adrian

Page Field Select Creator

Recommended Posts

This module provides a way to rapidly generate Page fields and the required templates and pages for use as a drop down select (or any other Page field type).

This module will let you create a full page field setup in literally a few seconds  :)

To use, run Page Field Select Creator from the Setup Menu

  • Enter a Field Title, eg: Room Types
  • Select Options - These will become the child pages that will populate the page field select options. There are two different options.
     
    Option 1. TITLE FIELD ONLY - enter one option per line, eg:
     
    Single
    Double
    Suite
     
     
    Option 2. MULTIPLE FIELDS - the first line is used for the field names and the first field must be 'Title'. Subsequent lines are the values for the fields, eg:
     
    Title, Number of Beds, Number of People, Kitchen Facilities
    Single, 1, 1, Fridge Only
    Double, 2, 2, Fridge Only
    Suite, 3, 6, Full Kitchen
     
  • Choose the parent where the page tree of options will be created, eg a hidden "Options" parent page
  • Select a "Deference in API as" option depending on your needs
  • Choose the input field type
  • Check whether "Allow new pages to be created from field?" should be enabled.

As an example, if you entered "Room Types" as the field title, you would end up with all of the following automatically created:

  • a fully configured page field called: room_types
  • MULTIPLE FIELDS OPTION - 3 additional fields - number_of_beds, number_of_people, kitchen
  • a parent template called: room_types
  • a child template called: room_types_items (with either just a title field, or with the 3 additional fields as well)
  • a parent page called: Room Types
  • a series of child pages named and titled based on the per line entries in the Select Options textarea

The templates are configured such that the "room_types_items" child template can only have the main "room_types" template as a parent, and vice versa.

Then all you have to do is add the newly created page field to any template you want and you're ready to go!
 
You can grab it from:
 
Modules directory: http://mods.pw/5R
Github: https://github.com/adrianbj/ProcessPageFieldSelectCreator

I'd appreciate some feedback on whether others would find this useful, and if you agree with the default way the template structure and family settings are being configured. Then I'll add to the modules directory.

post-985-0-49927700-1379441662_thumb.png

  • Like 18

Share this post


Link to post
Share on other sites

This is great Adrian, extremely handy!

As this is a more advantaged tool I was thinking of:

Select a template to use as child page ( with more fields in a template )

Say you select a child template with the fields: title, type & year.

Then at Select Options:

BMW, m3, 1987

Mazda, 323, 1986

VW, Golf, 2012

---

Even without this it's a real time saver !!!

  • Like 1

Share this post


Link to post
Share on other sites

Greetings,
Excellent concept! I just experimented with it briefly this morning. Will use it more later...

One of the most common newcomer misunderstandings about ProcssWire is the "missing" dropdown field. Your module gets us closer to using the depth of ProcessWire pages as selects while being easier to set up.

Thanks for doing this!

Matthew

  • Like 1

Share this post


Link to post
Share on other sites

Thanks for the positive feedback everyone. 

Matthew - that was definitely part of my reasoning for creating this. There are a few times I have wanted to set up a page field, but have gone with hani's fieldtype Select module to save time. I still think there are times when his module is more appropriate, but now I think I won't be making the decision because of the time/hassle of creating a page field setup. It is also why I chose to put "Select" in the name of the module - hopefully it will help newcomers find it more easily.

Martijn - I like where you are headed with those ideas. I think rather than selecting an existing child template (which I think is what you are suggesting), how about I allow the Select Options field to also handle multiple fields if entered? I might take a stab at that and see how it goes - stay tuned!

  • Like 3

Share this post


Link to post
Share on other sites

<adrian>how about I allow the Select Options field to also handle multiple fields if entered? I might take a stab at that and see how it goes - stay tuned!</adrian>

I didn't thought about that, but thats even better, thumbs up !

  • Thanks 1

Share this post


Link to post
Share on other sites
Hi everyone.

The new functionality based on Martijn's suggestions for creating the select options with multiple fields is ready. I have updated the code on Github and modified the instructions in the first post above.

Please test and let me know how it goes for you and whether there are any improvements I could make.

  • Like 4

Share this post


Link to post
Share on other sites

Adrian, thanks for the update! If possible, it would have been nice to have a before (original version) and after this update text and screenshots (I know could potentially lead to a long thread and not practical with every update). It helps to compare, follow progress, etc. Not a big deal though... ;)

Share this post


Link to post
Share on other sites

Adrian I think you broke something in your latest commit.

In the option with multiple fields

The pagefield, doesn't store the Parent Page.

ps, I'm smiling while using this Module  :) 

(aside: People have to take care they're not creating a Hani amount of fields )

  • Like 1

Share this post


Link to post
Share on other sites

Works ! 

$field->notes at Select Options contain a lot of text. Maybe move the to $field->desc.

And use the $field->notes to echo out all compatible text based fields.

ps, your implementation of my suggestion is way better then how I thought about it.

Share this post


Link to post
Share on other sites

Glad to hear it's working again!

I don't mind moving the examples for the Select Options field to the desc, but I am actually not sure what you mean by:

"echo out all compatible text based fields"

Do you mean all existing text fields from the entire site? I am not sure what would make them compatible or not.

Remember that any new specified fields are created on the fly and added to the child template's fieldgroup - there is no need to have those fields already defined.

Sorry, I think I am just not understanding what you mean :)

Share this post


Link to post
Share on other sites

<adrian>Do you mean all existing text fields from the entire site? I am not sure what would make them compatible or not</adrian>

Yep that is what I meant.

Reuse of existing fields makes sense, so it would be nice to see a list of all fields that extends from FieldtypeText. ( all compatible I think )

Share this post


Link to post
Share on other sites

Good point - v4 is now available and includes a list of available text fields that can be used instead of automatically creating new ones if appropriate.

  • Like 1

Share this post


Link to post
Share on other sites

Wil test tomorrow, thanks for all your effort!

Did the testings this morning... simply love it.

Thanks for bringing in my ideas !

Edited by Martijn Geerts
  • Like 2

Share this post


Link to post
Share on other sites

Hey, no worries - I was going to be working on another new module today, but may as well get this one perfected first :)

What exactly do you think it needs and how do you see it working? I have played around with multi languages in PW a little, but since I don't really have a need, I am still not terribly literate with it yet.

Am I correct in assuming that you wouldn't really need multi-language versions of the title of the Parent page? I am thinking you'd only need them for all fields of the child pages?

So, would having separate "Select Options" textarea fields for each installed language cover everything needed?

It would be great if you could detail out how you think it would work best so I don't go down a confusing path!

Sorry for being an ignorant English speaker :)

PS Go grab v6 from Github - some restructuring of the form - layout and instructions, fixing of a bug if the field already existed, and more friendly error reporting in general.

Edited by adrian
  • Like 1

Share this post


Link to post
Share on other sites

All strings can be translated in PW.

It is as easy as. $this->_("provide your english here") or __("provide your english here") instead of "provide your english here"

Then If someone needs to translate your module the translatable strings are in there. 

  1. The translator should go to /Setup/Languages/ 
  2. Then to the language, say Dutch.
  3. There fill in the path of your module
  4. ProcessWire will detect all __('translatable strings') & $this->_('translatable strings') and present the translator with inputs.
  5. Then The translator can type in "vertaalbare tekst" go to the next, etc. translate them all.
  6. Save... Done

$field->description = __("Fringilla Sollicitudin Consectetur"); or $field->description = _$this->_("Fringilla Sollicitudin Consectetur");

To make it more fancy, use the sprintf or printf

printf(__("Created %d pages."), $count);


example

protected function buildForm1() {
  $f = $this->modules->get("InputfieldText");
  $f->name = 'fieldTitle';
  $f->label = __('Field Title');
  $f->required = true;
  $f->description = __("The title of the page field to be created.");
  $f->notes = __("Use capitals, spaces etc.");
  $form->add($f);
  .....
}
  • Like 2

Share this post


Link to post
Share on other sites

Ok, now I understand - I wasn't thinking about making the module's form translatable. I thought you meant having the option for creating the selectable child pages have multi-language fields.

Thanks a lot for the detailed example - I'll take care of it now and hopefully you can let me know if I have missed anything. Should/can the name of the module itself be translatable?

Share this post


Link to post
Share on other sites

Just a little note to the translations:

If you're in a class context (extending Wire), the way to translate strings is like this: 

$this->_('Your string to translate');

Whereas in templates, there's the following syntax to use:

__('Translate me baby');

Great module :)

  • Like 1

Share this post


Link to post
Share on other sites

OK, v7 now has translations support!

Wanze - thanks for the translation info. I had just finished when your message came through. Everything seems to be working fine. Maybe you could take a look for me and let me know if I need to change any of them.

One other question for you guys - wasn't quite sure the best way to handle multiline description fields. In the case of the "Select Options" field, I think I may have made the translation more complicated than it really needs to be. Perhaps it would be better to put all in one translatable field and require the translator to include these as required. Trouble is that the title and description on the translation page don't get formatted, so it is hard to see what the intended layout actually is. Do you have any advice?

Anything I missed?

Share this post


Link to post
Share on other sites

Hey guys,

I have been playing around trying to better understand multi-language stuff and it seems to me that along with the module translation that I just set up, it would also make sense to be able to automatically fill in the alternate language(s) for the fields of the sub-pages - in my example, the values for: Title, Number of Beds, Number of People, Kitchen Facilities.

So, if you had three languages installed you'd be given three "Select Options" fields, one for each language. Based on my standard example, you'd fill out something like this:

English

Title, Number of Beds, Number of People, Kitchen Facilities

Single, 1, 1, Fridge Only

Double, 2, 2, Fridge Only

Suite, 3, 6, Full Kitchen

Dutch

Titel, aantal bedden, aantal personen, ingerichte keuken

Alleenstaand, 1, 1, Koelkast Alleen
Dubbel, 2, 2, Alleen Koelkast

Vervolg, 3, 6, volledige keuken

German

Titel, Anzahl der Betten, Anzahl von Menschen, Küchen

Einzel, 1, 1, Kühlschrank Nur

Doppel, 2, 2, Kühlschrank Nur

Weiterführung, 3, 6, komplett ausgestattete Küche

Would this be useful, or is this not how you guys handle things for the content pages for a Page field.

PS Excuse the dodgy google translations - no offense intended :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By BitPoet
      MediaLibrary
      Update: MediaLibrary can now be found in the official module list.
      Out of necessity, I've started to implement a simple media library module.
      The basic mechanism is that it adds a MediaLibrary template with file and image fields. Pages of this type can be added anywhere in the page tree.
      The link and image pickers in CKEditor are extended to allow quick selection of library pages from dropdowns. In the link picker this happens in the MediaLibrary tab, where you can also see a preview of the selected image. In the image picker, simply select a library from the dropdown at the top, everything else is handled by standard functionality.
      I've put the code onto github. This module is compatible with ProcessWire 3.
      Steps to usage:
      Download the module's zip from github (switch to the pw3 branche beforehand if you want to test on PW 3.x) and unpack it into site/modules Click "Modules" -> "Refresh" in the admin Click "Install" for MediaLibrary For testing, create a page with the MediaLibrary template under home (give it an expressive title like 'Global Media') and add some images and files Edit a differnt page with a CKEditor field and add a link and an image to see the MediaLibrary features in action (see the screencap for details) Optionally, go into the module settings for MediaLibrary Note: this module is far from being as elaborate as Kongondo's Media Manager (and doesn't plan to be). If you need a feature-rich solution for integrated media management, give it a look.
      Feel free to change the settings for MediaFiles and MediaImages fields, just keep the type as multiple.
      There are some not-so-pretty hacks for creating and inserting the correct markup, which could probably be changed to use standard input fields, though I'm a bit at a loss right now how to get it to work. I've also still got to take a look at error handling before I can call it fit for production. All feedback and pointers are appreciated (that's also why I post this in the development section).

      Edit 09.03.2016 / version 0.0.4: there's now also a "Media" admin page with a shortcut to quickly add a new library.

      Edit 01.05.2016:
      Version 0.0.8:
      - The module now supports nested media libraries (all descendants of eligible media libraries are also selectable in link/image picker).
      - There's a MediaLibrary::getPageMediaLibraries method you can hook after to modify the array of available libraries.
      - You can switch between (default) select dropdowns or radio boxes in the module configuration of MediaLIbrary to choose libraries.
      Edit 10.10.2018:
      Version 0.1.3:
      - Dropped compatibility for ProcessWire legacy versions by adding namespaces
      - Allow deletion of libraries from the Media overview admin page
      - Added an option to hide media libraries from the page tree (optionally also for superusers)
    • By Robin S
      This module corrects a few things that I find awkward about the "Add New Template" workflow in the PW admin. I opened a wishlist topic a while back because it would good to resolve some of these things in the core, but this module is a stopgap for now.
      Originally I was going to share these as a few standalone hooks, but decided to bundle them together in a configurable module instead.
      Add Template Enhancements
      A module for ProcessWire CMS/CMF. Adds some efficiency enhancements when adding or cloning templates via admin.

      Features
      Derive label from name when new template added: if you like to give each of your templates a label then this feature can save some time. The label can be added automatically when templates are added in admin, in admin/API, or not at all. There are options for underscore/hyphen replacement and capitalisation of the label. Edit template after add: when adding only a single template, the template is automatically opened for editing after it is added. Copy field contexts when cloning: this copies the field contexts (a.k.a. overrides such as column width, label and description) from the source template to the new template when using the "Duplicate/clone this template?" feature on the Advanced tab. Copy field contexts when duplicating fields: this copies the field contexts if you select the "Duplicate fields used by another template" option when adding a new template. Usage
      Install the Add Template Enhancements module.
      Configure the module settings according to what suits you.
       
      https://github.com/Toutouwai/AddTemplateEnhancements
      https://modules.processwire.com/modules/add-template-enhancements/
    • By Mike Rockett
      As I mentioned in this issue, I've create a new textformatter for ParsedownExtraPlugin, which adds some oomph to your markdown.
      Repo: Parsedown Extra Plugin
      Unlike the built-in textformatter for Parsedown and Parsedown Extra, this should be used when you want to use Extra with additional configuration/customisation.
      Some examples:
      ### Test {.heading} - A [external link](https://google.com/){.google} with `google` as a class that opens in a new tab if the config property is set. - [Another link](/page){target=_blank} that opens in a new tab even though it isn't external. ```html .html <p>Test</p> ``` There's some config options available to you, such as setting attributes on all/external images and links, setting table and table-cell alignment classes, adjusting footnote classes and IDs, adding <code> attributes to their parent <pre> elements, and changing the <code> class if your syntax highlighter does not use language-*.
      I was thinking about adding the ability to make links open in a new tab by appending a plus to the link syntax, but only external links should be opening in a new tab anyway. Further, this would add extra, unnecessary processing time.
      Please let me know if you bump into any problems. ☺️
    • By Mike Rockett
      TextformatterTypographer (0.4.0 Beta)
      A ProcessWire wrapper for the awesome PHP Typography class, originally authored by KINGdesk LLC and enhanced by Peter Putzer in wp-Typography. Like Smartypants, it supercharges text fields with enhanced typography and typesetting, such as smart quotations, hyphenation in 59 languages, ellipses, copyright-, trade-, and service-marks, math symbols, and more.
      Learn more on my blog
      It's based on the PHP-Typography library found over at wp-Typography, which is more frequently updated and feature rich that its original by KINGdesk LLC.
      The module itself is fully configurable. I haven't done extensive testing, but there is nothing complex about this, and so I only envisage a typographical bug here and there, if any.
      Please do test it out and let me know what you think.
      Also note that I have indicated support for PW 2.8, but I haven't tested there as yet. This was built on PW 3.0.42/62.
    • By Mike Rockett
      Jumplinks for ProcessWire
      Release: 1.5.50
      Jumplinks is an enhanced version of the original ProcessRedirects by Antti Peisa.
      The Process module manages your permanent and temporary redirects (we'll call these "jumplinks" from now on, unless in reference to redirects from another module), useful for when you're migrating over to ProcessWire from another system/platform. Each jumplink supports wildcards, shortening the time needed to create them.
      Unlike similar modules for other platforms, wildcards in Jumplinks are much easier to work with, as Regular Expressions are not fully exposed. Instead, parameters wrapped in curly braces are used - these are described in the documentation.
      Under Development: 2.0, to be powered by FastRoute
      As of version 1.5.0, Jumplinks requires at least ProcessWire 2.6.1 to run.
      View on GitLab
      Download via the Modules Directory
      Read the docs
      Features
      The most prominent features include:
      Basic jumplinks (from one fixed route to another) Parameter-based wildcards with "Smart" equivalents Mapping Collections (for converting ID-based routes to their named-equivalents without the need to create multiple jumplinks) Destination Selectors (for finding and redirecting to pages containing legacy location information) Timed Activation (activate and/or deactivate jumplinks at specific times) 404-Monitor (for creating jumplinks based on 404 hits) Additionally, the following features may come in handy:
      Stale jumplink management Legacy domain support for slow migrations An importer (from CSV or ProcessRedirects) Feedback & Feature Requests
      I’d love to know what you think of this module. Please provide some feedback on the module as a whole, or even regarding smaller things that make it whole. Also, please feel free to submit feature requests and their use-cases.
      Note: Features requested so far have been added to the to-do list, and will be added to 2.0, and not the current dev/master branches.
      Open Source

      Jumplinks is an open-source project, and is free to use. In fact, Jumplinks will always be open-source, and will always remain free to use. Forever. If you would like to support the development of Jumplinks, please consider making a small donation via PayPal.
      Enjoy!