justb3a

Simple Contact Form

Recommended Posts

@justb3a: i increased the max_execution_time from 30 to 60 sec. the memory_limit is at 256M and still the same problem. :huh:

Share this post


Link to post
Share on other sites

@itsberni: 60 is not enough. Try the following values:

max_execution_time = 240
max_input_time = 240
memory_limit = 1024M 

Share this post


Link to post
Share on other sites

Hi Congomonster,

you have to change the fieldname. in your case scf_fullName in e.g. scf_Nachname. Be carefull. the prefix scf_ is important.

And you also have to change the values ( input - Tag ) in your form. But here you go without the prefix!

Don´t forget to adapt the fieldnames in your modulconfiguration. also without the prefix.

Hi itsberni,

thank you for answer. It worked except for the date field. :frantics:

For now it's perfect! :biggrin:

Share this post


Link to post
Share on other sites

@congomonster: I have to find / provide another solution for this issue. For now it's ok but it shouldn't be the solution to solve it that way...  :mellow:

Share this post


Link to post
Share on other sites

@itsberni: 60 is not enough. Try the following values:

max_execution_time = 240
max_input_time = 240
memory_limit = 1024M 

thanks, justb3a - i've tried this values.

After a very long period of time, the mails are appearing.

I think that's way to long. Could that be caused by the repeater, that slows down everthing in my case?!

the contactform is in a testphase already, so there are a lot of entries ( about 180 ).

If i try to delete data in the repeater, the script tooks again a very long period of time an after that, the tagged

data is not deleted. :(

Any ideas though?

Share this post


Link to post
Share on other sites

Can anybody help me?

I have been trying for two full days to get this module running - thats OK because I am still learning. With everything else so far (e.g. include a simpler contact form and make it work) I was able to figure it out by modifying stuff I found elsewhere but now I am stuck.

I installed the module, set up the template file and the HTML works: I get a page with fields and I can enter data. But when I press „submit“ nothing happens. I get no error message, nothing.

I have tried to address the module through php and through JS, I tried hundreds of variations of syntax, it seems I do something wrong addressing the module.

Could anybody please supply me with an example for a full and correct code and let me know where to insert it?

Thanks A LOT!

Share this post


Link to post
Share on other sites

Using a honeypot I am able to filter out almost all spambots surprisingly, that may just be me, but using this method I have been pretty successful. 

Share this post


Link to post
Share on other sites

@Kami: Please have a look at your log file (simplecontactform-log). 

Edit: Please set $config->debug in site/config.php to true and try again  ^_^

@itsberni: Sorry for answering that late. I guess we must transfer the form action to the frontend by using pagination (20 entrys a page).

Share this post


Link to post
Share on other sites

Thanks, I set $config->debug to "true" and restarted PW but in PW/Setup/Logs I only see a simplecontactform-spam-log, no simplecontactform-log?

Share this post


Link to post
Share on other sites

And no error message appears (frontend or error log). Does it reload the page if you press submit? Is there an entry in  simplecontactform-spam-log? There is a setting called antiSpamTimeMin, if you submit the form really fast, the content will be treated as spam. There should be an entry in the spam log. Try to set this setting (in module settings) to 0.

Share this post


Link to post
Share on other sites

There is an error message but it concerns a template I don´t use (?) so I am not sure it is related: "Error: Call to undefined function renderNav() (line 12 of /Applications/MAMP/htdocs/site/templates/basic-page.php)". Line 12 is: "renderNav($page->children);".

There is an entry in the spam-log but its date is from yesterday: "CSRF Token validation failed."
 

The page seems to reload when I press submit, it keeps the entries in "name" and "email" but not the entry in the message field. AntiSpamTimeMin is set to 0.

Share this post


Link to post
Share on other sites

There is an error message but it concerns a template I don´t use (?) so I am not sure it is related: "Error: Call to undefined function renderNav() (line 12 of /Applications/MAMP/htdocs/site/templates/basic-page.php)". Line 12 is: "renderNav($page->children);".

This is another error message which is not related to this module. Somewhere in your template you call renderNav($page->children) but this function doesn't exist. This function comes with a basic ProcessWire installation and is located in _func.php which is required by _init.php ($config->prependTemplateFile in config.php)

There is an entry in the spam-log but its date is from yesterday: "CSRF Token validation failed."

This module uses CSRF token validation, if you don't know what it's all about, have a look here. In your form there must be an hidden input field, make sure that it's still there (<input type='hidden' name='<?= $input->tokenName; ?>' value='<?= $input->tokenValue; ?>' class='_post_token' />).

Check also that there is another hidden input field: <input type="hidden" name="submitted" value="1">. Do not remove one of them!

Share this post


Link to post
Share on other sites

Hello, I installed this module. I have a problem when submitting the form, I get the error message to verify data. What could be the problem?

Example:

ASBSKSa.jpg

Edited by Bam Bino

Share this post


Link to post
Share on other sites

@Bam Bino: Did you remove some fields? I can't see scf-website as well as submitted. These fields are necessary for validation. If I just install the module without any config / html - css adaptions, it should look like this:

post-2759-0-79695600-1436778971_thumb.pn

Share this post


Link to post
Share on other sites

The scf-date field should be invisible as well. Please add in site/modules/SimpleContactForm/SimpleContactForm.module after line 424 var_dump($field); and paste the output (make sure $config->debug is set to true in site/config.php):

foreach ($form as $field => $value) {
  if (empty($value)) {
    var_dump($field);
    $error = true;
    continue;
  }
}

Share this post


Link to post
Share on other sites

Hi, justb3a. I did as you instructed, but I get zero output of var_dump when I submit the form. It goes like this:

1. I fill the form

lhXkJp7.png

2. When I submit it I get the error message:

yfQaRh8.png

3. When I resubmit the form I am redirected to home page:

pZB6qlt.png

4. As modules documentation says it means that it was marked as spam, so I open simplecontactform-spam-log.txt for the error information"

4gm8Cef.png

Share this post


Link to post
Share on other sites

I've run into an issue where if I trigger an error state (say by leaving the form blank or by skipping a required field) the next submission always redirects to the homepage while generating a "CSRF Token validation failed" message. Everything else is working presently. Any ideas?

(PW 2.6.1)

I have a couple of small feature suggestions that would be nice: 1) The ability to assign a "From" name for generated emails; 2) The ability to send messages to multiple recipients. Thanks!

Share this post


Link to post
Share on other sites

New version 0.1.2

* fixes CSRF token validation (Thanks!)

* adds option to overwrite email message

* adds "from name" for generated email

* allows multiple recipients

  • Like 4

Share this post


Link to post
Share on other sites

Hello,

I just need to setup a simple contact form so, I installed SimpleContactForm.

Then I went to Admin >> ModulesSimple >> Contact Form and followed the instruction.

After I included below code into my contact.php and refresh the page, nothing came out @ blank page.

<?php $modules->get('SimpleContactForm')->render(); ?>

If I have the budget I could buy myself the FormBuilder but sadly not so much at the moment.

Please tell me, is there any way to fix this issue or if there's something I overlooked ?

Thank you.

Edited by kongondo
Merged to SimpleContactForm's support forum

Share this post


Link to post
Share on other sites

I have managed to call the contact form by adding echo

<?php echo $modules->get('SimpleContactForm')->render(); ?> 

 but there are 2 more issues :

1) How do you replace unordered list bullets which appear near the form label ?

post-3657-0-81343700-1439976399_thumb.pn

2) When I submitted the form my browser got redirected to the Home page and found out the simple_contact_form.php don't have any value in action="./" . How to fix this ?

post-3657-0-75658500-1439976609_thumb.pn

Thank you

Share this post


Link to post
Share on other sites

@kradzcalypse:

1) A new template called simple_contact_form.php will be created in your site/templates directory. Once created you can/should modify the template as well as the fields to your own needs, just make sure to maintain the names of the fields. So you can substitute the list (<ul> <li>..) tags with divs or adapt your css and set "list-style: none;" for this list.

To hide the fields adapt the css using for example "display: none;".

2) The action is not empty. action="./" refers to the current page. Have a look at your log file (Admin > Setup > Logs > simplecontactform-log). I guess the spam protection applies here and redirects you to the home page.

----------------------------------------------------

PS: These are simple basics of CSS and HTML.  ^_^ 

  • Like 1

Share this post


Link to post
Share on other sites

Hi,

Thanks for your reply. 

Please have a look at my contact page : http://pesisirbrand.com/contact/

After filling up the contact form and press submit button the browser return the Home page but data never got submitted

to inbox here : http://pesisirbrand.com/scf-messages/

Admin > Setup > Logs > simplecontactform-log returned :

 

[FAILURE] Honeypot field was filled.

Share this post


Link to post
Share on other sites

The field you named "Web Url (Optional)" is not allowed to be filled. This field should be invisible. Spam boots are used to fill every field and the honey pot technique is one way to keep them out. Hide this field, add one field more to get a web url field if needed.

Share this post


Link to post
Share on other sites

Thanks justb3a,

It works. 

I tried adding 3 more input fields into the form (Address, Telephone Number & Identification) and then created 3 new fields in the admin section but where can I define the input id ( e.g : Inputfield_Alamat ) for those 3 new form fields ?

Here are things that I've done so far ..

simple_contact_form.php

<div class="form-group">
		<label class="col-md-3 control-label" for='Inputfield_Alamat'>Alamat<i class='toggle-icon fa fa-angle-down' data-to='fa-angle-down fa-angle-right'></i></label>
		<div class="col-md-9">

<input id="Inputfield_Alamat" class="form-control" name="Address" value="<?= $input->Alamat; ?>" type="text" maxlength="2048" placeholder="" />
		</div>
            </div>

site/modules/SimpleContactForm/SimpleContactForm.module

protected static $defaults = array(
    'fullName' => '',
    'Address' => '',
    'Telephone Number' => '',
    'Identification' => '',
    'emailTo' => '',
    'emailSubject' => 'New Web Contact Form Submission',
    'successMessage' => 'Thank you, your submission has been sent.',
    'errorMessage' => 'Please verify the data you have entered.',
    'emailMessage' => '',
    'emailServer' => 'noreply@server.com',
    'allFields' => 'fullName,Alamat,Telefon,KadPengenalan,email,message',
    'requiredFields' => 'fullName,Alamat,Telefon,KadPengenalan,email,message',
    'emailField' => 'email',
    'saveMessages' => true,
    'antiSpamTimeMin' => '0',
    'antiSpamTimeMax' => '90',
    'antiSpamPerDay' => '3',
    'antiSpamExcludeIps' => '127.0.0.1',
    'antiSpamCountAdditionalInputs' => '5',
    'useTwig' => false,
    'cleanup' => 0
  );

.....

.....

public static function getModuleConfigInputfields(array $data) {
    $fields = new InputfieldWrapper();
    $modules = wire('modules');

    // default config values
    $data = array_merge(self::$defaults, $data);

......
.......

     'Address' => array(
        'type' => 'InputfieldText',
        'description' => 'Fallback: Alamat',
        'size' => 45,
        'placeholder' => 'Alamat',
        'columnWidth' => 50
      ),
      'Telephone Number' => array(
        'type' => 'InputfieldText',
        'description' => 'Fallback: Telefon',
        'size' => 45,
        'placeholder' => 'Telefon',
        'columnWidth' => 50
      ),
      'Identification' => array(
        'type' => 'InputfieldText',
        'description' => 'Fallback: Kad Pengenalan',
        'size' => 45,
        'placeholder' => 'Kad pengenalan',
        'columnWidth' => 50
      ),

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By thomasaull
      Some time ago I created a site profile for creation of a REST API with ProcessWire. Since I kept struggeling with updating stuff between different projects which use this, I decided to convert it into a module. It is now ready for testing: https://github.com/thomasaull/RestApi
      Additionally I added a few small features:
      automatic creation of JWT Secret at module install routes can be flagged as auth: false, which makes them publicly accessible even though JWT Auth is activated in module settings To check things out, download and install the module and check the folder /site/api for examples.
      If you find any bugs or can think of improvements, please let me know!
    • By kongondo
      Sites Manager
       
      16 September 2018:
      FOR NOW, PLEASE DO NOT USE THIS MODULE IN A PRODUCTION SITE. A  RECENT ProcessWire UPDATE HAS BROKEN THE MODULE. I AM WORKING ON A FIX.
       
      ################
       
      Sites Manager is a module for ProcessWire that allows Superusers to easily create/install ProcessWire sites on the same serverspace the module is running in. Only Superusers can use the module. You can create both stand-alone and multi-sites.
       
      Single/Stand-alone Sites
      Stand-alone or single-sites are sites that will run in their own document root/directory with their own wire and site folders, .htaccess, index.php, etc. In other words, a normal ProcessWire site.
      Multiple Sites
      Multi-sites are sites that will run off one wire folder (shared amongst two or more sites) each having their own site folder and database. In this regard, it is important to note that Sites Manager is not in itself a multiple sites solution! Rather, it is a utility that helps you create multi-sites to be run using the ProcessWire core multiple sites feature. For more on this core feature, see the official ProcessWire documentation, specifically the solution referred to as Option #1.
      Option #1 approach requires the site admin to initially install ProcessWire in a temporary directory for each new site. The directory then needs to be renamed as site-xxx, where ‘xxx’ is any name you want to use to differentiate the installation from other sites, before it is moved to the webroot. For instance, site-mysite, site-another, site-whatever. In addition, the /wire/index.config.php file must be copied/moved to the webroot. Each time a site is added, the index.config.php has to be edited to add ‘domain’ => ‘site-directory’ key=>value pairs for the site. This process can become a bit tedious. This module aims to automate the whole multi-site site creation process.
      The module is based off the official ProcessWire installer. Creating a site is as simple as completing and submitting a single form! You also have the option to type and paste values or reuse a pre-defined install configuration.
       
      The module will:
      Install a ProcessWire site in your named directory, applying chmod values as specified
      Move the directory to your webroot
      Update/Create a Superuser account as per the submitted form, including setting the desired admin theme and colour
      For multi sites, update sites.json (used by index.config.php to get array of installed sites)
       
      For multi sites, the only difference in relation to the core multi-sites index.config.php is that this file is slightly different from the one that ships with ProcessWire.
      Download from GitHub: Sites Manager (Beta Release)
      Features
      Install unlimited number of sites in one (multi-sites) or independent (single-site) ProcessWire installs. Install by completing a Form, Typing or pasting in configurations or using pre-created install configurations. Choose an Admin Theme to auto-install along with the site installation. For single-sites installation, download, save and reuse ProcessWire versions of your choice. Install and maintain site profiles for reuse to create other sites. Create install configurations to speed up installation tasks. Client and server-side validation of site creation values. Edit uploaded profiles (e.g., replace profile file). Lock installed sites, configurations and profiles to prevent editing. Bulk delete items such as site profiles, installed site directories and/or databases (confirmation required for latter two). View important site details (admin login, chmod, etc). Links to installed sites home and admin pages. Timezones auto-complete/-suggest. Pre-requisites, Installation & Usage
      Please see the documentation.
      Technicalities/Issues
      Only Superusers can use the module.
      ProcessWire 2.7 - 3.x compatible
      Currently using ProcessWire 2.7 installer (install.php)
      For multi-sites, potential race condition when sites.json is being updated on a new site install vs. index.config.php accessing the json file?
      Not tested with sub-directory installs (for instance localhost/pw/my-site-here/)
      Currently not doing the extra/experimental database stuff (database charset and engine)
      Future Possibilities
      Install specified modules along with the ProcessWire install
      Profile previews?
      Credits
      @ryan: for the ProcessWire installer
      @abdus: for the index.config.php reading from JSON idea
      @swampmusic: for the challenge
      Video Demo
      Demo  showing how quick module works on a remote server [YMMV!]. Video shows downloading and processing two versions of ProcessWire (~takes 7 seconds) and installing a single/stand-alone ProcessWire 3 site using the new Admin Theme UI Kit (~2 seconds) on a remote server.
       
      Screens
      1

      2

       
       
    • By Robin S
      Breadcrumb Dropdowns
      Adds dropdown menus of page edit links to the breadcrumbs in Page Edit.

      Installation
      Install the Breadcrumb Dropdowns module. The module requires ProcessWire >= v3.0.83 and AdminThemeUikit.
      There is a checkbox option in the module config that determines if the breadcrumb dropdowns will include pages that the user does not have permission to edit.
      Features/details
      The module adds an additional breadcrumb item at the end for the currently edited page. That's because I think it's more intuitive for the dropdown under each breadcrumb item to show the item's sibling pages rather than the item's child pages. In the dropdown menus the current page and the current page's parents are highlighted in a crimson colour to make it easier to quickly locate them in case you want to edit the next or previous sibling page. Unpublished and hidden pages are indicated in the dropdowns with similar styling to that used in Page List. If the option to include uneditable pages is selected then those pages are indicated by italics with a reduced text opacity and the "not-allowed" cursor is shown on hover. There is a limit of 25 pages per dropdown for performance reasons and to avoid the dropdown becoming unwieldy. If the current user is allowed to add new pages under the parent page an "Add New" link is shown at the bottom of the breadcrumb dropdown. If the currently edited page has children or the user may add children, a caret at the end of the breadcrumbs reveals a dropdown of up to the first 25 children and/or an "Add New" link. Overriding the listed siblings for a page
      If you want to override the siblings that are listed in the dropdowns you can hook the BreadcrumbDropdowns::getSiblingsmethod and change the returned PageArray. For most use cases this won't be necessary.
      Incompatibilities
      This module replaces the AdminThemeUikit::renderBreadcrumbs method so will potentially be incompatible with other modules that hook the same method.
       
      https://modules.processwire.com/modules/breadcrumb-dropdowns/
      https://github.com/Toutouwai/BreadcrumbDropdowns
    • By bernhard
      Some of you might have followed the development of this module here: https://processwire.com/talk/topic/15524-previewdiscussion-rockdatatables/ . It is the successor of "RockDataTables" and requires RockFinder to get the data for the grid easily and efficiently. It uses the open source part of agGrid for grid rendering.
       
      WHY?
      ProcessWire is awesome for creating all kinds of custom backend applications, but where it is not so awesome in my opinion is when it comes to listing this data. Of course we have the built in page lister and we have ListerPro, but none of that solutions is capable of properly displaying large amounts of data, for example lists of revenues, aggregations, quick and easy sorts by the user, instant filter and those kind of features. RockGrid to the rescue 😉 
       
      Features/Highlights:
      100k+ rows Instant (client side) filter, search, sort (different sort based on data type, eg "lower/greater than" for numbers, "contains" for strings) extendable via plugins (available plugins at the moment: fullscreen, csv export, reload, batch-processing of data, column sum/statistics, row selection) all the agGrid features (cell renderers, cell styling, pagination, column grouping etc) vanilla javascript, backend and frontend support (though not all plugins are working on the frontend yet and I don't plan to support it as long as I don't need it myself)  
      Limitations:
      While there is an option to retrieve data via AJAX the actual processing of the grid (displaying, filtering, sorting) is done on the client side, meaning that you can get into troubles when handling really large datasets of several thousands of rows. agGrid should be one of the most performant grid options in the world (see the official example page with a 100k row example) and does a lot to prevent problems (such as virtual row rendering), but you should always have this limitation in mind as this is a major difference to the available lister options that do not have this limitation.
      Currently it only supports AdminThemeUikit and I don't plan to support any other admin theme.
       
      Download: https://gitlab.com/baumrock/FieldtypeRockGrid
      Installation: https://gitlab.com/baumrock/RockGrid/wikis/Installation
      Quikckstart: https://gitlab.com/baumrock/RockGrid/wikis/quickstart
      Further instructions: https://gitlab.com/baumrock/RockGrid/wikis/quickstart#further-instructions
      Changelog: https://gitlab.com/baumrock/FieldtypeRockGrid/raw/master/changelog.md
       
      Module status: alpha, License: MIT
      Note that every installation and uninstallation sends an anonymous google analytics event to my google analytics account. If you don't want that feel free to remove the appropriate lines of code before installation/uninstallation.
       
      Contribute:
      You can contribute to the development of this and other modules or just say thank you by
      testing, reporting issues and making PRs at gitlab liking this post buying me a drink: paypal.me/baumrock/5 liking my facebook page: facebook.com/baumrock hiring me for pw work: baumrock.com  
      Support: Please note that this module might not be as easy and plug&play as many other modules. It needs a good understanding of agGrid (and JavaScript in general) and it likely needs some looks into the code to get all the options. Please understand that I can not provide free support for every request here in the forum. I try to answer all questions that might also help others or that might improve the module but for individual requests I offer paid support for 60€ per hour (excl vat).
       
      Use Cases / Examples:
      Colored grid cells, Icons, Links etc. The Grid also has a "batcher" feature built in that helps communicating with the server via AJAX and managing resource intensive tasks in batches:

      Filters, PW panel links and instant reload on panel close:

      You can combine the grid with a chart library like I did with the (outdated) RockDataTables module:

    • By Ken Muldrew
      I'm trying to get a short routine to run once per day that will look at some pages and send a reminder email when that customer's subscription (yearly) is about to expire. When I run the code in a template then it works without issue, but inside my lazycron service routine, I get an "Error: Uncaught Error: Call to a member function get() on null" as if the database cannot be found. My autoload module is just the sample HelloWorld module included with ProcessWire, editted to perform this task. The whole of it is included below (I've stripped out the code that generates the email because it never gets past $pages->find):
       
      <?php namespace ProcessWire;
      /**
       * ProcessWire 'LazyCronLoad'  module
       *
       */
      class LazyCronLoad extends WireData implements Module {
          public static function getModuleInfo() {
              return array(
                  'title' => 'LazyCronLoad', 
                  'version' => 1, 
                  'summary' => 'Just loads a lazy cron callback.',
                  'singular' => true, 
                  'autoload' => true, 
                  );
          }
          public function init() {
              // initialize the hook in the AutoLoad module
              $this->addHook('LazyCron::everyDay', $this, 'myHook');
              
          }
          public function myHook(HookEvent $e) {
              // called once per day
              wire('log')->save('user_activities',' lazy cron service routine');
                  $transport_pages = $pages->find("template=aggregate-entry, aggregate_type.title='Transport'");
                  foreach ($transport_pages as $page) {
                      if (($page->purchase_date + 30325800 < time()) && ($page->purchase_date + 30412600 > time())) { // between 351 and 352 days
                          wire('log')->save('user_activities', $page->id . ' email reminder sent');
                          // send email
                  }
              }
          }        
          
      }
      The first wire('log') shows up but the second one doesn't (the purchase_date condition is met (as demonstrated by running the code in a template close in time to when the lazycron routine executes)). The error log gives the Uncaught Error shown above. 
      I think this is a beginner's mistake with something obvious being missed and would be grateful for any assistance in fixing it.