Jump to content

WireMailSmtp


horst

Recommended Posts

On 5/29/2018 at 2:57 PM, ethanbeyer said:

@Jon this sounds a little strange. Reading most of your comment, I would think that this might have something to do with your Office365 having sending limits that you're going over. The TLS issue is what makes it weird, though - because if it was a limits problem, that would not be happening.

Is there anything in the logs that gives what error is encountered, rather than saying it just stops sending?

Hello Ethan,

Nothing in the logs I've now setup sendinblue and this has resolved the issues so I assumes its 365 like you suggested. The limit would be odd though as its not sending out that many emails

Cheers

Jon

Link to comment
Share on other sites

  • 2 weeks later...
  • 7 months later...

We are getting the "WireMailSmtpConfig: ERROR: SMTP settings did not work" error with these settings (real address replaced with ***). 

Local hostname: www.***.com
SMTP Hostname: ***.mail.protection.outlook.com
SMTP Port: 25
SMTP User: (required to be left empty)
SMTP Password: (required to be left empty)
Use START-TLS: Yes

Authentication is made using something called O365 (assuming it means Office 365). Could this be the reason nothing works? Does WireMail: SMTP even work with user and password left empty?

What does the Authentication Mechanism stand for? An IP address?

In the front end when trying to submit from by Formbuilder I get "Notice: Undefined index: replyToName in ***.com/httpdocs/wire/core/WireMail.php on line 319

Link to comment
Share on other sites

1 hour ago, MSP01 said:

Authentication is taken care of by something else in this case.

Based on what you have provided so far, here are some links that may or may not help you with your situation:

https://www.fastmail.com/help/technical/ssltlsstarttls.html

https://www.limilabs.com/blog/ssl-vs-tls-vs-starttls-stls

https://www.sparkpost.com/resources/email-explained/ssl-tls-starttls-encyption/

 

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

I am having trouble setting this module up on the client's webspace. 

Locally it works like charme with the given data (as seen here - only in German: https://www.ionos.de/hilfe/e-mail-office/allgemeine-themen/einstellungen-fuer-ihr-e-mail-programm/)

Locally I use SSL via port 465 (host: smtp.ionos.de)

After copying the whole processwire installation to the clients webspace I updated the hostname but then out of the sudden the SMTP server isn't reachable anymore via SSL (nor TLS). Only unecrypted connections are working. Is there anything obvious I am missing? 

Thanks a lot for your support!

 

Link to comment
Share on other sites

Is hosting provided by 1&1 as well?

If so... you could ask their support if you have to use another server/port or whatever in that case.

Have you tried another mail service like Gmail? Does that work?

If so... 1&1 might have the right answer.
if not... there is another problem.

What's the complete error message WireMailSmtp shows?

  • Like 1
Link to comment
Share on other sites

On 2/25/2019 at 9:22 PM, wbmnfktr said:

Is hosting provided by 1&1 as well?

If so... you could ask their support if you have to use another server/port or whatever in that case.

Have you tried another mail service like Gmail? Does that work?

If so... 1&1 might have the right answer.
if not... there is another problem.

What's the complete error message WireMailSmtp shows?

Yes, the site is also hosted on 1&1. 

 

And no, also gmail does not work. So proabably something wrong with 1und1. Will ask the support. 

Error message is

Quote

ERROR: SMTP settings did not work. +1
could not connect to the host "smtp.ionos.de": Connection timed out

 

Thanks for pointing me to the obvious things 😉

Link to comment
Share on other sites

  • 4 weeks later...

Hi Horst,

would it be possible to implement a feature that overwrites the configuration variables (server, password...) from a config or .env File?
We've got several sites that do auto-deployments to different servers based on the git branch that is used. Currently, when deploying the local development version to a staging system we're copying the dev database and need to adjust the settings by "hand" (we've written a script for that). Having a file based configuration would make it possible to just dump a file on the server and save the config variables in it.

  • Like 1
Link to comment
Share on other sites

54 minutes ago, felix said:

Hi Horst,

would it be possible to implement a feature that overwrites the configuration variables (server, password...) from a config or .env File?
We've got several sites that do auto-deployments to different servers based on the git branch that is used. Currently, when deploying the local development version to a staging system we're copying the dev database and need to adjust the settings by "hand" (we've wrote a script for that). Having a file based configuration would make it possible to just dump a file on the server and save the config variables in it.

Just in case it's helpful, this is what I do for Tracy - anything that is defined in the $config->tracy() array overwrites the settings stored in the DB.

https://github.com/adrianbj/TracyDebugger/blob/3f1fb2cf0016b8b27cc1019f47e58bce8e2cbd3d/TracyDebugger.module.php#L322-L325

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

14 hours ago, felix said:

would it be possible to implement a feature that overwrites the configuration variables (server, password...) from a config or .env File?

Hi @felix, I don't want to enable plain text files with server & password settings, but going with the already needed and available site/config.php, as @adrian suggested, seems to be fine. (As it already stores the DB-credentials).

I try to look into it and implement it this weekend. I think this can be useful for a lot of us.

  • Like 3
Link to comment
Share on other sites

Announcement:

I've created a new branch on github with the requested feature by @felix. Please can you and / or anybody else try this out and give some feedback. If everything is working as expected, I will push this to the master branch.

Short introduction:

You can specify how many and what ever params you want into an array that is called $config->wirmailsmtp. Every valid key of this array will override the key of the stored modules config setting.

// example entry in site/config.php

$config->wiremailsmtp = array(
    "smtp_host"                => "smtp.example.com",
    "smtp_port"                => 587,
    "smtp_ssl"                 => 0,
    "smtp_start_tls"           => 1,
    "smtp_user"                => "yourusersname",
    "smtp_password"            => "youruserspassword",
    "extra_headers"            => array("Organization" => "Horst Nogajski - Fotografie & Webdesign", "X-Header" => "Some Content")
);

To see your resulting (merged) settings you can var_dump the output of the method getSettings():

// debug example in a template file

$mail = wireMail();
echo "<pre>";
var_dump($mail->getSettings());

wiremailsmtp-config-override.png.6fa9a907d37c147f41333cc1add60864.png

I tested it here myself and it seems to work fine.

 

EDIT:

I forgott to mention that I removed the required flags from the modules config settings for smtp_host and smtp_port.
This way, both settings now may stay empty in the config screen, but can be set via the $config->wiremailsmtp array. The downside would be that the modules config screen isn't that robust anymore in regard of misconfiguration.

Is this acceptable, or should there also be a required setting in the modules config screen? This is open for discussion. 🙂

 

Edited by horst
EDIT
  • Like 6
Link to comment
Share on other sites

  • 3 weeks later...

Hi @horst

I just wanted to draw attention to a problem that might affect some in the future if TLS (or STARTTLS) is used.

I wasn't sure where to put my concerns, so I decided to write them down in the support forum. 

Some email hosting providers will shut down TLS 1.0 support in the future (or already did so). The way your module currently relies on the SMTP class (when using PHP version >= 5.6.7) it only (and exclusively) supports TLS version 1.0 (see here https://github.com/horst-n/WireMailSmtp/blob/master/smtp_classes/smtp.php#L1295).

The issue is better described by one comment on the PHP forum: https://www.php.net/manual/en/function.stream-socket-enable-crypto.php#119122.

Can you maybe integrate an option to allow specifying one of the available PHP crypto type constants?

Hopefully I don't bother you with this and maybe it is useful for somebody.

Thank you for your work in any case!

 

  • Like 1
Link to comment
Share on other sites

We'd like to send email from WireMailSMTP using G Suite. Google offers three different options:

https://support.google.com/a/answer/176600?hl=en

We've tried every variant we can, without success. For anyone using G Suite, which Google option works for you? What settings have you used in G Suite admin, and which settings have you used in the WireMailSMTP config?

(We have enabled the "allow less secure apps" option, and are not using 2-factor authentication.)

Your help is much appreciated.

 

Link to comment
Share on other sites

6 hours ago, chcs said:

We'd like to send email from WireMailSMTP using G Suite. Google offers three different options:

https://support.google.com/a/answer/176600?hl=en

We've tried every variant we can, without success. For anyone using G Suite, which Google option works for you? What settings have you used in G Suite admin, and which settings have you used in the WireMailSMTP config?

(We have enabled the "allow less secure apps" option, and are not using 2-factor authentication.)

Your help is much appreciated.

 

This has been resolved. The issue was with the WHM firewall.

  • Like 1
Link to comment
Share on other sites

On 4/18/2019 at 2:36 PM, androbey said:

Can you maybe integrate an option to allow specifying one of the available PHP crypto type constants?

Hi @androbey,

I have created a dev-branch on github with the requested functionality. Please can you try it out and give some feedback?
   https://github.com/horst-n/WireMailSmtp/tree/5600cb0230531327438d6a333b2c8a3eb29cc08d

There is also a new $mail->debugSend() method available that you can use instead of the regular $mail->send() method.
With calling the debugSend() method in a template file you will get detailed log information like this:

C STARTTLS
S 220 2.0.0 Ready to start TLS
Starting TLS cryptographic protocol
TLS started: STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT

 

Spoiler

Resolving SMTP server domain "www.example.com"...
Connecting to SMTP server "www.example.com" port 587...
Connected to SMTP server "www.example.com".
S 220 www.example.com ESMTP
C EHLO wiremailsmtp.kawobi.local
S 250-www.example.com
S 250-PIPELINING
S 250-SIZE 102400000
S 250-VRFY
S 250-ETRN
S 250-STARTTLS
S 250-AUTH PLAIN LOGIN
S 250-AUTH=PLAIN LOGIN
S 250-ENHANCEDSTATUSCODES
S 250-8BITMIME
S 250 DSN
C STARTTLS
S 220 2.0.0 Ready to start TLS
Starting TLS cryptographic protocol
TLS started: STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT
C EHLO wiremailsmtp.kawobi.local
S 250-www.example.com
S 250-PIPELINING
S 250-SIZE 102400000
S 250-VRFY
S 250-ETRN
S 250-AUTH PLAIN LOGIN
S 250-AUTH=PLAIN LOGIN
S 250-ENHANCEDSTATUSCODES
S 250-8BITMIME
S 250 DSN
C AUTH PLAIN bTAxZTY5ZWIAbTAxZTY5ZWIARU1zaVdnc3VzMUVoZXBNdTI=
S 235 2.7.0 Authentication successful
C MAIL FROM:<info@nogajski.de>
C RCPT TO:<info@nogajski.de>
C DATA
S 250 2.1.0 Ok
S 250 2.1.5 Ok
S 354 End data with <CR><LF>.<CR><LF>
C To:  <info@nogajski.de>
Subject: Wiremail-SMTP Test 18:50:39 =?UTF-8?q?=C3=A4=C3=B6=C3=BC_=C3=84=C3=96=C3=9C_=C3=9F?=
From: LocalTestmail <info@nogajski.de>
Return-Path: info@nogajski.de
Reply-To:  <info@nogajski.de>
Organization: Horst Nogajski - Fotografie & Webdesign
X-Mailer: ProcessWire/WireMailSmtp
Date: Fri, 19 Apr 2019 16:50:40 GMT
MIME-Version: 1.0
Content-Type: multipart/alternative; boundary="d9f4656ffd3ae4b2a17b6891ed0a92ad"
Message-ID: <20190419185040.2103.relay@nogajski.de>
C --d9f4656ffd3ae4b2a17b6891ed0a92ad
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Titel=0A=0Atext text TEXT text text=0A
--d9f4656ffd3ae4b2a17b6891ed0a92ad
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<h1>Titel</h1><p>text text <strong>TEXT</strong> text text</p>
--d9f4656ffd3ae4b2a17b6891ed0a92ad--
C 
.
S 250 2.0.0 Ok: queued as 4CDD02C0143E
C QUIT
S 221 2.0.0 Bye
Disconnected.

 

  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kixe
      Field that stores one or more references to ProcessWire pages with additional data in field context.
      Values are editable via page edit modal of the referenced page provided from the field if module AdminPageFieldEditLinks is installed and "Enable link to create new pages?" is checked in field settings.
      Requirements: AdminPageFieldEditLinks >= 3.1.4
      https://github.com/kixe/FieldtypePageContextData
      https://processwire.com/modules/fieldtype-page-context-data/
      Use case example:
      The planning of the Tonmeistertagung in the CCD (Congress Center Düsseldorf) from November 3rd, 2021 to November 6th, 2021 is in the finalization phase.
      The conference consists of a conference part and an exhibition. The planning is done via a separate frontendless PW instance. There, all companies (pages) that are active at various events are kept in a pool. Changes (address, logo) can always be done there. For the exhibition of the current conference in November, the exhibitor-companies (pages) are selected via a page reference field. A stand number must now be assigned to each selected company (page). We had originally solved this using the Profield FieldtypeTable. However, this had the disadvantage that each entry again made all companies available for selection and did not recognize which were already selected in a previous table row. The new field type now allows the value (company's stand number) to be assigned to a Company (page) in context to a specific Pagefield living in a specific page.
      https://tonmeistertagung.com/en/exhibitors/exhibition/
       
    • By Robin S
      This module lets you add some custom menu items to the main admin menu, and you can set the dropdown links dynamically in a hook if needed.
      Sidenote: the module config uses some repeatable/sortable rows for the child link settings, similar to the ProFields Table interface. The data gets saved as JSON in a hidden textarea field. Might be interesting to other module developers?
      Custom Admin Menus
      Adds up to three custom menu items with optional dropdowns to the main admin menu.
      The menu items can link to admin pages, front-end pages, or pages on external websites.
      The links can be set to open in a new browser tab, and child links in the dropdown can be given an icon.
      Requires ProcessWire v3.0.178 or newer.
      Screenshots
      Example of menu items

      Module config for the menus

      Link list shown when parent menu item is not given a URL

      Advanced
      Setting child menu items dynamically
      If needed you can set the child menu items dynamically using a hook.
      Example:
      $wire->addHookAfter('CustomAdminMenus::getMenuChildren', function(HookEvent $event) { // The menu number is the first argument $menu_number = $event->arguments(0); if($menu_number === 1) { $colours = $event->wire()->pages->findRaw('template=colour', ['title', 'url', 'page_icon']); $children = []; foreach($colours as $colour) { // Each child item should be an array with the following keys $children[] = [ 'icon' => $colour['page_icon'], 'label' => $colour['title'], 'url' => $colour['url'], 'newtab' => false, ]; } $event->return = $children; } }); Create multiple levels of flyout menus
      It's also possible to create multiple levels of flyout submenus using a hook.

      For each level a submenu can be defined in a "children" item. Example:
      $wire->addHookAfter('CustomAdminMenus::getMenuChildren', function(HookEvent $event) { // The menu number is the first argument $menu_number = $event->arguments(0); if($menu_number === 1) { $children = [ [ 'icon' => 'adjust', 'label' => 'One', 'url' => '/one/', 'newtab' => false, ], [ 'icon' => 'anchor', 'label' => 'Two', 'url' => '/two/', 'newtab' => false, 'children' => [ [ 'icon' => 'child', 'label' => 'Red', 'url' => '/red/', 'newtab' => false, ], [ 'icon' => 'bullhorn', 'label' => 'Green', 'url' => '/green/', 'newtab' => false, 'children' => [ [ 'icon' => 'wifi', 'label' => 'Small', 'url' => '/small/', 'newtab' => true, ], [ 'icon' => 'codepen', 'label' => 'Medium', 'url' => '/medium/', 'newtab' => false, ], [ 'icon' => 'cogs', 'label' => 'Large', 'url' => '/large/', 'newtab' => false, ], ] ], [ 'icon' => 'futbol-o', 'label' => 'Blue', 'url' => '/blue/', 'newtab' => true, ], ] ], [ 'icon' => 'hand-o-left', 'label' => 'Three', 'url' => '/three/', 'newtab' => false, ], ]; $event->return = $children; } }); Showing/hiding menus according to user role
      You can determine which menu items can be seen by a role by checking the user's role in the hook.
      For example, if a user has or lacks a role you could include different child menu items in the hook return value. Or if you want to conditionally hide a custom menu altogether you can set the return value to false. Example:
      $wire->addHookAfter('CustomAdminMenus::getMenuChildren', function(HookEvent $event) { // The menu number is the first argument $menu_number = $event->arguments(0); $user = $event->wire()->user; // For custom menu number 1... if($menu_number === 1) { // ...if user does not have some particular role... if(!$user->hasRole('foo')) { // ...do not show the menu $event->return = false; } } });  
      https://github.com/Toutouwai/CustomAdminMenus
      https://processwire.com/modules/custom-admin-menus/
    • By tcnet
      This module for ProcessWire sends a notification email for each failed login attempt. Similar modules exists already in the module directory of ProcessWire. However, this module is designed to notify, even if specified user doesn't exist.
      Settings
      The settings for this module are located in the menu Modules=>Configure=>LoginFailNotifier.
      Notification email
      Specifies the email address to which the notification emails should be sent.
        Email subject
      Specifies the subject line for the notification email.
        Post variables
      Specifies the $_POST variables to be included in the notification email. Each variable must be separated by a comma. For example: login_name,login_pass
        Server variables
      Specifies the $_SERVER variables to be included in the notification email. Each variable must be separated by a comma. For example: REMOTE_ADDR,HTTP_USER_AGENT
      Link to ProcessWire module directory:
      https://processwire.com/modules/login-fail-notifier/
      Link to github.com:
      https://github.com/techcnet/LoginFailNotifier
    • By Fokke
      ProcessWire 3.x markup module for rendering meta tags in HTML document head section. Note that this module is not a full-blown SEO solution, but rather a simple tool for rendering meta tags based on module configuration. Adding custom meta tags is also supported.
      Built-in meta tags
      The following meta tags are supported out-of-the-box:
      Document title consisting of page title and site name Character set Canonical Viewport Description Keywords Hreflang tags Open Graph og:title og:site_name og:type og:url og:description og:image og:image:width og:image:height Twitter meta tags twitter:card twitter:site twitter:creator twitter:title twitter:description twitter:image Facebook meta tags fb:app_id The full documentation with configurable options can be found here: https://github.com/Fokke-/MarkupMetadata
       
      Requirements:
      ProcessWire>=3.0.0 PHP >=7.1 Installation using Composer
      composer require fokke/markup-metadata Manual installation
      Download latest version from https://github.com/Fokke-/MarkupMetadata/archive/master.zip Extract module files to site/modules/MarkupMetadata directory.
    • By m.sieber
      ITRK-Service for ProcessWire
      Module for the automated transfer of imprint, data protection declaration and terms and conditions from IT-Recht Kanzlei to your ProcessWire installation
      What is ITRK Service for ProcessWire?
      ITRK-Service for ProcessWire is a free module for ProcessWire CMS. It provides an interface to the update service of IT-Recht Kanzlei, via which the legal texts of your online presence are automatically updated. In this way, the texts remain legally secure and warning-proof in the long term. Imprint, data protection declaration, revocation and general terms and conditions are currently supported.
      You can find our documentation (in german language) here: https://www.pupit.de/itrk-service-for-processwire/dokumentation/

      Download: https://www.pupit.de/itrk-service-for-processwire/
      Github: https://github.com/pupit-de/pwItrkServiceConnector
×
×
  • Create New...