Jump to content

Recommended Posts

5 hours ago, Mike Rockett said:

@Joss Hi - that's a legacy error from an earlier version of MySQL. What version are you running?

This is on a shared server and according to phpmyadmin, it is  5.1.73

Share this post


Link to post
Share on other sites

@Mike Rockett - Apparently, that error will also show on 5.5, which is what the server is running, the company have told me. I will probably migrate at some point.

Share this post


Link to post
Share on other sites
50 minutes ago, Joss said:

@Mike Rockett - Apparently, that error will also show on 5.5, which is what the server is running, the company have told me. I will probably migrate at some point.

I'd be inclined to switch to a newer version. Even 5.6.5, which is when they changed it, is considerably old now. Due to its age, I don't plan on supporting it.

In the interim, you could always try removing DEFAULT CURRENT_TIMESTAMP from the schema file (schema-create-mc.sql) before installation as the insert statement does force it. Untested, but it should work in theory.

Share this post


Link to post
Share on other sites

When I installed this module on my pw site, I got following two erros

 Module reported error during install (ProcessJumplinks): SQLSTATE[HY000]: General error: 1293 Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause

Failed to init module: ProcessJumplinks - SQLSTATE[42S02]: Base table or view not found: 1146 Table 'lara_db.process_jumplinks' doesn't exist

pw 2.8.35
php 5.5.9
mysql 5.5.55

 

Share this post


Link to post
Share on other sites
On 7/12/2017 at 2:54 AM, adrianmak said:

When I installed this module on my pw site, I got following two erros

 Module reported error during install (ProcessJumplinks): SQLSTATE[HY000]: General error: 1293 Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause

Failed to init module: ProcessJumplinks - SQLSTATE[42S02]: Base table or view not found: 1146 Table 'lara_db.process_jumplinks' doesn't exist

pw 2.8.35
php 5.5.9
mysql 5.5.55

 

Hi there - you will need to upgrade your version of MySQL. Version 5.5 is no longer supported, since end-2015. I recommend you use MySQL 5.7, or switch to MariaDB.

Share this post


Link to post
Share on other sites

Hi Mike

I have a multi-lingual MODX site which I've rebuilt in Processwire.

PW site isn't live but is on a test server.

As the MODX version currently has around 500 resources (lets say 500 URIs) I am keen to follow the old alleged Abraham Lincoln advice

Quote

Give me six hours to chop down a tree and I will spend the first four sharpening the axe.

I'm thinking of doing following and wanted to sanity check my approach

1. Get a sitemap of the entire MODX site into a XLS or CSV and import into Jumplinks

2. Manually go through each "old" URL and update to the new URL

Am I missing something crucial apart from keeping an eye on Google's Search Console (was Webmaster tools) and watching for 404 hits. I'll enable 404 monitoring on Jumplinks too.

Cheers for any pre flight advice. 

 

 

  • Like 1

Share this post


Link to post
Share on other sites
6 minutes ago, Peter Knight said:

Hi Mike

I have a multi-lingual MODX site which I've rebuilt in Processwire.

PW site isn't live but is on a test server.

As the MODX version currently has around 500 resources (lets say 500 URIs) I am keen to follow the old alleged Abraham Lincoln advice

I'm thinking of doing following and wanted to sanity check my approach

1. Get a sitemap of the entire MODX site into a XLS or CSV and import into Jumplinks

2. Manually go through each "old" URL and update to the new URL

Am I missing something crucial apart from keeping an eye on Google's Search Console (was Webmaster tools) and watching for 404 hits. I'll enable 404 monitoring on Jumplinks too.

Cheers for any pre flight advice. 

Hi Peter

  1. Can any of these resources/uris be combined into a pattern? If there are 500 resources, I'm sure the tree can be simplified somewhat, albeit aside technicalities such as the difference in how the two platforms create URIs (or if they've been manually set in modx).
  2. If you do a sitemap, how will you generate new uris to map to PW Pages?

At the end of the day, as long as things match up, I don't see any further issues. Not sure on how Modx works (I tried it once, didn't like it), but keep an eye out for trailing slashes as well.

In your specific instance, the 404 monitor is limited to 100 - you'd need to change the code to get it to show more, and that might be client-resource-intensive. JL2 will handle this better.

  • Like 1

Share this post


Link to post
Share on other sites
18 hours ago, Mike Rockett said:

Hi Peter

  1. Can any of these resources/uris be combined into a pattern? If there are 500 resources, I'm sure the tree can be simplified somewhat, albeit aside technicalities such as the difference in how the two platforms create URIs (or if they've been manually set in modx).
  2. If you do a sitemap, how will you generate new uris to map to PW Pages?

At the end of the day, as long as things match up, I don't see any further issues. Not sure on how Modx works (I tried it once, didn't like it), but keep an eye out for trailing slashes as well.

In your specific instance, the 404 monitor is limited to 100 - you'd need to change the code to get it to show more, and that might be client-resource-intensive. JL2 will handle this better.

Hi Mike

I think I'll prioritise the 100 or so most important URLs and then I can work through the others gradually. Client confirmed that actually they don't rank terrible well anyway so it looks like a relatively fresh start and the pressure is off.

Just have to upgrade to MySQL 5.6 as it's currently running 5.1.X


 

  • Like 1

Share this post


Link to post
Share on other sites

Hello Mike,

I'm trying to run Jumplinks on a server running MySQL 5.7.16, and I keep getting this error from ProcessWire:

Failed to init module: ProcessJumplinks - SQLSTATE[42S21]: Column already exists: 1060 Duplicate column name 'last_hit'

This is Jumplinks version 1.5.48. We used the same version of the module on another site on the same server within the last few months, and it's working fine there - so I can't understand why this isn't working. It allows me to add redirects, but they don't redirect when loaded. I was also unable to edit the module configuration from the Manage Jumplinks page - the url changed to root/module/edit?name=ProcessJumplinks, and then gave the error "Unrecognized Path". 

 

If you have any insight you could offer, I'd be most appreciative! Thanks.

Share this post


Link to post
Share on other sites

Hi @melody - thanks for the post. This has popped up before, and still not sure as to why. When it happened, I asked Zeka to delete the last_hit column and refresh the modules. It turns out that he had to delete the process_jumplinks_nf table as well, and it started to work properly. Why that is the case, I still do not know... 

You can follow the brief thread from here to see what happened: 

Let me know if those steps work for you. You might land up having to add the nf table manually and increasing the schema version in the module's configuration via phpMyAdmin or whatever tool you use to manually edit DBs.

 

  • Like 1

Share this post


Link to post
Share on other sites

Hi @Mike Rockett -- @melody and I took a look at this this morning. It looks like this is an issue with 0000-00-00 00:00:00 null dates in our strict MySQL environment. After replacing the NULL_DATE constant at the top of the module file with 'CURRENT_TIMESTAMP' and replacing the 0000-00-00 00:00:00 dates in Blueprints/schema-update-v2.sql and Blueprints/schema-update-v3.sql with the same, the problem went away after re-installing the module.

Hope that helps.

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, thetuningspoon said:

Hi @Mike Rockett -- @melody and I took a look at this this morning. It looks like this is an issue with 0000-00-00 00:00:00 null dates in our strict MySQL environment. After replacing the NULL_DATE constant at the top of the module file with 'CURRENT_TIMESTAMP' and replacing the 0000-00-00 00:00:00 dates in Blueprints/schema-update-v2.sql and Blueprints/schema-update-v3.sql with the same, the problem went away after re-installing the module.

Hope that helps.

Thanks for letting me know. This date story has me in a tizz because I'm not seeing the correct way to use [auto-updating] timestamps and still support all MySQL enviros... Unless I'm missing something here. Had the same issue with Laravel, and they had to introduce nullableTimestamps() into the schema system. I'm actually using Illuminate for Jumplinks 2, but not sure if it'll work in every environment...

Share this post


Link to post
Share on other sites

Hi Mike

I'm creating Jumplinks for a multilingual site and I was wondering what you advise when I come across a URL like following in the 404 monitor

/it/products/hooks/ganci-piatto/182728

That's an old URL from the italian tree of the site

The reason I'm asking is because when I browse to tree or auto-complete, I can pull up the 1827288 product page but it's not necessarily italian.

Should I manually Specify a destination in these cases and ensure we're manually pointing at the correct launguage?
 

Share this post


Link to post
Share on other sites
16 hours ago, Peter Knight said:

Hi Mike

I'm creating Jumplinks for a multilingual site and I was wondering what you advise when I come across a URL like following in the 404 monitor

/it/products/hooks/ganci-piatto/182728

That's an old URL from the italian tree of the site

The reason I'm asking is because when I browse to tree or auto-complete, I can pull up the 1827288 product page but it's not necessarily italian.

Should I manually Specify a destination in these cases and ensure we're manually pointing at the correct launguage?
 

Hi Peter,

From the top of my head, you could potentially use mapping collections to make it language aware; however, that means importing the entire dataset and using multiple languages - one collection for each language. How are your other URIs being handled?

Share this post


Link to post
Share on other sites
On 14/08/2017 at 7:07 AM, Mike Rockett said:

Hi Peter,

From the top of my head, you could potentially use mapping collections to make it language aware; however, that means importing the entire dataset and using multiple languages - one collection for each language. How are your other URIs being handled?

Hi Mike

each language is handled by a folder named after the language

domain.com/fr/ 
domain.com/de/ 
domain.com/it/ 
domain.com/es/ 

 

Share this post


Link to post
Share on other sites
9 hours ago, Peter Knight said:

Hi Mike

each language is handled by a folder named after the language

domain.com/fr/ 
domain.com/de/ 
domain.com/it/ 
domain.com/es/ 

 

You're probably going to need to do it manually. As Jumplinks 1 is not multi-lang-aware, there's no way for the destination field to know which language you need, unless you declare it manually, or by means of a mapping collection, one for each language. Destination selectors won't help as they are also not aware of languages.

So your collection could be called "italian", and would contain this:

100=/it/uri/to/page
101=/it/uri/to/other/page
102=/it/uri/to/product

And then define the language jumplink:

Source: it/{all}/{id}
Destination {id|italian}

This assumes that your ids are all different between content types (like product, etc.). You would also need to build your collections via a script, and that would require each destination page having a field with the old ID.

Share this post


Link to post
Share on other sites

Hi,

I've searched for a long time, but could not find an answer:

We relaunched a old website with a URL structure like that:

http://www.example.com/?main=notice	
http://www.example.com/?main=contact	
http://www.example.com/?main=film	
http://www.example.com/?main=references	
http://www.example.com/?main=products&sub=sunb

 Is it possible to redirect this old links via Jumplinks? I tiedy to define "?main=notice" as source but this don't work - I get the homepage with the original parameter attached ;-(.

Can you please give me a hint, many greets, Jens alias DV-JF

Share this post


Link to post
Share on other sites
3 hours ago, DV-JF said:

Hi,

I've searched for a long time, but could not find an answer:

We relaunched a old website with a URL structure like that:


http://www.example.com/?main=notice	
http://www.example.com/?main=contact	
http://www.example.com/?main=film	
http://www.example.com/?main=references	
http://www.example.com/?main=products&sub=sunb

 Is it possible to redirect this old links via Jumplinks? I tiedy to define "?main=notice" as source but this don't work - I get the homepage with the original parameter attached ;-(.

Can you please give me a hint, many greets, Jens alias DV-JF

Hi,

It is discussed somewhere in this thread. The problem is that a request like that is a request to the home page, and so the 404 event will not be triggered, and so Jumplinks cannot intervene and do the redirect.

You will need to use .htaccess to redirect all of those requests to something that Jumplinks can handle. Unfortunately, this will result in two redirects every time, but it's something you would need to work with in order to use Jumplinks.

In your .htaccess file, add the following on line 99 (just below AddDefaultCharset):

RewriteCond %{QUERY_STRING} ^main=(.+)$ [NC]
RewriteRule ^$ /rq [R=302]

When you request example.com/?main=something, it will be redirected to example.com/rq?main=something, and then you can create a jumplink for it.

  • Thanks 1

Share this post


Link to post
Share on other sites

I don't seem to get it to redirect at all. Or maybe I don't get it right? Is this module compatible with processwire 3.0 with multiple languages enabled?

My source (old url) is: 

Quote

de/foobar

My destination is a selected page that exists.

If I call https://mydomain.com/de/foobar I just get a 404 instead of the page I'm looking to redirect to.

Share this post


Link to post
Share on other sites
On 9/4/2017 at 11:40 AM, DarsVaeda said:

I don't seem to get it to redirect at all. Or maybe I don't get it right? Is this module compatible with processwire 3.0 with multiple languages enabled?

My source (old url) is: 

My destination is a selected page that exists.

If I call https://mydomain.com/de/foobar I just get a 404 instead of the page I'm looking to redirect to.

Jumplinks is compatible with v3 (though not thoroughly tested). As for multi-language, it is not specifically supported in terms of the additional features. However, a 404 event would still trigger the jumplinks routine. Please enable debug mode in Jumplinks' config and paste that log here. If it's very long, please add as an attachment.

Share this post


Link to post
Share on other sites

It's strange. I guess this has nothing to do with jumplinks.

https://mydomain.com/de/existing-page/non-existing -> 404 -> I get the jumplink debug page

https://mydomain.com/de/non-existing -> I just get the root page

 

@edit: aahhh I found it! URL Segements was turned on but not handled. So everything not existing was just redirected to frontpage.

  • Like 1

Share this post


Link to post
Share on other sites

I have a big problem. I installed Jumplinks and know my css, js and images don´t load anymore. I installed Processwire to a subdomain and now they redirect every request to the main domain. So no image can be found.

How can I solve it quickly? A uninstall didn´t work.

 

//Was a different problem and not related to the module.

Share this post


Link to post
Share on other sites
3 hours ago, jannisl said:

I have a big problem. I installed Jumplinks and know my css, js and images don´t load anymore. I installed Processwire to a subdomain and now they redirect every request to the main domain. So no image can be found.

How can I solve it quickly? A uninstall didn´t work.

Not sure how that’s possible, but it could be related to caching. If you provide more information about your setup and what jumplinks you have created, I might be able to assist.

1 hour ago, ceberlin said:

Hi Mike, is there a release plan for the v.2 version?

It’s on ice at the moment due to new work that’s come in. Time is super limited until earlyish next year, at which point I can revisit v2. Sorry for the delays, but it’s unavoidable at the moment.

  • Like 1

Share this post


Link to post
Share on other sites

Hey guys,

the jumplinks from "www.domain.com/index.php/something/" doesn´t get redirected to "www.domain.com/something/" and this is the reason why I can´t create Jumplinks for links with "index.php/" inside.

Did I understand something wrong?

Thanks,
jannisl

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Gadgetto
      Status update links (inside this thread) for SnipWire development will be always posted here:
      2019-08-08
      2019-06-15
      2019-06-02
      2019-05-25
      If you are interested, you can test the current state of development:
      https://github.com/gadgetto/SnipWire
      Please note that the software is not yet intended for use in a production system (alpha version).
      If you like, you can also submit feature requests and suggestions for improvement. I also accept pull requests.
      ---- INITIAL POST FROM 2019-05-25 ----
      I wanted to let you know that I am currently working on a new ProcessWire module that fully integrates the Snipcart Shopping Cart System into ProcessWire. (this is a customer project, so I had to postpone the development of my other module GroupMailer).
      The new module SnipWire offers full integration of the Snipcart Shopping Cart System into ProcessWire.
      Here are some highlights:
      simple setup with (optional) pre-installed templates, product fields, sample products (quasi a complete shop system to get started immediately) store dashboard with all data from the snipcart system (no change to the snipcart dashboard itself required) Integrated REST API for controlling and querying snipcart data webhooks to trigger events from Snipcart (new order, new customer, etc.) multi currency support self-defined/configurable tax rates etc. Development is already well advanced and I plan to release the module in the next 2-3 months.
      I'm not sure yet if this will be a "Pro" module or if it will be made available for free.
      I would be grateful for suggestions and hints!
      (please have a look at the screenshots to get an idea what I'm talking about)
       




    • By apeisa
      Update 31.7.2019: AdminBar is now maintained by @teppo. Modules directory entry has been updated, as well as the "grab the code" link below.
      ***
      Latest screencast: http://www.screencas...73-ab3ba1fea30c
      Grab the code: https://github.com/teppokoivula/AdminBar
      ***
      I put this Adminbar thingy (from here: http://processwire.c...topic,50.0.html) to modules section and to it's own topic.
      I recorded quick and messy screencast (really, my first screencast ever) to show what I have made so far. You can see it from here: http://www.screencas...18-1bc0d49841b4
      When the modal goes off, I click on the "dark side". I make it so fast on screencast, so it might seem a little bit confusing. Current way is, that you can edit, go back to see the site (without saving anything), continue editing and save. After that you still have the edit window, but if you click "dark side" after saving, then the whole page will be reloaded and you see new edits live.
      I am not sure if that is best way: there are some strengths in this thinking, but it is probably better that after saving there shouldn't be a possibility to continue editing. It might confuse because then if you make edits, click on dark side -> *page refresh* -> You lose your edits.
      ***
      When I get my "starting module" from Ryan, I will turn this into real module. Now I had to make some little tweaks to ProcessPageEdit.module (to keep modal after form submits). These probably won't hurt anything:
      if($this->redirectUrl) $this->session->redirect($this->redirectUrl); if(!empty($_GET['modal'])) $this->session->redirect("./?id={$this->page->id}&modal=true"); // NEW LINE else $this->session->redirect("./?id={$this->page->id}");   and...
      if(!empty($_GET['modal'])) { $form->attr('action', './?id=' . $this->id . '&modal=true'); } else { $form->attr('action', './?id=' . $this->id); // OLD LINE }  
    • By nbcommunication
      I've spent the last while experimenting with srcset implementation - and PageimageSrcset is the result:
      PageimageSrcset
      Provides configurable srcset and sizes properties/methods for Pageimage.
      Overview
      The main purpose of this module is to make srcset implementation as simple as possible in your template code. It does not handle images rendered in CKEditor or similar fields.
      For an introduction to srcset and sizes, please read this Mozilla article about responsive images.
      Pageimage::srcset()
      // The property, which uses the set rules in the module configuration $srcset = $image->srcset; // A method call, using a set rules string // Delimiting with a newline (\n) would also work, but not as readable $srcset = $image->srcset("320, 480, 640x480 768w, 1240, 2048 2x"); // The same as above but using an indexed/sequential array $srcset = $image->srcset([ "320", "480", "640x480 768w", "1240", "2048 2x", ]); // The same as above but using an associative array // No rule checking is performed $srcset = $image->srcset([ "320w" => [320], "480w" => [480], "768w" => [640, 480], "1240w" => [1240], "2x" => [2048], ]); // Use the default set rules with portrait images generated for mobile/tablet devices $srcset = $image->srcset(true); // Return the srcset using all arguments $srcset = $image->srcset("320, 480, 640x480 768w, 1240, 2048 2x", [ "portrait" => "320, 640", ]); // The set rules above are a demonstration, not a recommendation! Image variations are only created for set rules which require a smaller image than the Pageimage itself. On large sites this may still result in a lot of images being generated. If you have limited storage, please use this module wisely.
      Portrait Mode
      In many situations, the ratio of the image does not need to change at different screen sizes. However, images that cover the entire viewport are an exception to this and are often the ones that benefit most from srcset implementation.
      The main problem with cover images is that they need to display landscape on desktop devices and portrait when this orientation is used on mobile and tablet devices.
      You can automatically generate portrait images by enabling portrait mode. It is recommended that you use this in combination with Pageimage::focus() so that the portrait variations retain the correct subject.
      The generated variations are HiDPI/Retina versions. Their height is determined by the portrait ratio (e.g. 9:16). Variations are always generated, regardless of whether the original image is smaller. Upscaling is disabled though, so you may find that some variations are actually smaller than they say they are in their filename.
      The sizes attribute should be used when portrait mode is enabled. Pageimage::sizes will return (orientation: portrait) and (max-width: {maxWidth}px) 50vw by default, which handles the use of these images for retina devices. The maximum width used in this rule is the largest set width.
      Pageimage::sizes()
      There is no option to configure default sizes because in most cases 100vw is all you need, and you do not need to output this anyway as it is inferred when using the srcset attribute. You can use the method for custom sizes though:
      // The property $sizes = $image->sizes; // Returns 100vw in most cases // Returns '(orientation: portrait) and (max-width: {maxWidth}px)50vw' if portrait mode enabled // A method call, using a mixture of integer widths and media query rules // Integer widths are treated as a min-width media query rule $sizes = $image->sizes([ 480 => 50, "(orientation: portrait) and (max-width: 640px)" => 100, 960 => 25, ]); // (min-width: 480px) 50vw, (orientation: portrait) and (max-width: 640px) 100vw, (min-width: 960px) 25vw // Determine widths by UIkit 'child-width' classes $sizes = $image->sizes([ "uk-child-width-1-2@s", "uk-child-width-1-3@l", ]); // (min-width: 640px) 50vw, (min-width: 1200px) 33.33vw // Determine widths by UIkit 'width' classes $sizes = $image->sizes([ "uk-width-1-2@m", "uk-width-1-3@xl", ]); // (min-width: 960px) 50vw, (min-width: 1600px) 33.33vw // Return the portrait size rule $sizes = $image->sizes(true); // (orientation: portrait) and (max-width: {maxWidth}px) 50vw // The arguments above are a demonstration, not a recommendation! Pageimage::render()
      This module extends the options available to this method with:
      srcset: When the module is installed, this will always be added, unless set to false. Any values in the formats described above can be passed. sizes: Only used if specified. Any values in the formats described above can be passed. uk-img: If passed, as either true or as a valid uk-img value, then this attribute will be added. The srcset attribute will also become data-srcset. Please refer to the API Reference for more information about this method.
      // Render an image using the default set rules echo $image->render(); // <img src='image.jpg' alt='' srcset='{default set rules}'> // Render an image using custom set rules echo $image->render(["srcset" => "480, 1240x640"]); // <img src='image.jpg' alt='' srcset='image.480x0-srcset.jpg 480w, image.1240x640-srcset.jpg 1240w'> // Render an image using custom set rules and sizes // Also use the `markup` argument echo $image->render("<img class='image' src='{url}' alt='Image'>", [ "srcset" => "480, 1240", "sizes" => [1240 => 50], ]); // <img class='image' src='image.jpg' alt='Image' srcset='image.480x0-srcset.jpg 480w, image.1240x640-srcset.jpg 1240w' sizes='(min-width: 1240px) 50vw'> // Render an image using custom set rules and sizes // Enable uk-img echo $image->render([ "srcset" => "480, 1240", "sizes" => ["uk-child-width-1-2@m"], "uk-img" => true, ]); // <img src='image.jpg' alt='' data-uk-img data-srcset='image.480x0-srcset.jpg 480w, image.1240x640-srcset.jpg 1240w' sizes='(min-width: 960px) 50vw'> // Render an image using portrait mode // Default rule sets used: 320, 640, 768, 1024, 1366, 1600 // Portrait widths used: 320, 640, 768 // Original image is 1000px wide // Not possible to use portrait mode and custom sets or portrait widths in render() // Sizes attribute automatically added echo $image->render(["srcset" => true]); // <img src='image.jpg' alt='' srcset='image.320x569-srcset-hidpi.jpg 320w, image.640x1138-srcset-hidpi.jpg 640w, image.768x1365-srcset-hidpi.jpg 768w, image.jpg 1024w' sizes='(orientation: portrait) and (max-width: 768px) 50vw'> Configuration
      To configure this module, go to Modules > Configure > PageimageSrcset.
      Set Rules
      These are the default set rules that will be used when none are specified, e.g. when calling the property: $image->srcset.
      Each set rule should be entered on a new line, in the format {width}x{height} {inherentwidth}w|{resolution}x.
      Not all arguments are required - you will probably find that specifying the width is sufficient for most cases. Here's a few examples of valid set rules and the sets they generate:
      Set Rule Set Generated Arguments Used 320 image.320x0-srcset.jpg 320w {width} 480x540 image.480x540-srcset.jpg 480w {width}x{height} 640x480 768w image.640x480-srcset.jpg 768w {width}x{height} {inherentwidth}w 2048 2x image.2048x0-srcset.jpg 2x {width} {resolution}x How you configure your rules is dependent on the needs of the site you are developing; there are no prescriptive rules that will meet the needs of most situations. This article gives a good overview of some of the things to consider.
      When you save your rules, a preview of the sets generated and an equivalent method call will be displayed to the right. Invalid rules will not be used, and you will be notified of this.
      Portrait Mode
      Set Widths
      A comma limited list of widths to create HiDPI/Retina portrait variations for.
      Crop Ratio
      The portrait ratio that should be used to crop the image. The default of 9:16 should be fine for most circumstances as this is the standard portrait ratio of most devices. However, you can specify something different if you want. If you add a landscape ratio, it will be switched to portrait when used.
      Any crops in the set rules ({width}x{height}) are ignored for portrait mode variations as this ratio is used instead.
      UIkit Widths
      If your website theme uses UIkit, you can pass an array of UIkit width classes to Pageimage::sizes to be converted to sizes. The values stored here are used to do this. If you have customised the breakpoints on your theme, you should also customise them here.
      Please note that only 1- widths are evaluated by Pageimage::sizes, e.g. uk-width-2-3 will not work.
      Remove Variations
      If checked, the image variations generated by this module are cleared on Submit. On large sites, this may take a while. It makes sense to run this after you have made changes to the set rules.
      Image Suffix
      You will see this field when Remove Variations is checked. The value is appended to the name of the images generated by this module and is used to identify variations. You should not encounter any issues with the default suffix, but if you find that it conflicts with any other functionality on your site, you can set a custom suffix instead.
      Debug Mode
      When this is enabled, a range of information is logged to pageimage-srcset.
      PageimageSrcsetDebug.js is also added to the <head> of your HTML pages. This will console.log a range of information about the images and nodes using srcset on your page after a window.onresize event is triggered. This can assist you in debugging your implementation.
      The browser will always use the highest resolution image it has loaded or has cached. You may need to disable browser caching to determine whether your set rules are working, and it makes sense to work from a small screen size and up. If you do it the other way, the browser is going to continue to use the higher resolution image it loaded first.
      UIkit Features
      This module implements some additional features that are tailored towards UIkit being used as the front-end theme framework, but this is not required to use the module.
      Installation
      Download the zip file at Github or clone the repo into your site/modules directory. If you downloaded the zip file, extract it in your sites/modules directory. In your admin, go to Modules > Refresh, then Modules > New, then click on the Install button for this module. ProcessWire >= 3.0.123 is required to use this module.
    • By nbcommunication
      Wondering how to get that A+ rating on Mozilla Observatory? Now you can with ⭐⭐⭐MarkupContentSecurityPolicy⭐⭐⭐
      Of course, MarkupContentSecurityPolicy does not guarantee an A+ rating, but it does help you implement a Content Security Policy for your ProcessWire website.
      Markup Content Security Policy
      Configure and implement a Content Security Policy for all front-end HTML pages.
      This module should only be used in production once it has been fully tested in development. Implementing a Content Security Policy on a site without testing will almost certainly break something!
      Overview
      Website Security Auditing Tools such as Mozilla Observatory will only return a high score if a Content Security Policy is implemented. It is therefore desirable to implement one.
      A common way of adding the Content-Security-Policy header would be to add it to the .htaccess file in the site's root directory. However, this means the policy would also cover the ProcessWire admin, and this limits the level of security policy you can add.
      The solution is to use the <meta> element to configure a policy, for example: <meta http-equiv="Content-Security-Policy" content="default-src 'self'; img-src https://*; child-src 'none';">. MarkupContentSecurityPolicy places this element with your configured policy at the beginning of the <head> element on each HTML page of your site.
      There are some limitations to using the <meta> element:
      Not all directives are allowed. These include frame-ancestors, report-uri, and sandbox. The Content-Security-Policy-Report-Only header is not supported, so is not available for use by this module. Configuration
      To configure this module, go to Modules > Configure > MarkupContentSecurityPolicy.
      Directives
      The most commonly used directives are listed, with a field for each. The placeholder values given are examples, not suggestions, but they may provide a useful starting point.
      You will almost certainly need to use 'unsafe-inline' in the style-src directive as this is required by some modules (e.g. TextformatterVideoEmbed) or frameworks such as UIkit.
      Should you wish to add any other directives not listed, you can do so by adding them in Any other directives.
      Please refer to these links for more information on how to configure your policy:
      https://developer.mozilla.org/en-US/docs/Web/HTTP/CSP https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Security-Policy https://scotthelme.co.uk/content-security-policy-an-introduction/ https://developers.google.com/web/fundamentals/security/csp/ Violation Reporting
      Because the report-uri directive is not available, when Violation Reporting is enabled a script is added to the <head>which listens for a SecurityPolicyViolationEvent. This script is based on https://developer.mozilla.org/en-US/docs/Web/API/SecurityPolicyViolationEvent and POSTs the generated report to ?csp-violations=1. The module then logs the violation report to csp-violations.
      Unfortunately, most of the violations that are reported are false positives, and not actual attempts to violate the policy. These are most likely from browser extensions and are not easy to determine and filter.
      For this reason, there is no option for the report to be emailed when a policy is violated. Instead, you can specify an endpoint for the report to be sent to. This allows you to handle additional reporting in a way that meets your needs. For example, you may want to log all reports in a central location and send out an email once a day to an administrator notifying them of all sites with violations since the last email.
      Retrieving the Report
      To retrieve the report at your endpoint, the following can be used:
      $report = file_get_contents("php://input"); if(!empty($report)) { $report = json_decode($report, 1); if(isset($report) && is_array($report) && isset($report["documentURI"])) { // Do something } } Debug Mode
      When this is enabled, a range of information is logged to markup-content-security-policy. This is probably most useful when debugging a reporting endpoint.
      Additional .htaccess Rules
      To get an A+ score on Mozilla Observatory, besides using HTTPS and enabling the HSTS header, you can also place the following prior to ProcessWire's htaccess directives:
      Header set Content-Security-Policy "frame-ancestors 'self'" Header set Referrer-Policy "no-referrer-when-downgrade" Installation
      Download the zip file at Github or clone the repo into your site/modules directory. If you downloaded the zip file, extract it in your sites/modules directory. In your admin, go to Modules > Refresh, then Modules > New, then click on the Install button for this module. ProcessWire >= 3.0.123 is required to use this module.
×
×
  • Create New...