Jump to content

About ssl certificate and https://


Recommended Posts

Quote

How I can change it? The certificate is installed on server!

Hi Franciccio,

The only part in Processwire you need to do is to uncomment 2 lines in the .htaccess file:

# -----------------------------------------------------------------------------------------------
  # 9. If you only want to allow HTTPS, uncomment the RewriteCond and RewriteRule lines below.
  # -----------------------------------------------------------------------------------------------
    RewriteCond %{HTTPS} off
    RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

The rest is done on your hosting server.

Many Hosters these days have an easy Let's Encrypt setup in their CPanel.
Unless your Hosting is Godaddy. I had a hard time not so long ago with Godaddy's support.
They conduct a very demotivational policy to let you setup Let's Encrypt.

 

Link to comment
Share on other sites

9 minutes ago, pwired said:

Many Hosters these days have an easy Let's Encrypt setup in their CPanel.

Even if you do it manually (depending on your host), the cron setup is simple. Letsencrypt does a good job of covering the bases.

 

Link to comment
Share on other sites

Hi, I remove "#" and now the site is "INTERNAL SERVER ERROR - Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request"

 

RewriteCond %{HTTPS} off
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

So, I re-put #

# RewriteCond %{HTTPS} off

# RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

 

BUT NOW THE SITE IS ALWAYS "INTERNAL SERVER ERROR". All white.
It's autodistruct.

I don't understand.
How can I take the version precedent htpaccess?

 

 

Link to comment
Share on other sites

My htaccess file is this:

 

#################################################################################################
# START PROCESSWIRE HTACCESS DIRECTIVES
# @version 3.0
# @indexVersion 300
#################################################################################################

# -----------------------------------------------------------------------------------------------
# 1. Don't show directory indexes, but do follow symbolic links 
# 500 NOTE: Some cloud hosting companies don't allow +SymLinksIfOwnerMatch. 
# Uncomment +SymLinksifOwnerMatch and comment +SymLinksIfOwnerMatch if you have 500 errors. 
# If that doesn't resolve the error, then set it back to +SymLinksIfOwnerMatch. 
# -----------------------------------------------------------------------------------------------

Options -Indexes
Options +SymLinksIfOwnerMatch
# Options +SymLinksifOwnerMatch

# -----------------------------------------------------------------------------------------------
# 2. Let ProcessWire handle 404s
# -----------------------------------------------------------------------------------------------

ErrorDocument 404 /index.php

# -----------------------------------------------------------------------------------------------
# 3. Handle request for missing favicon.ico/robots.txt files (no ending quote for Apache 1.3)
# -----------------------------------------------------------------------------------------------

<Files favicon.ico>
  ErrorDocument 404 "The requested file favicon.ico was not found.
</Files>

<Files robots.txt>
  ErrorDocument 404 "The requested file robots.txt was not found.
</Files>

# -----------------------------------------------------------------------------------------------
# 4. Protect from XSS with Apache headers
# -----------------------------------------------------------------------------------------------

<IfModule mod_headers.c>
  # prevent site from being loaded in an iframe on another site
  # you will need to remove this one if you want to allow external iframes
  Header always append X-Frame-Options SAMEORIGIN 

  # to prevent cross site scripting (IE8+ proprietary)
  Header set X-XSS-Protection "1; mode=block"

  # prevent mime-based attacks via content sniffing (IE+Chrome)
  # Header set X-Content-Type-Options "nosniff" 
</IfModule>

# -----------------------------------------------------------------------------------------------
# 5. Protect ProcessWire system files 
# -----------------------------------------------------------------------------------------------

<FilesMatch "\.(inc|info|info\.json|module|sh|sql)$|^\..*$|composer\.(json|lock)$">
  <IfModule mod_authz_core.c>
    Require all denied
  </IfModule>
  <IfModule !mod_authz_core.c>
    Order allow,deny
  </IfModule>
</FilesMatch>

# -----------------------------------------------------------------------------------------------
# 6. Override a few PHP settings that can't be changed at runtime (not required)
# 500 NOTE: Try commenting out this entire section below if getting Apache 500 errors.
# -----------------------------------------------------------------------------------------------

<IfModule mod_php5.c>
  php_flag magic_quotes_gpc        off
  php_flag magic_quotes_sybase        off
  php_flag register_globals        off
</IfModule>

# -----------------------------------------------------------------------------------------------
# 7. Set default directory index files
# -----------------------------------------------------------------------------------------------

DirectoryIndex index.php index.html index.htm

# -----------------------------------------------------------------------------------------------
# 8. ProcessWire requires mod_rewrite
# -----------------------------------------------------------------------------------------------

<IfModule mod_rewrite.c>

  RewriteEngine On
  AddDefaultCharset UTF-8

  # -----------------------------------------------------------------------------------------------
  # 9. If you only want to allow HTTPS, uncomment the RewriteCond and RewriteRule lines below.
  # -----------------------------------------------------------------------------------------------
  
  # RewriteCond %{HTTPS} off
  # RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]
  
  # If using an AWS load balancer, use these two lines below instead of those above:
  # RewriteCond %{HTTP:X-Forwarded-Proto} =http 
  # RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

  # -----------------------------------------------------------------------------------------------
  # 10. Set an environment variable so the installer can detect that mod_rewrite is active.
  # Note that some web hosts don't support this. If you get a 500 error, you might try 
  # commenting out this SetEnv line below. 
  # -----------------------------------------------------------------------------------------------

  <IfModule mod_env.c>
    SetEnv HTTP_MOD_REWRITE On
  </IfModule>

  # -----------------------------------------------------------------------------------------------
  # 11. OPTIONAL: Set a rewrite base if rewrites aren't working properly on your server.
  # And if your site directory starts with a "~" you will most likely have to use this.
  # -----------------------------------------------------------------------------------------------

  # RewriteBase /
  # RewriteBase /pw/
  # RewriteBase /~user/

  # -----------------------------------------------------------------------------------------------
  # 12. Access Restrictions: Keep web users out of dirs that begin with a period,
  # but let services like Lets Encrypt use the webroot authentication method.
  # -----------------------------------------------------------------------------------------------

  RewriteRule "(^|/)\.(?!well-known)" - [F]

  # -----------------------------------------------------------------------------------------------
  # 13. OPTIONAL: Redirect users to the 'www.' version of the site (uncomment to enable).
  # For example: http://processwire.com/ would be redirected to http://www.processwire.com/
  # -----------------------------------------------------------------------------------------------

  # RewriteCond %{HTTP_HOST} !^www\. [NC]
  # RewriteRule ^ http://www.%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

  # ----------------------------------------------------------------------------------------------- 
  # 14. OPTIONAL: Send URLs with non-ASCII name-format characters to 404 page (optimization)
  # ----------------------------------------------------------------------------------------------- 

  # RewriteCond %{REQUEST_URI} "[^-_.a-zA-Z0-9/~]"
  # RewriteCond %{REQUEST_FILENAME} !-f
  # RewriteCond %{REQUEST_FILENAME} !-d
  # RewriteRule ^(.*)$ index.php?it=/http404/ [L,QSA]

  # -----------------------------------------------------------------------------------------------
  # 15. Access Restrictions: Protect ProcessWire system files
  # -----------------------------------------------------------------------------------------------

  # Allow screenshot files (for install.php only: this 1 line below may be removed after install)
  RewriteCond %{REQUEST_URI} !(^|/)site-[^/]+/install/[^/]+\.(jpg|jpeg|png|gif)$
  # Block access to any htaccess files
  RewriteCond %{REQUEST_URI} (^|/)\.htaccess$ [NC,OR]
  # Block access to protected assets directories
  RewriteCond %{REQUEST_URI} (^|/)(site|site-[^/]+)/assets/(cache|logs|backups|sessions|config|install|tmp)($|/.*$) [OR]
  # Block acceess to the /site/install/ directory
  RewriteCond %{REQUEST_URI} (^|/)(site|site-[^/]+)/install($|/.*$) [OR]
  # Block dirs in /site/assets/ dirs that start with a hyphen
  RewriteCond %{REQUEST_URI} (^|/)(site|site-[^/]+)/assets.*/-.+/.* [OR]
  # Block access to /wire/config.php, /site/config.php, /site/config-dev.php, and /wire/index.config.php
  RewriteCond %{REQUEST_URI} (^|/)(wire|site|site-[^/]+)/(config|index\.config|config-dev)\.php$ [OR]
  # Block access to any PHP-based files in /templates-admin/
  RewriteCond %{REQUEST_URI} (^|/)(wire|site|site-[^/]+)/templates-admin($|/|/.*\.(php|html?|tpl|inc))$ [OR]
  # Block access to any PHP or markup files in /site/templates/
  RewriteCond %{REQUEST_URI} (^|/)(site|site-[^/]+)/templates($|/|/.*\.(php|html?|tpl|inc))$ [OR]
  # Block access to any PHP files in /site/assets/
  RewriteCond %{REQUEST_URI} (^|/)(site|site-[^/]+)/assets($|/|/.*\.php)$ [OR]
  # Block access to any PHP files in core or core module directories
  RewriteCond %{REQUEST_URI} (^|/)wire/(core|modules)/.*\.(php|inc|tpl|module|info\.json)$ [OR]
  # Block access to any PHP files in /site/modules/
  RewriteCond %{REQUEST_URI} (^|/)(site|site-[^/]+)/modules/.*\.(php|inc|tpl|module|info\.json)$ [OR]
  # Block access to any software identifying txt files
  RewriteCond %{REQUEST_URI} (^|/)(COPYRIGHT|INSTALL|README|htaccess)\.(txt|md|textile)$ [OR]
  # Block all http access to the default/uninstalled site-default directory
  RewriteCond %{REQUEST_URI} (^|/)site-default/
  # If any conditions above match, issue a 403 forbidden
  RewriteRule ^.*$ - [F,L]

  # PW-PAGENAME
  # ----------------------------------------------------------------------------------------------- 
  # 16a. Ensure that the URL follows the name-format specification required by PW
  # See also directive 16b below, you should choose and use either 16a or 16b. 
  # ----------------------------------------------------------------------------------------------- 

  RewriteCond %{REQUEST_URI} "^/~?[-_.a-zA-Z0-9/]*$"
  
  # ----------------------------------------------------------------------------------------------- 
  # 16b. Alternative name-format specification for UTF8 page name support.
  # If used, comment out section 16a above and uncomment the directive below. If you have updated 
  # your $config->pageNameWhitelist make the characters below consistent with that. 
  # ----------------------------------------------------------------------------------------------- 
  
  # RewriteCond %{REQUEST_URI} "^/~?[-_./a-zA-Z0-9æåäßöüđжхцчшщюяàáâèéëêěìíïîõòóôøùúûůñçčćďĺľńňŕřšťýžабвгдеёзийклмнопрстуфыэęąśłżź]*$"
  
  # END-PW-PAGENAME
  # -----------------------------------------------------------------------------------------------
  # 17. If the request is for a file or directory that physically exists on the server,
  # then don't give control to ProcessWire, and instead load the file
  # ----------------------------------------------------------------------------------------------- 

  RewriteCond %{REQUEST_FILENAME} !-f
  RewriteCond %{REQUEST_FILENAME} !-d
  RewriteCond %{REQUEST_FILENAME} !(favicon\.ico|robots\.txt)

  # -----------------------------------------------------------------------------------------------
  # 18. OPTIONAL: Prevent ProcessWire from attempting to serve images or anything in /site/assets/. 
  # Both of these lines are optional, but can help to reduce server load. However, they
  # are not compatible with the $config->pagefileSecure option (if enabled) and they 
  # may produce an Apache 404 rather than your regular 404. You may uncomment the two lines
  # below if you don't need to use the $config->pagefileSecure option. After uncommenting, test
  # a URL like domain.com/site/assets/files/test.jpg to make sure you are getting a 404 and not
  # your homepage. If getting your homepage, then either: do not use this option, or comment out 
  # section #2 above that makes ProcessWire the 404 handler. 
  # ----------------------------------------------------------------------------------------------- 

  # RewriteCond %{REQUEST_FILENAME} !\.(jpg|jpeg|gif|png|ico)$ [NC]
  # RewriteCond %{REQUEST_FILENAME} !(^|/)site/assets/

  # ----------------------------------------------------------------------------------------------- 
  # 19. Pass control to ProcessWire if all the above directives allow us to this point.
  # For regular VirtualHosts (most installs)
  # ----------------------------------------------------------------------------------------------- 
  RewriteRule ^(.*)$ index.php?it=$1 [L,QSA]

  # ----------------------------------------------------------------------------------------------- 
  # 20. If using VirtualDocumentRoot (500 NOTE): comment out the one above and use this one instead
  # ----------------------------------------------------------------------------------------------- 
  # RewriteRule ^(.*)$ /index.php?it=$1 [L,QSA]

</IfModule>

#################################################################################################
# END PROCESSWIRE HTACCESS DIRECTIVES
#################################################################################################

# SP BEGIN php handler
<IfModule mod_fcgid.c>
          AddHandler fcgid-script .php .php5 .php7 .phtml
          FcgidWrapper    /usr/local/cpanel/cgi-sys/sp-ea-php56 .php
          FcgidWrapper    /usr/local/cpanel/cgi-sys/sp-ea-php56 .php5
          FcgidWrapper    /usr/local/cpanel/cgi-sys/sp-ea-php56 .php7
          FcgidWrapper    /usr/local/cpanel/cgi-sys/sp-ea-php56 .phtml
</IfModule>
# SP END php handler

Link to comment
Share on other sites

ok, but on github there is a htaccess.txt file text, I must change the extension, no?

I delete old file and create a new with name ".htaccess", then I cut-copy the body of htaccess on gothub, but not work anything. It is a drama unsolvable.
So, I must disinstall all the site.

I suggest that all readers never touch the processwire htaccess file again. It is not a normal file. You can't change a comma and put it back, because even if you put it back where it was, it's like you've written something completely new and different. Madness.

Link to comment
Share on other sites

On Github is a .txt file, that correct. But its content should work just fine.

NEVER delete a file you might need again. Especially while debugging.

So as the new .htaccess doesn't as well... what were the last changes you made?
Did you install or change files aside from .htaccess?
Did you move folders?
Did you enable anything in your hosting panel?

It seems you tried to install SSL.
How did you do that?
Via hosting panel?
Manual cert files or something similar?

One change in the .htaccess can potentially break everything but it can always be reversed.

Link to comment
Share on other sites

In my hosting pannell I haven't change anything because the server staff tell me that the application of ssl certificate was AUTOMATIC. Infact it work very well in a subdomain wordpress, and I don't do absolutely nothing. 
But the ssl certificate Lets Encript is turn ON on my site from 9 months. 
Yesterday I think about application it in first major principal domain processwire and so I ask informations here. 

I open .htaccess by FILEZILLA and I remove 2 "#". 
Stop.
All distruct.
Ok, I put back the 2 "#" and always all smash.

I haven't change anything neither in processwir panel.

Anyway, thank you very much for your help!
 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...