Jump to content



Recommended Posts

  • 2 months later...

Just wanted to post a little warning here.

@SteveB PM'd me with an issue he was have with a relatively complex migration. I initially tested on PW 2.5.3 and everything worked flawlessly in several tests, which is great!

But then testing on the latest PW dev there were some significant issues with certain pages not ending up where they were supposed to be, so I need to look into this in more detail, but just wanted to remind you guys on dev to be careful until I figure this out. Not sure what version of PW this started happening with.

  • Like 1
Link to comment
Share on other sites

  • 5 months later...

An update on the status of Migrator with respect to current dev version of PW (soon to be stable 2.7) would be much appreciated!

Reading this thread I get the sense that, understandably, there are plenty of edge case problems but do we know what's working reliably on recent PW installations? I'm piecing together a staging-to-live strategy for a site where most of the content will be imported from non-PW data sources (including images).

One way is to first delete those pages which get imported from the external data, then use the reliable method of copying over the whole database, the site folders (templates and modules) and any necessary config, .htaccess, index.php tweaks. This keeps users, roles, user/role mapping and template access settings intact.

I feel as though a "cleaner" way would be to explicitly export/import users, roles, user/role mapping and all template settings. Then I could start with a clean PW install. How much of that might Migrate be able to do these days?



Link to comment
Share on other sites

Hi Steve,

I am sorry, I haven't had time to work on Migrator for a while now. It is definitely not abandoned - I just need to find a good chunk of time to revisit a few things regarding Page fields and sort out remaining bugs. I will try to take a look at this sometime soonish.

Regarding the last part of your question - Migrator currently creates new users/roles if the creator/modifier of the imported content was created by a user that doesn't exist on the new site. The problem of course is migrating the user's password - is this a requirement in your scenario? All the template settings etc are all handled completely by Migrator.

I also have some aspirations to take Migrator a step further and allow it to connect directly to another site and sync changes, but if this happens it will be some time away and will likely be a commercial version of Migrator.

I am not sure if that really helps you at the moment. I am away for the next few days and busy for the week or so after that, but might see if I can get a new version out before the end of the month - but no promises :)

  • Like 4
Link to comment
Share on other sites

  • 7 months later...

Hi Adrian

this module looking very good! But i have some strange problems. So export on page tree from one site (whole tree; pw 3.0.15) wich works very well. And I want to import it on PW 3.0.18 System. wich seems to work also well. Templates and fields are created. I also get the info "Created all required templates and fields and imported/edited 140 pages" but if I view on the page tree nothing is there. I dont see any errors. So maybe its because of the 3.0.x version. Do you have tested it with the 3.0.x version?

What else could I try?

Link to comment
Share on other sites

@jensweigel - please try this commit: https://github.com/adrianbj/ProcessMigrator/tree/3e2121b8fdb68e9d9dc0c6aca8aae75e923a2669

I also have a PR from @jlahijani (https://github.com/adrianbj/ProcessMigrator/pull/5) which may also take care of the problem. I will try to make some time today to review his changes and the last working commit noted above and get a new version out.

Link to comment
Share on other sites

  • 1 month later...

Seems like Migrator has problems with templates that include InputfieldPageTable fields. When importing pages that include this fieldtype, Migrator also creates the pages that are stored inside this fieldtype.

Link to comment
Share on other sites

4 hours ago, charger said:

Seems like Migrator has problems with templates that include InputfieldPageTable fields. When importing pages that include this fieldtype, Migrator also creates the pages that are stored inside this fieldtype.

HI @charger - isn't that the desired behavior? If it didn't create the pages that belong to the Page Table then you wouldn't be migrating all the content. Maybe I am misunderstanding though?

Link to comment
Share on other sites

You’re of course right. The problem is that the pages that reside in these InputfieldPageTable fields will be moved out of their previous (nested) structure and are applied (flat) to the parent one selects during import.

Link to comment
Share on other sites

  • 5 months later...

I'm trying to use this module to get pages to an external translation agency, that uses a translation memory. The multilanguage modules are in use and working fine. [Added English manually to the Dutch (default) site, trying to add French and German automatically.]

What worked fine:

  • Export of all pages as a json file
  • Import of that json file in their translation software
  • Inspection of their translated json file in Atom - looks fine

Then I tried to import their file, and that failed.

  • Append: nothing changed — expected behaviour
  • Overwrite/Replace: shows me this error
Error: Uncaught Error: Call to a member function setLanguageValue() on null in /Applications/MAMP/htdocs/site/modules/ProcessMigrator/ProcessMigrator.module:1441
Stack trace:
#0 /Applications/MAMP/htdocs/site/modules/ProcessMigrator/ProcessMigrator.module(161): ProcessMigrator->processImportForm2(Object(ProcessWire\InputfieldForm))
#1 /Applications/MAMP/htdocs/wire/core/Wire.php(374): ProcessMigrator->___executeImport()
#2 /Applications/MAMP/htdocs/wire/core/WireHooks.php(698): ProcessWire\Wire->_callMethod('___executeImpor...', Array)
#3 /Applications/MAMP/htdocs/wire/core/Wire.php(402): ProcessWire\WireHooks->runHooks(Object(ProcessMigrator), 'executeImport', Array)
#4 /Applications/MAMP/htdocs/wire/core/ProcessController.php(244): ProcessWire\Wire->__call('executeImport', Array)
#5 /Applications/MAMP/htdocs/wire/core/Wire.php(374): ProcessWire\ProcessController->___execute()
#6 /Applications/MAMP/htdocs/wire/core/WireHooks.php(698): ProcessWire\Wire->_ (line 1441 of /Applications/MAMP/htdocs/site/modules/ProcessMigrator/ProcessMigrator.module) 


Link to comment
Share on other sites

I did some further testing.

When I choose Replace instead of Overwrite, all texts with multi-language input are deleted, including default language.

I even tested with exporting to a zip, and then importing that same zip. Same errors. So, it's not related to what the translator could have done with the files.

Link to comment
Share on other sites

3 hours ago, mds said:

Inspection of their translated json file in Atom - looks fine

Just because it looks like valid json doesn't mean it's in the correct format for Migrator.

But could you please make sure you are using this version of Migrator: https://github.com/adrianbj/ProcessMigrator/tree/3e2121b8fdb68e9d9dc0c6aca8aae75e923a2669

It is two commits behind, but it looks like some bugs were introduced since that commit.

As an update on this project. I still do want to get back to it, but I am now going to wait until Ryan completes all the new core page migration tools so I can use those new core methods. Will wait and see exactly what functionality he builds and extend from there if needed.

  • Like 2
Link to comment
Share on other sites

Thanks, Adrian. Very grateful. 
That version doesn't spit out the error I mentioned.

I get another error now: the Home-page gets added as a new page on import, but that's something I can manually adjust.

Looking forward to updates on exporting/importing/migrating.
Loving Processwire so far, and it's only early days!

Link to comment
Share on other sites

  • 1 month later...

Will this module be updated for PW 3.x?

I have problems like: "Call to a member function setLanguageValue() on a non-object"

Line 1441 of ProcessMigrator.module.

Is there a similar working tool for copying local pages (trees) to remote?

Thank you.

Link to comment
Share on other sites

Hi @theo - this looks related to (https://github.com/adrianbj/ProcessMigrator/issues/4).

What commit are you using? Please try this one (two back from current) - https://github.com/adrianbj/ProcessMigrator/tree/3e2121b8fdb68e9d9dc0c6aca8aae75e923a2669

I will likely recreate this module in the future after Ryan fully implements the new core methods for exporting/importing pages



Tools for exporting and importing of pages. We've got some nice built-in tools for importing and exporting of templates and fields, but not yet for pages. Over the coming year, I'm hoping to add page import/export as well. I'd like to be able to copy/paste a page or group of pages from one server to another.


I just don't have the time to put more effort into the current iteration of this, especially given that future versions should make use of the new core features.

  • Like 2
Link to comment
Share on other sites

  • 4 weeks later...

Hello all. 

After playing with PW for some time now and having a heavy WP website, I decided to look this morning about a way to migrate WP to PW (how ironically it sounds ;) ). And here I am - trying out the MigratorWordpress.

Downloaded the XML file (18Mb containing around 700 posts and over 5000 comments). Uploaded the file and started the import. At the end, everything went smooth and I was suggested to check the imported pages. I was not surprised to find out that the import only did find some pages but not the posts itself (no offense to the authors for sure). This issue was not new to me as I was trying to import WP to ModX long time ago and ran into it as well. So what helped me at that time was a simple WP plugin caled Post Type Switcher that allowed me to move all the WP posts from custom post type to the default WP posts. After that I was able to import posts and comments almost flawlessly (I say almost, as I still had to go around the posts and clear the short-tag leftovers etc. - which is not an issue). 

As of now, I am testing the same approach to see if that would work again and will report back. My biggest concern is to have the posts properly imported and attached to their comments. I do not mind loosing keywords etc. as I am planning on redoing every post manually but moving comments that way would be an overkill ;)

Link to comment
Share on other sites

Ok. All custo post types were converted back to standard wordpress posts and then the XML was exported using the Tools->Export feature. Then installed the both required modules - ProcessMigrator and MigratorWordpress and tried to import the posts into a newly created page called Import. Unfortunately it did not work with PW 2.8.5 and blows an error:

Error: Call to a member function get() on a non-object (line 1450 of C:\OpenServer\domains\recipemagician.pw\site\modules\ProcessMigrator\ProcessMigrator.module) 

This error message was shown because: you are logged in as a Superuser. Error has been logged.

I tried with the latest 3.0.55 and it did not work either. Is there any specific version to try with that would seemed to work?

Link to comment
Share on other sites

2 minutes ago, MilenKo said:

Thanks Adrian. Testing it now. Would you recommend using 3.X or 2.X?

Migrator and MigratorWordpress were written for 2.x so that might be safer, but I have used Migrator itself with 3.x without any issues, but I haven't used MigratorWordpress with 3.x yet.

FYI - as I mention above:

On 1/11/2017 at 7:07 AM, adrian said:

As an update on this project. I still do want to get back to it, but I am now going to wait until Ryan completes all the new core page migration tools so I can use those new core methods. Will wait and see exactly what functionality he builds and extend from there if needed.


Link to comment
Share on other sites

Adrian, that is understandable considering the amount of work and changes that needs to be applied. Will try now with 2x version and see how it goes. In regards to the shorcodes, this was one of the things that initially pushed me to search for another CMS. I used a few themes before starting to deal with the next one on my own and with every theme change there were more and more shortcodes used. After the latest theme some were dropped out so it got ugly. That is why all I care is to have the comments and posts imported properly. The rest I will setup up/change/clean myself as a part of the process and learning curve ;)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Similar Content

    • By monollonom
      Github: https://github.com/romaincazier/PageMjmlToHtml
      Modules directory: https://processwire.com/modules/page-mjml-to-html/ (pending approval)
      A module allowing you to write your Processwire template using MJML and get a converted HTML output using MJML API.
      This is considered to be in alpha and as such needs some testing before being used in production!

      Created by Mailjet, MJML is a markup language making it a breeze to create newsletters displayed consistently across all email clients.
      Write your template using MJML combined with Processwire’s API and this module will automatically convert your code into a working newsletter thanks to their free-to-use Rest API.
      For this module to work you will need to get an API key and paste it in the module’s configuration.
      Once your credentials are validated, select the template(s) in which you’re using the MJML syntax, save and go visualize your page(s) to see if everything’s good. You will either get error/warning messages or your email properly formatted and ready-to-go.
      From there you can copy/paste the raw generated code in an external mailing service or distribute your newsletter using ProMailer.
      The MJML output is cached to avoid repetitive API calls Not cached if there are errors/warnings Cleared if the page is saved Cleared if the template file has been modified A simple (dumb?) code viewer highlights lines with errors/warnings A button is added to quickly copy the raw code of the generated newsletter Not added if the page is rendered outside of a PageView Only visible to users with the page’s edit permission A shortcut is also added under “View” in the edit page to open the raw code in a new tab Multi-languages support
      The code viewer is only shown to superusers. If there’s an error the page will display:
      Only its title for guests Its title and a message inviting to contact the administrator for editors If you are using the markup regions output strategy, it might be best to not append files to preserve your MJML markup before calling the MJML API. This option is available in the module’s settings.
    • By Marco Ro
      Hi guys!
      I'm a bit anxious because this is the first module I present! (beta modulo) But I will finally be able to share something with the community too! :)
      This is a BETA version of the PayPal payment system called: PayPal Commerce Platform.
      It is an advanced system (Business Pro account is needed) that brings various benefits in terms of fees and above all integrates direct payment with credit/debit cards. 
      The module integrates with Padloper 0.0.2, which is the current installation I'm using.
      This system integrates the classic PayPal buy button, the alternative or local payment method and the new payment system: credit/debit cards that doesn't go through the PayPal account. It is a Stripe-style payment, it connects directly with the bank and integrates 3D security validation.
      I say that it is a BETA because this module currently only works with Sandbox account, to put it live you need to change API url manually (manually for the moment).
      Because this module is not ready for live:
      I would like to have your opinion on how I built the module (is the first one I do). I don't want to share something that is not fish but I need a comparison with someone more experienced than me, for be sure that this is the best way to code the module.
      If you want to try this I created a git, you will find all the instructions for installation and correct operation. (Git has a MIT licensed)
      https://github.com/MarcooRo/processwire-PayPal-Commerce-Platform I hope I did something that you guys can like :)
    • By monollonom
      (once again I was surprised to see a work of mine pop up in the newsletter, this time without even listing the module on PW modules website 😅. Thx @teppo !)
      Github: https://github.com/romaincazier/FieldtypeQRCode
      Modules directory: https://processwire.com/modules/fieldtype-qrcode/
      A simple fieldtype generating a QR Code from the public URL of the page, and more.
      Using the PHP library QR Code Generator by Kazuhiko Arase.

      In the field’s Details tab you can change between .gif or .svg formats. If you select .svg you will have the option to directly output the markup instead of a base64 image. SVG is the default.
      You can also change what is used to generate the QR code and even have several sources. The accepted sources (separated by a comma) are: httpUrl, editUrl, or the name of any text/URL/file/image field.
      If LanguageSupport is installed the compatible sources (httpUrl, text field, ...) will return as many QR codes as there are languages. Note however that when outputting on the front-end, only the languages visible to the user will be generated.
      Unformatted value
      When using $page->getUnformatted("qrcode_field") it returns an array with the following structure:
      [ [ "label" => string, // label used in the admin "qr" => string, // the qrcode image "source" => string, // the source, as defined in the configuration "text" => string // and the text used to generate the qrcode ], ... ] Formatted value
      The formatted value is an <img>/<svg> (or several right next to each other). There is no other markup.
      Should you need the same markup as in the admin you could use:
      $field = $fields->get("qrcode_field"); $field->type->markupValue($page, $field, $page->getUnformatted("qrcode_field")); But it’s a bit cumbersome, plus you need to import the FieldtypeQRCode's css/js. Best is to make your own markup using the unformatted value.
      Static QR code generator
      You can call FieldtypeQRCode::generateQRCode to generate any QR code you want. Its arguments are:
      string $text bool $svg Generate the QR code as svg instead of gif ? (default=true) bool $markup If svg, output its markup instead of a base64 ? (default=false) Hooks
      Please have a look at the source code for more details about the hookable functions.
      $wire->addHookAfter("FieldtypeQRCode::getQRText", function($event) { $page = $event->arguments("page"); $event->return = $page->title; // or could be: $event->return = "Your custom text"; }) $wire->addHookAfter("FieldtypeQRCode::generateQRCodes", function($event) { $qrcodes = $event->return; // keep everything except the QR codes generated from editUrl foreach($qrcodes as $key => &$qrcode) { if($qrcode["source"] === "editUrl") { unset($qrcodes[$key]); } } unset($qrcode); $event->return = $qrcodes; })
    • By Sebi
      AppApiFile adds the /file endpoint to the AppApi routes definition. Makes it possible to query files via the api. 
      This module relies on the base module AppApi, which must be installed before AppApiFile can do its work.
      You can access all files that are uploaded at any ProcessWire page. Call api/file/route/in/pagetree?file=test.jpg to access a page via its route in the page tree. Alternatively you can call api/file/4242?file=test.jpg (e.g.,) to access a page by its id. The module will make sure that the page is accessible by the active user.
      The GET-param "file" defines the basename of the file which you want to get.
      The following GET-params (optional) can be used to manipulate an image:
      width height maxwidth maxheight cropX cropY Use GET-Param format=base64 to receive the file in base64 format.
    • By MarkE
      This fieldtype and inputfield bundle was built for storing measurement values within a field, rendering them in a variety of formats and converting them to other units or otherwise modifying them via the API.
      The API consists of a number of predefined functions, some of which include...
      render() for rendering the measurement object, valueAs() for converting the value to another unit value, convertTo() for converting the whole measurement object to different units, and add() and subtract() for for modifying the stored value by the value (converted as required) in another measurement. In the admin the inputfield includes a checkbox (which can be optionally disabled) for converting values on page save. For an example if a value was typed in as centimeters, the unit was changed to metres, and the page saved with this checkbox selected, said value would be automatically converted so that e.g. 170 cm becomes 1.7 m.

      A simple length field using Fieldtype Measurement and Inputfield Measurement.
      Combination units (e.g. feet and inches) are also supported.
      Please note that this module is 'proof of concept' at the moment - there are limited units available and quite a lot of code tidying to do. More units will be added shortly.
      See the GitHub at https://github.com/MetaTunes/FieldtypeMeasurement for full details and updates.
  • Create New...