Jump to content

Recommended Posts

ProcessNetteTester

Run Nette Tester tests within ProcessWire admin.
(continued from here)

processnettetester-v008.thumb.png.25414515c3b972c21ed2cd7e948547e7.png

Features

  • AJAX interface for running Nette Tester tests, in bulk or manually
  • display counter, error message and execution time in a table
  • run all tests at once or launch single tests
  • show formatted test error messages and report PHP syntax errors
  • stop on first failed test (optional)
  • hide passed tests (optional)
  • display failed/total instead passed/total (optional)
  • re-run failed tests only (optional)
  • auto scroll (optional)
  • include or exclude tests based on query parameters
  • start/stop all tests with the spacebar
  • reset one test or all tests (ctrl+click)
  • TracyDebugger File Editor integration

https://modules.processwire.com/modules/process-nette-tester/

https://github.com/rolandtoth/ProcessNetteTester

  • Like 13

Share this post


Link to post
Share on other sites

I've added Tracy Editor integration, so if Tracy is installed and its File Editor feature is enabled you can click on a test name and the editor loads.

@adrian

It was not straightforward to integrate the editor, adding "tracy://?f=..." wasn't enough. I've pulled the corresponding script and then it started to work fine.

However, currently the page reloads after save in the editor which is a drawback in this module. Is there a way to skip this? Perhaps adding an extra parameter to tracyFileEditorLoader.loadFileEditor?

Or would it interfere with the editor's Backup feature?
(I don't mind if it's not available in this case)

  • Like 3

Share this post


Link to post
Share on other sites

Hey @tpr - I think the issue with the file-editor.js file is that in Tracy it's not loaded until the File Editor panel is triggered. I don't think I really want to change this behavior because I'd rather Tracy loaded as little as possible on each page load and only bring in panel specific assets when needed. Is that ok? EDIT: actually I don't know why you are having to load it - surely you are still opening the editor panel - not sure why that file isn't loaded.

Regarding the page reload - typically in the Tracy File Editor you are editing the template for the page you are viewing, so you actually want to reload the page to see the changes. Saving could be converted to AJAX, but then you'd need to reload the page anyway to see the changes. I understand it's not what you are looking for in this case though, so maybe we need an AJAX save option - maybe two buttons: Save and Save & Reload. 

Any thoughts?

Share this post


Link to post
Share on other sites

tracyFileEditorLoader was not available until the File Editor panel was not opened, so clicking on an edit link (outside of any Tracy panel) didn't do anything. Anyway, I'm fine with the current solution.

An AJAX save would definitely solve the issue here but I don't know if there any users who would use this. I can live with the page reload, I think I would use the File Editor only to see what's happening or what went wrong, and edit the file in my IDE. So I would suggest leaving as it is until someone requests that.

  • Like 2

Share this post


Link to post
Share on other sites
5 minutes ago, tpr said:

tracyFileEditorLoader was not available until the File Editor panel was not opened, so clicking on an edit link (outside of any Tracy panel) didn't do anything.

Interesting. Test this out.

1) Make sure you have: "Force editor links to use Tracy File Editor" checked.

2) Turn on the File Editor panel

3) Load a page and click the edit template icon at the bottom right of the Request Info panel - it should load the File Editor

That works for me. Does it work for you?

Share this post


Link to post
Share on other sites

It works. I will check it on localhost too, that's where it failed, but perhaps I hadn't checked the Force option.

Share this post


Link to post
Share on other sites

Worked fine on the other site at localhost so I removed the included Tracy script, thanks!

  • Like 1

Share this post


Link to post
Share on other sites

I've updated the module to v0.0.9: failure messages containing HTML are displayed as plain text. So eg. if you test if an iframe markup is returned and it fails, the error displayed will show the markup as text and not parsed as HTML as before.

  • Like 3

Share this post


Link to post
Share on other sites

New in version 0.1.2:

  • show test method and assertion count for passed tests
  • display breadcrumb above test file name (configurable)

image.png.9ddebf6c9012f63cdb87c4e640560b3d.png

  • Like 4

Share this post


Link to post
Share on other sites

Many thanks for this module, it's coming in handy! However, using v.0.1.3 on my PW 3.0.135 localhost install, it's not showing Breadcrumbs, though I have that option selected. You mention configurability but I'm not sure where changes could be made.

Share this post


Link to post
Share on other sites

Do you have your test files in subdirectories? The breadcrumb should show the subdirectory names (paths). On configurable I meant the "Show breadcrumbs" checkbox above the test list.

  • Like 1

Share this post


Link to post
Share on other sites
On 9/4/2019 at 12:55 AM, tpr said:

Do you have your test files in subdirectories? The breadcrumb should show the subdirectory names (paths). On configurable I meant the "Show breadcrumbs" checkbox above the test list.

Thanks, makes perfect sense now.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mike Rockett
      Jumplinks for ProcessWire
      Release: 1.5.56
      Composer: rockett/jumplinks
      Jumplinks is an enhanced version of the original ProcessRedirects by Antti Peisa.
      The Process module manages your permanent and temporary redirects (we'll call these "jumplinks" from now on, unless in reference to redirects from another module), useful for when you're migrating over to ProcessWire from another system/platform. Each jumplink supports wildcards, shortening the time needed to create them.
      Unlike similar modules for other platforms, wildcards in Jumplinks are much easier to work with, as Regular Expressions are not fully exposed. Instead, parameters wrapped in curly braces are used - these are described in the documentation.
      Under Development: 2.0, to be powered by FastRoute
      As of version 1.5.0, Jumplinks requires at least ProcessWire 2.6.1 to run.
      View on GitLab
      Download via the Modules Directory
      Read the docs
      Features
      The most prominent features include:
      Basic jumplinks (from one fixed route to another) Parameter-based wildcards with "Smart" equivalents Mapping Collections (for converting ID-based routes to their named-equivalents without the need to create multiple jumplinks) Destination Selectors (for finding and redirecting to pages containing legacy location information) Timed Activation (activate and/or deactivate jumplinks at specific times) 404-Monitor (for creating jumplinks based on 404 hits) Additionally, the following features may come in handy:
      Stale jumplink management Legacy domain support for slow migrations An importer (from CSV or ProcessRedirects) Feedback & Feature Requests
      I’d love to know what you think of this module. Please provide some feedback on the module as a whole, or even regarding smaller things that make it whole. Also, please feel free to submit feature requests and their use-cases.
      Note: Features requested so far have been added to the to-do list, and will be added to 2.0, and not the current dev/master branches.
      Open Source

      Jumplinks is an open-source project, and is free to use. In fact, Jumplinks will always be open-source, and will always remain free to use. Forever. If you would like to support the development of Jumplinks, please consider making a small donation via PayPal.
      Enjoy! :)
    • By BitPoet
      As threatened in Ryan's announcement for 3.0.139, I built a little module for sliding toggles as a replacement for checkboxes. Styling of the input is CSS3 only (with all the usual caveats about older browsers), no JS necessary, and may still be a bit "rough around the edges", so to speak, since I didn't have much time for testing on different devices or brushing things up enough so I'd feel comfortable pushing it to the module directory. But here's the link to the GitHub repo for now:
      InputfieldSlideToggle
      Fieldtype and Inputfield that implements smartphone-style toggles as replacement for checkbox inputs. The visualization is CSS-only, no additional JS necessary.
      Status
      Still very alpha, use with caution!
      Features / Field Settings
      Size
      You can render the toggles in four different sizes: small, medium, large and extra large.
      Off Color
      Currently, "unchecked" toggles can be displayed either in grey (default) or red.
      On Color
      "Checked" toggles can be rendered in one of these colors: blue (default), black, green, grey, orange or red.
      Screenshots

      Some examples with checkbox label


      View all Size and Color Combinations
      Small toggles Medium toggles Big toggles Extra big toggles  









    • By Orkun
      Hi Guys
      I needed to add extended functionalities for the InputfieldDatetime Module (module is from processwire version 2.7.3) because of a Request of Customer.
      So I duplicated the module and placed it under /site/modules/.
      I have added 3 new Settings to the InputfieldDatetime Module.
      1. Day Restriction - Restrict different days based on weekdays selection (e.g. saturday, sunday) - WORKING

       
      2. Time Slots - Define Time slots based on custom Integer Value (max is 60 for 1 hour) - WORKING

       
      3. Time Range Rules per Weekday - Define a minTime and MaxTime per Weekday (e.g. Opening Hours of a Restaurant) - NOT WORKING PROPERLY

       
      The Problem
      Time Slots and Day Restriction working fine so far. But the Time Range Rules per Weekday doesn't work right.
      What should happen is, that when you click on a date, it should update the minTime and maxTime of the Time Select.
      But the change on the select only happens if you select a date 2 times or when you select a date 1 time and then close the datepicker and reopen it again.
      The time select doesn't get change when you select a date 1 time and don't close the picker.
      Here is the whole extended InputfieldDatetime Module.
      The Files that I have changed:
      InputfieldDatetime.module InputfieldDatetime.js jquery-ui-timepicker-addon.js (https://trentrichardson.com/examples/timepicker/) - updated it to the newest version, because minTime and maxTime Option was only available in the new version  
      Thats the Part of the JS that is not working correctly:
      if(datetimerules && datetimerules.length){ options.onSelect = function(date, inst) { var day = $(this).datetimepicker("getDate").getDay(); day = day.toString(); var mintime = $(this).attr('data-weekday'+day+'-mintime'); var maxtime = $(this).attr('data-weekday'+day+'-maxtime'); console.log("weekday: "+day); console.log("minTime: "+mintime); console.log("maxTime: "+maxtime); var optionsAll = $(this).datetimepicker( "option", "all" ); optionsAll.minTime = mintime; optionsAll.maxTime = maxtime; $(this).datetimepicker('destroy'); $(this).datetimepicker(optionsAll); $(this).datetimepicker('refresh'); //$.datepicker._selectDate($(this).attr("id"),date); //$.datepicker._base_getDateDatepicker(); // var inst = $.datepicker._getInst($(this)); // $.datepicker._updateDatepicker(inst); /*$(this).datetimepicker('destroy'); InputfieldDatetimeDatepicker($(this), mintime, maxtime); $(this).datetimepicker('refresh'); */ // $(this).datetimepicker('option', {minTime: mintime, maxTime: maxtime}); } } Can you have a look and find out what the Problem is?
      InputfieldDatetime.zip
       
      Kind Regards
      Orkun
    • By teppo
      This module tracks changes, additions, removals etc. of public (as in "not under admin") pages of your site. Like it's name says, it doesn't attempt to be a version control system or anything like that - just a log of what's happened.
      At the moment it's still a work in progress and will most likely be a victim of many ruthless this-won't-work-let's-try-that-instead cycles, but I believe I've nailed basic functionality well enough to post it here.. so, once again, I'll be happy to hear any comments you folks can provide
      https://modules.processwire.com/modules/process-changelog/
      https://github.com/teppokoivula/ProcessChangelog
      How does it work?
      Exactly like it's (sort of) predecessor, Process Changelog actually consists of two modules: Process Changelog and Process Changelog Hooks. Hooks module exists only to serve main module by hooking into various functions within Pages class, collecting data of performed operations, refining it and keeping up a log of events in it's own custom database table (process_changelog.) Visible part is managed by Process Changelog, which provides users a (relatively) pretty view of the contents of said log table.
      How do you use it?
      When installed this module adds new page called Changelog under Admin > Setup which provides you with a table view of collected data and basic filtering tools See attached screenshots to get a general idea about what that page should look like after a while.
      For detailed installation instructions etc. see README.md.
       


    • By Gadgetto
      Status update links (inside this thread) for SnipWire development will be always posted here:
      2019-08-08
      2019-06-15
      2019-06-02
      2019-05-25
      If you are interested, you can test the current state of development:
      https://github.com/gadgetto/SnipWire
      Please note that the software is not yet intended for use in a production system (alpha version).
      If you like, you can also submit feature requests and suggestions for improvement. I also accept pull requests.
      ---- INITIAL POST FROM 2019-05-25 ----
      I wanted to let you know that I am currently working on a new ProcessWire module that fully integrates the Snipcart Shopping Cart System into ProcessWire. (this is a customer project, so I had to postpone the development of my other module GroupMailer).
      The new module SnipWire offers full integration of the Snipcart Shopping Cart System into ProcessWire.
      Here are some highlights:
      simple setup with (optional) pre-installed templates, product fields, sample products (quasi a complete shop system to get started immediately) store dashboard with all data from the snipcart system (no change to the snipcart dashboard itself required) Integrated REST API for controlling and querying snipcart data webhooks to trigger events from Snipcart (new order, new customer, etc.) multi currency support self-defined/configurable tax rates etc. Development is already well advanced and I plan to release the module in the next 2-3 months.
      I'm not sure yet if this will be a "Pro" module or if it will be made available for free.
      I would be grateful for suggestions and hints!
      (please have a look at the screenshots to get an idea what I'm talking about)
       




×
×
  • Create New...