now:
      InputfieldSlideToggle
      Fieldtype and Inputfield that implements smartphone-style toggles as replacement for checkbox inputs. The visualization is CSS-only, no additional JS necessary.
      Status
      Still very alpha, use with caution!
      Features / Field Settings
      Size
      You can render the toggles in four different sizes: small, medium, large and extra large.
      Off Color
      Currently, "unchecked" toggles can be displayed either in grey (default) or red.
      On Color
      "Checked" toggles can be rendered in one of these colors: blue (default), black, green, grey, orange or red.
      Screenshots

      Some examples with checkbox label


      View all Size and Color Combinations
      Small toggles Medium toggles Big toggles Extra big toggles  









    • By Orkun
      Hi Guys
      I needed to add extended functionalities for the InputfieldDatetime Module (module is from processwire version 2.7.3) because of a Request of Customer.
      So I duplicated the module and placed it under /site/modules/.
      I have added 3 new Settings to the InputfieldDatetime Module.
      1. Day Restriction - Restrict different days based on weekdays selection (e.g. saturday, sunday) - WORKING

       
      2. Time Slots - Define Time slots based on custom Integer Value (max is 60 for 1 hour) - WORKING

       
      3. Time Range Rules per Weekday - Define a minTime and MaxTime per Weekday (e.g. Opening Hours of a Restaurant) - NOT WORKING PROPERLY

       
      The Problem
      Time Slots and Day Restriction working fine so far. But the Time Range Rules per Weekday doesn't work right.
      What should happen is, that when you click on a date, it should update the minTime and maxTime of the Time Select.
      But the change on the select only happens if you select a date 2 times or when you select a date 1 time and then close the datepicker and reopen it again.
      The time select doesn't get change when you select a date 1 time and don't close the picker.
      Here is the whole extended InputfieldDatetime Module.
      The Files that I have changed:
      InputfieldDatetime.module InputfieldDatetime.js jquery-ui-timepicker-addon.js (https://trentrichardson.com/examples/timepicker/) - updated it to the newest version, because minTime and maxTime Option was only available in the new version  
      Thats the Part of the JS that is not working correctly:
      if(datetimerules && datetimerules.length){ options.onSelect = function(date, inst) { var day = $(this).datetimepicker("getDate").getDay(); day = day.toString(); var mintime = $(this).attr('data-weekday'+day+'-mintime'); var maxtime = $(this).attr('data-weekday'+day+'-maxtime'); console.log("weekday: "+day); console.log("minTime: "+mintime); console.log("maxTime: "+maxtime); var optionsAll = $(this).datetimepicker( "option", "all" ); optionsAll.minTime = mintime; optionsAll.maxTime = maxtime; $(this).datetimepicker('destroy'); $(this).datetimepicker(optionsAll); $(this).datetimepicker('refresh'); //$.datepicker._selectDate($(this).attr("id"),date); //$.datepicker._base_getDateDatepicker(); // var inst = $.datepicker._getInst($(this)); // $.datepicker._updateDatepicker(inst); /*$(this).datetimepicker('destroy'); InputfieldDatetimeDatepicker($(this), mintime, maxtime); $(this).datetimepicker('refresh'); */ // $(this).datetimepicker('option', {minTime: mintime, maxTime: maxtime}); } } Can you have a look and find out what the Problem is?
      InputfieldDatetime.zip
       
      Kind Regards
      Orkun
    • By teppo
      This module tracks changes, additions, removals etc. of public (as in "not under admin") pages of your site. Like it's name says, it doesn't attempt to be a version control system or anything like that - just a log of what's happened.
      At the moment it's still a work in progress and will most likely be a victim of many ruthless this-won't-work-let's-try-that-instead cycles, but I believe I've nailed basic functionality well enough to post it here.. so, once again, I'll be happy to hear any comments you folks can provide
      https://modules.processwire.com/modules/process-changelog/
      https://github.com/teppokoivula/ProcessChangelog
      How does it work?
      Exactly like it's (sort of) predecessor, Process Changelog actually consists of two modules: Process Changelog and Process Changelog Hooks. Hooks module exists only to serve main module by hooking into various functions within Pages class, collecting data of performed operations, refining it and keeping up a log of events in it's own custom database table (process_changelog.) Visible part is managed by Process Changelog, which provides users a (relatively) pretty view of the contents of said log table.
      How do you use it?
      When installed this module adds new page called Changelog under Admin > Setup which provides you with a table view of collected data and basic filtering tools See attached screenshots to get a general idea about what that page should look like after a while.
      For detailed installation instructions etc. see README.md.
       


    • By Gadgetto
      Status update links (inside this thread) for SnipWire development will be always posted here:
      2019-08-08
      2019-06-15
      2019-06-02
      2019-05-25
      If you are interested, you can test the current state of development:
      https://github.com/gadgetto/SnipWire
      Please note that the software is not yet intended for use in a production system (alpha version).
      If you like, you can also submit feature requests and suggestions for improvement. I also accept pull requests.
      ---- INITIAL POST FROM 2019-05-25 ----
      I wanted to let you know that I am currently working on a new ProcessWire module that fully integrates the Snipcart Shopping Cart System into ProcessWire. (this is a customer project, so I had to postpone the development of my other module GroupMailer).
      The new module SnipWire offers full integration of the Snipcart Shopping Cart System into ProcessWire.
      Here are some highlights:
      simple setup with (optional) pre-installed templates, product fields, sample products (quasi a complete shop system to get started immediately) store dashboard with all data from the snipcart system (no change to the snipcart dashboard itself required) Integrated REST API for controlling and querying snipcart data webhooks to trigger events from Snipcart (new order, new customer, etc.) multi currency support self-defined/configurable tax rates etc. Development is already well advanced and I plan to release the module in the next 2-3 months.
      I'm not sure yet if this will be a "Pro" module or if it will be made available for free.
      I would be grateful for suggestions and hints!
      (please have a look at the screenshots to get an idea what I'm talking about)
       




×
×
  • Create New...