Robin S

Restrict Repeater Matrix

Recommended Posts

First a note about my other modules...

I have three existing modules that are similar in that they allow restrictions to be placed on repeating inputfields: Limit Repeater, Limit PageTable, Limit Table

Restrict Repeater Matrix takes a different approach to the module configuration from those other modules. The module settings for Restrict Repeater Matrix are applied in the field settings rather in a module config screen. I think this new approach is better, but it means that it isn't practical to create different settings for different roles via the admin interface. Instead the module has a hookable method, allowing roles to be targeted and other advanced usages to be achieved via a hook. The result is that the module is more flexible.

I intend to transition my other modules to the same approach over the coming weeks, but because this will result in breaking changes I will be releasing the updated modules under new names ("Restrict Repeater", etc) to avoid users upgrading via the Upgrades module without full awareness of the changes. The old modules will be marked as deprecated.

 

Restrict Repeater Matrix

A module for ProcessWire CMS/CMF. Allows restrictions and limits to be placed on Repeater Matrix fields. Requires FieldtypeRepeaterMatrix >= v0.0.4

For any matrix type in a Repeater Matrix field you have the option to:

  • Prevent drag-sorting of items
  • Prevent cloning of items
  • Prevent toggling of the published state of items
  • Prevent trashing of items
  • Limit the number of items that may be added to the inputfield

Please note that restrictions and limits are applied with CSS/JS so should not be considered tamper-proof.

Usage

Install the Restrict Repeater Matrix module.

For each matrix type created in the Repeater Matrix field settings, a "Restrictions" fieldset is added at the bottom of the matrix type settings:

2017-06-26_213521

For newly added matrix types, the settings must be saved first in order for the Restrictions fieldset to appear. Set restrictions for each matrix type as needed. A limit of zero means that no items of that matrix type may be added to the inputfield.

Setting restrictions via a hook

Besides setting restrictions in the field settings, you can also apply or modify restrictions by hooking RestrictRepeaterMatrix::checkRestrictions. This allows for more focused restrictions, for example, applying restrictions depending on the template of the page being edited or depending on the role of the user.

The checkRestrictions() method receives the following arguments:

  • $field This Repeater Matrix field
  • $inputfield This Repeater Matrix inputfield
  • $matrix_types An array of matrix types for this field. Each key is the matrix type name and the value is the matrix type integer.
  • $page The page that is open in ProcessPageEdit

The method returns a multi-dimensional array of matrix types and restrictions for each of those types. An example of a returned array:

2017-06-26_220809

Example hooks

Prevent the matrix type "images_block" from being added to "my_matrix_field" in a page with the "basic-page" template:

$wire->addHookAfter('RestrictRepeaterMatrix::checkRestrictions', function(HookEvent $event) {
    $field = $event->arguments('field');
    $page = $event->arguments('page');
    $type_restrictions = $event->return;
    if($field->name === 'my_matrix_field' && $page->template->name === 'basic-page') {
        $type_restrictions['images_block']['limit'] = 0;
    }
    $event->return = $type_restrictions;
});

 

Prevent non-superusers from trashing any Repeater Matrix items in "my_matrix_field":

$wire->addHookAfter('RestrictRepeaterMatrix::checkRestrictions', function(HookEvent $event) {
    $field = $event->arguments('field');
    $type_restrictions = $event->return;
    if($field->name === 'my_matrix_field' && !$this->user->isSuperuser()) {
        foreach($type_restrictions as $key => $value) {
            $type_restrictions[$key]['notrash'] = true;
        }
    }
    $event->return = $type_restrictions;
});

 

http://modules.processwire.com/modules/restrict-repeater-matrix/

https://github.com/Toutouwai/RestrictRepeaterMatrix

  • Like 14

Share this post


Link to post
Share on other sites

@cjx2240, sorry to hear that. Can you give some more information please...

  • Is the "who_we_are" field a Repeater Matrix field?
  • Do you have the latest version of Repeater Matrix installed - v0.0.4?
  • Do you have debug mode enabled in /site/config.php? If not please enable and let me know if you see any error messages when you try and edit the field.
  • If you don't see any error messages still, please install Tracy Debugger, tick the "Backend" option for "Show Debug Bar", and check for errors when you try and edit the field, as in the screenshot below:

2017-07-07_094559.png.21f111189d28c49b36be31d0a76e9a7c.png

Thanks.

  • Like 2

Share this post


Link to post
Share on other sites
9 minutes ago, cjx2240 said:

Updating RepeaterMatrix from 0.0.3 to 0.0.4 resolved the issue, thanks.

Thanks for letting me know. I have updated the module to set a minimum version requirement for FieldtypeRepeaterMatrix.

  • Like 2

Share this post


Link to post
Share on other sites

Hi @Robin S

Have not tried this module yet, but I'm curious is it possible to restrict matrix types per template basis? 

Share this post


Link to post
Share on other sites
4 hours ago, Zeka said:

Have not tried this module yet, but I'm curious is it possible to restrict matrix types per template basis? 

Yes, see the "Setting restrictions via a hook" section of the first post / readme.

Share this post


Link to post
Share on other sites

Cannot install the module :(

screenshot-www.juergen-kern.at-2018-02-12-12-28-43.png.36863db7cf33c2e79146decc504c114a.png

There is always the message that FieldtypRepeaterMatrix is not the correct version, but I have downloaded it today from the modules directory - so it must be ok.

screenshot-www.juergen-kern.at-2018-02-12-12-31-55.thumb.png.cf7c29e574607c57bfe8db6e2821ef8f.png

 

Share this post


Link to post
Share on other sites
8 hours ago, Juergen said:

There is always the message that FieldtypRepeaterMatrix is not the correct version, but I have downloaded it today from the modules directory - so it must be ok.

This module requires Repeater Matrix which is part of the Profields bundle. The Matrix module you have shown in your screenshot is something completely different.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Macrura
      Field Descriptions Extended
      This module enables you to extend field descriptions by dividing short descriptions with a longer text that is revealed in a toggle.
      Modules Directory: http://modules.processwire.com/modules/field-descriptions-extended/
      Github: https://github.com/outflux3/FieldDescriptionsExtended
      Extending your field descriptions using the standard field's description field.
      Once this module is installed, it will automatically search your description field for the presence of 5 dashes (-----).
      Any content above the 5 dashes will be visible and the content below the dashes will be hidden. A 'More...' link will appear at the end of the short description which when clicked will reveal the rest of the description.
      Using Simple Markdown Editor with the description field
      If you have Simple Markdown Editor (InputfieldSimpleMDE) installed, you can enable the field description to have that editor.
      *When using Simple MDE, you can use the button (Insert Horizontal Line) instead of typing 5 dashes. More about SimpleMDE.
      Extending your field descriptions using content from a ProcessWire Page for the field description.
      You may use the content from a ProcessWire page as a field description. This would allow you to easily insert images, links, and use hanna codes.
      To use page content for your field descriptions, please follow these instructions:
      Install Select Fields module (FieldtypeFields) http://modules.processwire.com/modules/fieldtype-fields/ Create a new field using this field type, e.g. field_select. Add the field to any template you will be using for your field descriptions. Setup your help pages (for example under a settings branch) where you will store the field description content,using the template containing the Field Select. Add content to a page and select the field where that content should show. To show a short text before the link to the longer content, separate them with 5 dashes Be sure to update your settings on this page, first enable page content descriptions,then specify the name of the Select Fields field, template to search, and content field. If you create a field description using this method, please note that the description field must be blank for contexts where you want the page content to appear.
      You can freely use template context for field descriptions, but the Page Content method is not context sensitive and will display under all contexts where the description is blank.
      ----
      original post:
      This is a new module, hope to release soon, which allows extended field descriptions, in currently 2 ways.
      The main feature of the module is that you can have a short description and then a 'more...' link which drops down a longer block of text.
      This is achieved by separating the intro/visible text and the rest with 5 dashes.

      Example setup:

      the 2nd way is if you are using AdminThemeUiKit, you can show extended field instructions in a panel. The content of the panel is edited on a regular PW page. This use case would probably not be that common, but if you had a field that required some extended instructions for how to use, this could be useful; Also, since this allows you to target information and instructions down at the field level, it could reduce the amount of documentation needed on a global level, since it is a lot more context targeted.

    • By Robin S
      Breadcrumb Dropdowns
      Adds dropdown menus of page edit links to the breadcrumbs in Page Edit.

      Installation
      Install the Breadcrumb Dropdowns module. The module requires ProcessWire >= v3.0.83 and AdminThemeUikit.
      There is a checkbox option in the module config that determines if the breadcrumb dropdowns will include pages that the user does not have permission to edit.
      Features/details
      The module adds an additional breadcrumb item at the end for the currently edited page. That's because I think it's more intuitive for the dropdown under each breadcrumb item to show the item's sibling pages rather than the item's child pages. In the dropdown menus the current page and the current page's parents are highlighted in a crimson colour to make it easier to quickly locate them in case you want to edit the next or previous sibling page. If the option to include uneditable pages is selected then those pages are indicated by a reduced text opacity and the "not-allowed" cursor is shown on hover. There is a limit of 25 sibling pages per dropdown for performance reasons and to avoid the dropdown becoming unwieldy. Incompatibilities
      This module replaces the AdminThemeUikit::renderBreadcrumbs method so will potentially be incompatible with other modules that hook the same method.
       
      https://modules.processwire.com/modules/breadcrumb-dropdowns/
      https://github.com/Toutouwai/BreadcrumbDropdowns
    • By joshuag
      Hey guys, 
      Thought I would share a quick preview of Designme. A module we (Eduardo @elabx and I) are building for visually laying out your templates/edit screens. 🙂
      This is a really quick, zero polish screen grab. FYI. 
      Video #2 - UPDATE
      This new video shows the following features in Designme:
      Re-arranging fields via Drag & Drop Re-sizing fields via Dragging. Adjusting field settings - with live refresh. Working on "hidden" fields while Designme is active. Creating New fields. Deleting fields. Creating/Deleting Tabs. Dragging fields between tabs. Creating fieldsets. Tagging/Un-tagging fields. Fields without headers expand when hovered (like checkboxes). Live filtering of fields in the sidebar. Ability to adjust (all) Template settings without leaving Designme. Template File Tree Editing Template files source code with ACE Editor. Editing Multiple files with ACE Editor. (New Tabs) Saving files. Techie stuff Fields load their own js/css dependancies. *ready to use on creation (*most fields)  Everything happens via Ajax to ProcessPageEdit (via module + hooks). Designme has a JS api that you can use.  All actions trigger events.  We would love any detailed feedback on what you see so far. If you are interested in testing Designme. Let me know below. 🙂
       
       
      Video #1. 
       
    • By dreerr
      TemplateEnginePug (formally TemplateEngineJade)
       
      This module adds Pug templates to the TemplateEngineFactory. It uses https://github.com/pug-php/pug to render templates.
      doctype html html(lang='en') head meta(http-equiv='content-type', content='text/html; charset=utf-8') title= $page->title link(rel='stylesheet', type='text/css', href=$config->urls->templates . 'styles/main.css') body include header.pug h1= $page->title if $page->editable() p: a(href=$page->editURL) Edit Project on GitHub: github.com/dreerr/TemplateEnginePug
      Project in modules directory: modules.processwire.com/modules/template-engine-pug/
       
      For common problems/features/questions about the Factory, use the TemplateEngineFactory thread.
       
    • By tpr
      ProcessNetteTester
      Run Nette Tester tests within ProcessWire admin.
      (continued from here)

      Features
      AJAX interface for running Nette Tester tests, in bulk or manually display counter, error message and execution time in a table run all tests at once or launch single tests show formatted test error messages and report PHP syntax errors stop on first failed test (optional) hide passed tests (optional) display failed/total instead passed/total (optional) re-run failed tests only (optional) auto scroll (optional) include or exclude tests based on query parameters start/stop all tests with the spacebar reset one test or all tests (ctrl+click) https://modules.processwire.com/modules/process-nette-tester/
      https://github.com/rolandtoth/ProcessNetteTester