Jump to content



Recommended Posts

  • 3 weeks later...

I use WireMailSmtp and it works fine with my own code, but I receive no Email from ProcessForgotPassword module. Tested with the admin and my own frontend login without get an email. 

ProcessForgotPassword seems to use WireMail, but maybe not compatible to WireMailSmtp? 

Link to comment
Share on other sites

I use it since it exists and it works as expected. Why should it function with one wiremail call and not with another? There must be something different with those calls.

I use wiremailsmtp v 0.1.9 and processforgottpassword v 1.0.1 and all is fine.

Do you have setup the same emailadress as sender in processforgottpasswords modules config screen like the default sender in wiremailsmtp? DO you have setup a default sender in wiremailsmtp?

Do you have setup a valid emailadress with your useraccount? (without typos?)

(just thinking loud)

Edited by horst
  • Like 1
Link to comment
Share on other sites

I believe your logic is a bit flawed.  A preliminary look at ProcessForgotPassword code didn't seem to show it using the class Wiremail or the function Wiremail().  However, I could be wrong (I'm not a coder).

Edited by cstevensjr
  • Like 1
Link to comment
Share on other sites

Link to comment
Share on other sites

Config was just fine. Tested it once again and it works. Maybe typo with the username ?!

Sender address of ProcessForgotPassword is overwritten by WireMailSmtp if different, but works fine...

Sorry, should be my bad :(

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...


I have moved my site to another VPS and now I get "Error in hnsmtp::send : cannot connect to smtp-server!".

Differences in VPS: php 5.4 -> 5.6 and http->https. Can it be the issue in my case or I must dig in other place?

p.s. I can connect to smtp server in console with

#openssl s_client -crlf -connect smtp.yandex.ru:465

so it is not a firewall I guess.

Link to comment
Share on other sites

I had a similar situation a couple of months ago when I tried to upgrade my domains to PHP 5.6.x on my web host.  I never resolved this issue and ended up reverting to PHP 5.5.x

Note:  The following is what I found out by using Goggle search.  It may apply or not apply to your situation, however I hope that maybe it will cause others to chime in on possible solutions

All encrypted client streams now enable peer verification by default. By default, this will use OpenSSL's default CA bundle to verify the peer certificate. In most cases, no changes will need to be made to communicate with servers with valid SSL certificates, as distributors generally configure OpenSSL to use known good CA bundles. - OpenSSL changes in PHP 5.6.x (PHP Manual)

It appears that in PHP 5.6.0 (at least the version in Debian jessie, with openssl 1.0.1h-3), this function is now validating SSL certificates (in a variety of ways). First, it appears to fail for untrusted certificates (i.e. no matching CA trusted locally), and secondly, it appears to fail for mismatched hostnames in the request and certificate.

"PHP 5.6 now verifies SSL certificates, the "fsockopen" function fails in the "ConnectToHost" method due to mismatched certificate CN (expects host name, but IP is given instead)." -Klemen (PHP 5.6 compatibility)

The problem is that this change is resulting in an error on Email Class SMTP protocol:

fsockopen(): SSL operation failed with code 1. OpenSSL Error messages: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed

When you update to PHP 5.6+ the "CA Root" have to be set, or OpenSSL certificate verify don't work correctly.

Step One: Install CA_Root (In my case, on FreeBSD 10, via Ports)

After install, the Pem Cert will be located at:

Step Two: Add to php.ini the openssl.cafile

openssl.cafile = /usr/local/etc/ssl/cert.pem

Restart your HTTP Server, and verify with phpinfo()

References:     http://stackoverflow.com/questions/27622427/codeigniter-2x-email-class-smtp-ssl-verification-bug-on-php-5-6
  • Like 1
Link to comment
Share on other sites

@cstevensjr thanks for your answer, it point me to the right direction.

The problem is in old version of smtp class: Certificate is issued to hostname, but smtp class sends IP. In the last version it was fixed and works fine for me now on php5.6.

@horst, update smtp class, please.


  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

There seems to be something was changed with the newer smtp class that we have changed 2 weeks ago. But anyways, it seems to be fixed now.

@Pete, please can you have a look to it? I haven't changed anything on the behave of To-Recipients, only CC and BCC.

  • Like 1
Link to comment
Share on other sites

  • 2 months later...
  • 2 weeks later...

I can't believe I've not thanked you Horst for this module. I've been using it for about a year, linked to Mandrill, a match made in heaven ^_^ and no false-positive spam rejected emails.

Thank you again, cheers, -Alan.

  • Like 1
Link to comment
Share on other sites

having some trouble with CC, i'm supplying an array, like this:


and i know my array is good, and CC works for 1 CC (I have $mail->sendSingle(true); )

but it will only CC the last member of the array, no matter which array type i input.


OK - forget this, i just updated to the latest version and this was fixed...

Link to comment
Share on other sites

  • 1 month later...

First time using this module and I get this error:

"it is not supported any of the authentication mechanisms required by the server"

The SMTP server is an open relay restricted by sender IP, no authentication required.

I have tested using PHPMailer succesfully.

Any ideas?

Link to comment
Share on other sites

First time using this module and I get this error:

"it is not supported any of the authentication mechanisms required by the server"

The SMTP server is an open relay restricted by sender IP, no authentication required.

I have tested using PHPMailer succesfully.

Any ideas?

Can you please provide some information regarding your setup for this website (versions of PHP/ProcessWire, type of hosting used, the hosting provider/or whether local hosted)?  Have you followed the instructions from your hosting provider regarding SMTP setup details, if not locally hosted?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Similar Content

    • By monollonom
      Github: https://github.com/romaincazier/PageMjmlToHtml
      Modules directory: https://processwire.com/modules/page-mjml-to-html/
      A module allowing you to write your Processwire template using MJML and get a converted HTML output using MJML API.
      This is considered to be in alpha and as such needs some testing before being used in production!

      Created by Mailjet, MJML is a markup language making it a breeze to create newsletters displayed consistently across all email clients.
      Write your template using MJML combined with Processwire’s API and this module will automatically convert your code into a working newsletter thanks to their free-to-use Rest API.
      For this module to work you will need to get an API key and paste it in the module’s configuration.
      Once your credentials are validated, select the template(s) in which you’re using the MJML syntax, save and go visualize your page(s) to see if everything’s good. You will either get error/warning messages or your email properly formatted and ready-to-go.
      From there you can copy/paste the raw generated code in an external mailing service or distribute your newsletter using ProMailer.
      The MJML output is cached to avoid repetitive API calls Not cached if there are errors/warnings Cleared if the page is saved Cleared if the template file has been modified A simple (dumb?) code viewer highlights lines with errors/warnings A button is added to quickly copy the raw code of the generated newsletter Not added if the page is rendered outside of a PageView Only visible to users with the page’s edit permission A shortcut is also added under “View” in the edit page to open the raw code in a new tab Multi-languages support
      The code viewer is only shown to superusers. If there’s an error the page will display:
      Only its title for guests Its title and a message inviting to contact the administrator for editors If you are using the markup regions output strategy, it might be best to not append files to preserve your MJML markup before calling the MJML API. This option is available in the module’s settings.
    • By Marco Ro
      Hi guys!
      I'm a bit anxious because this is the first module I present! (beta modulo) But I will finally be able to share something with the community too! :)
      This is a BETA version of the PayPal payment system called: PayPal Commerce Platform.
      It is an advanced system (Business Pro account is needed) that brings various benefits in terms of fees and above all integrates direct payment with credit/debit cards. 
      The module integrates with Padloper 0.0.2, which is the current installation I'm using.
      This system integrates the classic PayPal buy button, the alternative or local payment method and the new payment system: credit/debit cards that doesn't go through the PayPal account. It is a Stripe-style payment, it connects directly with the bank and integrates 3D security validation.
      I say that it is a BETA because this module currently only works with Sandbox account, to put it live you need to change API url manually (manually for the moment).
      Because this module is not ready for live:
      I would like to have your opinion on how I built the module (is the first one I do). I don't want to share something that is not fish but I need a comparison with someone more experienced than me, for be sure that this is the best way to code the module.
      If you want to try this I created a git, you will find all the instructions for installation and correct operation. (Git has a MIT licensed)
      https://github.com/MarcooRo/processwire-PayPal-Commerce-Platform I hope I did something that you guys can like :)
    • By monollonom
      (once again I was surprised to see a work of mine pop up in the newsletter, this time without even listing the module on PW modules website 😅. Thx @teppo !)
      Github: https://github.com/romaincazier/FieldtypeQRCode
      Modules directory: https://processwire.com/modules/fieldtype-qrcode/
      A simple fieldtype generating a QR Code from the public URL of the page, and more.
      Using the PHP library QR Code Generator by Kazuhiko Arase.

      In the field’s Details tab you can change between .gif or .svg formats. If you select .svg you will have the option to directly output the markup instead of a base64 image. SVG is the default.
      You can also change what is used to generate the QR code and even have several sources. The accepted sources (separated by a comma) are: httpUrl, editUrl, or the name of any text/URL/file/image field.
      If LanguageSupport is installed the compatible sources (httpUrl, text field, ...) will return as many QR codes as there are languages. Note however that when outputting on the front-end, only the languages visible to the user will be generated.
      Unformatted value
      When using $page->getUnformatted("qrcode_field") it returns an array with the following structure:
      [ [ "label" => string, // label used in the admin "qr" => string, // the qrcode image "source" => string, // the source, as defined in the configuration "text" => string // and the text used to generate the qrcode ], ... ] Formatted value
      The formatted value is an <img>/<svg> (or several right next to each other). There is no other markup.
      Should you need the same markup as in the admin you could use:
      $field = $fields->get("qrcode_field"); $field->type->markupValue($page, $field, $page->getUnformatted("qrcode_field")); But it’s a bit cumbersome, plus you need to import the FieldtypeQRCode's css/js. Best is to make your own markup using the unformatted value.
      Static QR code generator
      You can call FieldtypeQRCode::generateQRCode to generate any QR code you want. Its arguments are:
      string $text bool $svg Generate the QR code as svg instead of gif ? (default=true) bool $markup If svg, output its markup instead of a base64 ? (default=false) Hooks
      Please have a look at the source code for more details about the hookable functions.
      $wire->addHookAfter("FieldtypeQRCode::getQRText", function($event) { $page = $event->arguments("page"); $event->return = $page->title; // or could be: $event->return = "Your custom text"; }) $wire->addHookAfter("FieldtypeQRCode::generateQRCodes", function($event) { $qrcodes = $event->return; // keep everything except the QR codes generated from editUrl foreach($qrcodes as $key => &$qrcode) { if($qrcode["source"] === "editUrl") { unset($qrcodes[$key]); } } unset($qrcode); $event->return = $qrcodes; })
    • By Sebi
      AppApiFile adds the /file endpoint to the AppApi routes definition. Makes it possible to query files via the api. 
      This module relies on the base module AppApi, which must be installed before AppApiFile can do its work.
      You can access all files that are uploaded at any ProcessWire page. Call api/file/route/in/pagetree?file=test.jpg to access a page via its route in the page tree. Alternatively you can call api/file/4242?file=test.jpg (e.g.,) to access a page by its id. The module will make sure that the page is accessible by the active user.
      The GET-param "file" defines the basename of the file which you want to get.
      The following GET-params (optional) can be used to manipulate an image:
      width height maxwidth maxheight cropX cropY Use GET-Param format=base64 to receive the file in base64 format.
    • By MarkE
      This fieldtype and inputfield bundle was built for storing measurement values within a field, rendering them in a variety of formats and converting them to other units or otherwise modifying them via the API.
      The API consists of a number of predefined functions, some of which include...
      render() for rendering the measurement object, valueAs() for converting the value to another unit value, convertTo() for converting the whole measurement object to different units, and add() and subtract() for for modifying the stored value by the value (converted as required) in another measurement. In the admin the inputfield includes a checkbox (which can be optionally disabled) for converting values on page save. For an example if a value was typed in as centimeters, the unit was changed to metres, and the page saved with this checkbox selected, said value would be automatically converted so that e.g. 170 cm becomes 1.7 m.

      A simple length field using Fieldtype Measurement and Inputfield Measurement.
      Combination units (e.g. feet and inches) are also supported.
      Please note that this module is 'proof of concept' at the moment - there are limited units available and quite a lot of code tidying to do. More units will be added shortly.
      See the GitHub at https://github.com/MetaTunes/FieldtypeMeasurement for full details and updates.
  • Create New...