Jump to content
adrian

Tracy Debugger

Recommended Posts

@Peter Knight - the issue is that since you last upgraded, I added a .php extension to the .module file and ProcessWire doesn't like this because its caching system is remembering the old version. I have seen this many times and it's never prevented access to the admin, so never worried about it too much.

You could remove the TracyDebugger folder from site/modules and see if that lets the admin load. You could clear the site/assets/cache/FileCompiler folder. You could remove the TracyDebugger entry from the modules DB table. 

One or all of those should / might work 🙂

Share this post


Link to post
Share on other sites

I started getting this error with the latest version:

PHP Warning: in_array() expects parameter 2 to be array, string given in .../TracyDebugger/TracyDebugger.module.php:1078

Share this post


Link to post
Share on other sites

Hey @Macrura - looks like you've upgraded from a very old version. Please just save the module settings page and it will be gone.

  • Like 3

Share this post


Link to post
Share on other sites

cool - thanks - did it and it worked. Sorry for the 'false alarm'...

Share this post


Link to post
Share on other sites

Howdy @adrian,

I created two custom image fields, both type integer. This image field has two images while the other field is empty. I do not get this error when running stand alone adminer. I have deleted and recreated this field with the same results. Any ideas why this error only shows for this custom field and not the other?

custom-field.thumb.jpg.13f666be829dfee0ad62f7f263e5cc2c.jpg

Thanks for your help!

Share this post


Link to post
Share on other sites

Hi @rick - based on the error, it looks like your setup doesn't have the mb_strlen available and I am using the AdminerJsonPreview plugin in Tracy's Adminer setup.

If you install mbstring for php it will be fine. Something like this, depending on your flavor of linux:

sudo apt install php7.x-mbstring

 

  • Like 1

Share this post


Link to post
Share on other sites

Thanks @adrian, that was indeed the issue.

homer-computer-doh.jpg.0e87890d468f9d6b57e991d56ce7a74a.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Hello,

on one of my installs the editor window in the Console in the backend doesn't show up and I get this error in the JS debug console:
 

Uncaught SyntaxError: invalid escape sequence
    evalScripts .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:514
    forEach .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:665
    evalScripts .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:508
    init .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:35
    displayTimeout .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:302
    setTimeout handler*initTabs/</< .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:297
    initTabs .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:291
    forEach .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:665
    initTabs .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:264
    init .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:254
    init .../admin/module/edit?name=TracyDebugger&collapse_info=1&_tracy_bar=js&v=2.5.9&XDEBUG_SESSION_STOP=1:388
    <anonymous> .../admin/module/edit?name=TracyDebugger&collapse_info=1:284
edit:1:155320

This has been going on for some time. Also persists after upgrade to v4.21.20. Refreshed modules, cleared all cookies and local storage related to TD to no avail.
Console looks like this and div#tracyConsoleEditor is empty:

console-without-editor.thumb.png.2051ddc2391b5dc18b9ee9dd4839c5f0.png
Any help on how I can back the console editor would be much appreciated.

Share this post


Link to post
Share on other sites

Hi @gebeer - I am not really sure, but my initial hunch is that somehow the last entered code is corrupt. Could you try deleting any browser LocalStorage entries for the site. You can go through and just delete the ones that refer to Tracy if you'd prefer.

Share this post


Link to post
Share on other sites
13 hours ago, adrian said:

Hi @gebeer - I am not really sure, but my initial hunch is that somehow the last entered code is corrupt. Could you try deleting any browser LocalStorage entries for the site. You can go through and just delete the ones that refer to Tracy if you'd prefer.

Thanks for that hint. I already had deleted cookies and local storage. Didn't help. Problem persists across browsers, also in private mode. So it doesn't seem to be related to local storage.

Share this post


Link to post
Share on other sites

Hi @gebeer - sorry that didn't help. Looking through the module code there are only a couple of places where "/admin/module/edit?name=TracyDebugger" appears. One is in the PW Info panel, so could you please disable that and see if it fixes things. The other is in the main module file, so could you try removing this block of code: https://github.com/adrianbj/TracyDebugger/blob/c499ad75ffce7ce473dfd32ef994339a27d61b83/TracyDebugger.module.php#L1124-L1135

 

Share this post


Link to post
Share on other sites
On 8/27/2020 at 9:00 PM, adrian said:

Hi @gebeer - sorry that didn't help. Looking through the module code there are only a couple of places where "/admin/module/edit?name=TracyDebugger" appears. One is in the PW Info panel, so could you please disable that and see if it fixes things. The other is in the main module file, so could you try removing this block of code: https://github.com/adrianbj/TracyDebugger/blob/c499ad75ffce7ce473dfd32ef994339a27d61b83/TracyDebugger.module.php#L1124-L1135

 

I tried both but it didn't help. Also I uninstalled and removed the module, deleted all cookies, local storage and session storage and then reinstalled. Problem persists.
Can't see what the invalid escape sequence could possibly be.
On my local dev install of the website, I don't have that problem.
I'll try to find the cause for this behaviour and will let you know here.
Thanks again.

  • Like 1

Share this post


Link to post
Share on other sites

Has anyone come across this error?

Parse error: syntax error, unexpected ':', expecting ';' or '{' in /home/********/public_html/site/assets/cache/FileCompiler/site/modules/TracyDebugger/includes/PwApiData.php on line 516

PW 3.0.148, Tracy Debugger 4.21.20, PHP 7.2.

line 516 is 

private function phpdoc_params(ReflectionMethod $method) : array {

Have tried a reinstall & cleared complied  files from > Modules. No errors on other sites on same server with same setup. 

Share this post


Link to post
Share on other sites

@dab - are you sure you're actually running PHP 7.2? That error is coming from a return type declaration (https://www.php.net/manual/en/functions.returning-values.php#functions.returning-values.type-declaration) which was available since PHP 7. That said, I didn't mean to exclude < 7 and I don't need the declaration, so the new version just committed should work for you.

  • Like 1

Share this post


Link to post
Share on other sites

@adrianThanks for the speedy reply. Most odd, WHM/Cpanel was reporting PHP 7.2, but I double checked with a "phpinfo" file & it showed PHP5.6! I reset the PHP version to PHP 7.2.32 & it's cleared the error.

Apologies for the incorrect info & thanks for the fix for <7 (& for such a great module)!  

  • Like 1

Share this post


Link to post
Share on other sites
Just now, dab said:

I double checked with a "phpinfo" file

Don't forget that Tracy has a PHPInfo panel that you can use 🙂

  • Like 2

Share this post


Link to post
Share on other sites

Just noticed that every fatal error message starts different:

image.png.2320509a955e5b018ed62337c4dd64c9.png

I don't make errors, so that was new to me. 😅

Nice feature. 😀

Share this post


Link to post
Share on other sites

Trying to upgrade TD to the latest version and I get this:

Fatal Error: Uncaught WireException: No download URL specified in wire/modules/Process/ProcessModule/ProcessModule.module:1072

Happens both on the Modules->New and Settings->Upgrades with the upgrade module. I could upload the zip but that's not the issue.

Reason for upgrade was another error message:

Fatal error: Uncaught Exception: Serialization of 'Closure' is not allowed in [no active file]:0
Stack trace:
#0 {main}
  thrown in [no active file] on line 0

which auto-magically began appearing. I'm not serializing any data and the error disappears when I turn off TD.

Any ideas on what's happening here?

Share this post


Link to post
Share on other sites

Ah, thank you. I wondered where those phrases come from. 😀

Share this post


Link to post
Share on other sites

Hey @adrian! Just wondering: what's your take on extending current panel collection with custom tools on a case-by-case basis? Sorry if this has been discussed already, there's so much stuff in this thread that I can't keep up anymore 😅

I just had a quick look and it seems that adding new panels is currently not possible without directly modifying the module file(s) and dropping the class file to the panels directory. I was wondering if you'd be open to adding some way of "injecting" custom panels from outside the module? My initial idea was something along the lines of allowing custom options to be pushed into the allPanels array by passing it to hookable methods at certain points and adding support for array values so that custom panel options could contain both name and path.

(I didn't actually try this. It's possible that hooks won't work due to load order and all that, so another option would be the Tracy module reading them from config settings; not quite as elegant or robust, but pretty much guaranteed to work.)

Anyway, just throwing in ideas. I'm working on some Wireframe related dev tools, and was thinking that it'd be neat to have them available in the admin — and what better way to do that than to introduce them to Tracy... 🙂

  • Like 2

Share this post


Link to post
Share on other sites

Hi @teppo - I'd love to make it easier to support custom panels.

It's interesting about the $allPanels array - it really wouldn't be necessary except for the title vs the name, eg "phpInfo" to "PHP Info". In most cases it would be easy to programmatically convert the case, except for those with acronyms (PHP, API, etc).

I think you are probably correct that hooks might be problematic because Tracy is always loaded before all other modules. Perhaps module authors who want to add new Tracy panels could simply provide me with the path and panel class name and I can have Tracy check the location if the module is installed. Perhaps as simple as adding a new $externalPanels array that is added to as needed?

This array could be merged into the $allPanels array which would probably need to be made multidimensional to support separate title and path properties so that https://github.com/adrianbj/TracyDebugger/blob/cc1c17e50487580f5c1e3485411d7c9a766b0a4f/TracyDebugger.module.php#L1526 would know what path to use to load these external panels.

Anyway, I'll have a play around and see what I think will work best and send you a test version to work with.

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By horst
      ---------------------------------------------------------------------------------------------------------------------------------
        when working with PW version 2.6+, please use Pim2, not Pim!
        read more here  on how to change from the older to the newer version in existing sites
      ---------------------------------------------------------------------------------------------------------------------------------
      PageImage Manipulator, API for version 1 & 2

      The Page Image Manipulator is a module that let you in a first place do ImageManipulations with your PageImages. - And in a second place there is the possibility to let it work on any imagefile that exists in your servers filesystem, regardless if it is a 'known PW-image'.

      The Page Image Manipulator is a Toolbox for Users and Moduledevelopers. It is written to be as close to the Core ImageSizer as possible. Besides the GD-filterfunctions it contains resize, crop, canvas, rotate, flip, sharpen, unsharpMask and 3 watermark methods.



      How does it work?

      You can enter the ImageManipulator by calling the method pim2Load(). After that you can chain together how many actions in what ever order you like. If your manipulation is finished, you call pimSave() to write the memory Image into a diskfile. pimSave() returns the PageImage-Object of the new written file so we are able to further use any known PW-image property or method. This way it integrates best into the ProcessWire flow.

      The three examples above put out the same visual result: a grayscale image with a width of 240px. Only the filenames will slightly differ.

      You have to define a name-prefix that you pass with the pimLoad() method. If the file with that prefix already exists, all operations are skipped and only the desired PageImage-Object gets returned by pimSave(). If you want to force recreation of the file, you can pass as second param a boolean true: pim2Load('myPrefix', true).

      You may also want to get rid of all variations at once? Than you can call $pageimage->pim2Load('myPrefix')->removePimVariations()!

      A complete list of all methods and actions are at the end of this post.
       
      You may also visit the post with tips & examples for users and module developers.


      How to Install
      Download the module Place the module files in /site/modules/PageImageManipulator/ In your admin, click Modules > Check for new modules Click "install" for PageImageManipulator Done! There are no configuration settings needed, just install and use it. Download    (version 0.2.0)
      get it from the Modules Directory History of origins

      http://processwire.com/talk/topic/3278-core-imagemanipulation/


      ----------------------------------------------------------------------------------------------------------


      Page Image Manipulator - Methods

      * pimLoad  or  pim2Load, depends on the version you use!

      pimLoad($prefix, $param2=optional, $param3=optional)
      param 1: $prefix - (string) = mandatory! param 2: mixed, $forceRecreation or $options param 3: mixed, $forceRecreation or $options return: pim - (class handle) $options - (array) default is empty, see the next method for a list of valid options! $forceRecreation - (bool) default is false It check if the desired image variation exists, if not or if forceRecreation is set to true, it prepares all settings to get ready for image manipulation
      -------------------------------------------------------------------

      * setOptions

      setOptions(array $options)
      param: $options - (array) default is empty return: pim - (class handle) Takes an array with any number valid options / properties and set them by replacing the class-defaults and / or the global config defaults optionally set in the site/config.php under imageSizerOptions or imageManipulatorOptions.

      valid options are:
      quality = 1 - 100 (integer) upscaling = true | false (boolean) cropping = true | false (boolean) autoRotation =true | false (boolean) sharpening = 'none' | 'soft' | 'medium' | 'strong' (string) bgcolor = (array) css rgb or css rgba, first three values are integer 0-255 and optional 4 value is float 0-1, - default is array(255,255,255,0) thumbnailColorizeCustom = (array) rgb with values for colorize, integer -255 - 255 (this can be used to set a custom color when working together with Thumbnails-Module)
        outputFormat = 'gif' | 'jpg' | 'png' (Attention: outputFormat cannot be specified as global option in $config->imageManipulatorOptions!) set {singleOption} ($value)
      For every valid option there is also a single method that you can call, like setQuality(90), setUpscaling(false), etc.
      -------------------------------------------------------------------

      * pimSave

      pimSave()
      return: PageImage-Object If a new image is hold in memory, it saves the current content into a diskfile, according to the settings of filename, imagetype, targetFilename and outputFormat. Returns a PageImage-Object!
      -------------------------------------------------------------------

      * release

      release()
      return: void (nothing) if you, for what ever reason, first load image into memory but than do not save it, you should call release() to do the dishes! 😉 If you use pimSave() to leave the ImageManipulator, release() is called automatically.
      -------------------------------------------------------------------

      * getOptions

      getOptions()
      return: associative array with all final option values example:
      ["autoRotation"] bool(true) ["upscaling"] bool(false) ["cropping"] bool(true) ["quality"] int(90) ["sharpening"] string(6) "medium" ["targetFilename"] string(96) "/htdocs/site/assets/files/1124/pim_prefix_filename.jpg" ["outputFormat"] string(3) "jpg" get {singleOption} ()
      For every valid option there is also a single method that you can call, like getQuality(), getUpscaling(), etc. See method setOptions for a list of valid options!
      -------------------------------------------------------------------

      * getImageInfo

      getImageInfo()
      return: associative array with useful informations of source imagefile example:
      ["type"] string(3) "jpg" ["imageType"] int(2) ["mimetype"] string(10) "image/jpeg" ["width"] int(500) ["height"] int(331) ["landscape"] bool(true) ["ratio"] float(1.5105740181269) ["bits"] int(8) ["channels"] int(3) ["colspace"] string(9) "DeviceRGB" -------------------------------------------------------------------

      * getPimVariations

      getPimVariations()
      return: array of Pageimages Collect all pimVariations of this Pageimage as a Pageimages array of Pageimage objects. All variations created by the core ImageSizer are not included in the collection.
      -------------------------------------------------------------------

      * removePimVariations

      removePimVariations()
      return: pim - (class handle) Removes all image variations that was created using the PIM, all variations that are created by the core ImageSizer are left untouched!
      -------------------------------------------------------------------
      * width

      width($dst_width, $sharpen_mode=null)
      param: $dst_width - (integer) param: $auto_sharpen - (boolean) default is true was deleted with version 0.0.8, - sorry for breaking compatibility param: $sharpen_mode - (string) possible: 'none' | 'soft' | 'medium' | 'strong', default is 'soft' return: pim - (class handle) Is a call to resize where you prioritize the width, like with pageimage. Additionally, after resizing, an automatic sharpening can be done with one of the three modes.
      -------------------------------------------------------------------

      * height

      height($dst_height, $sharpen_mode=null)
      param: $dst_height - (integer) param: $auto_sharpen - (boolean) default is true was deleted with version 0.0.8, - sorry for breaking compatibility param: $sharpen_mode - (string) possible: 'none' | 'soft' | 'medium' | 'strong', default is 'soft' return: pim - (class handle) Is a call to resize where you prioritize the height, like with pageimage. Additionally, after resizing, an automatic sharpening can be done with one of the three modes.
      -------------------------------------------------------------------

      * resize

      resize($dst_width=0, $dst_height=0, $sharpen_mode=null)
      param: $dst_width - (integer) default is 0 param: $dst_height - (integer) default is 0 param: $auto_sharpen - (boolean) default is true was deleted with version 0.0.8, - sorry for breaking compatibility param: $sharpen_mode - (string) possible: 'none' | 'soft' | 'medium' | 'strong', default is 'soft' return: pim - (class handle) Is a call to resize where you have to set width and / or height, like with pageimage size(). Additionally, after resizing, an automatic sharpening can be done with one of the three modes.
      -------------------------------------------------------------------

      * stepResize

      stepResize($dst_width=0, $dst_height=0)
      param: $dst_width - (integer) default is 0 param: $dst_height - (integer) default is 0 return: pim - (class handle) this performs a resizing but with multiple little steps, each step followed by a soft sharpening. That way you can get better result of sharpened images.
      -------------------------------------------------------------------

      * sharpen

      sharpen($mode='soft')
      param: $mode - (string) possible values 'none' | 'soft'| 'medium'| 'strong' return: pim - (class handle) Applys sharpening to the current memory image. You can call it with one of the three predefined pattern, or you can pass an array with your own pattern.
      -------------------------------------------------------------------

      * unsharpMask

      unsharpMask($amount, $radius, $threshold)
      param: $amount - (integer) 0 - 500, default is 100 param: $radius - (float) 0.1 - 50, default is 0.5 param: $threshold - (integer) 0 - 255, default is 3 return: pim - (class handle) Applys sharpening to the current memory image like the equal named filter in photoshop.
      Credit for the used unsharp mask algorithm goes to Torstein Hønsi who has created the function back in 2003.
      -------------------------------------------------------------------

      * smooth

      smooth($level=127)
      param: $level - (integer) 1 - 255, default is 127 return: pim - (class handle) Smooth is the opposite of sharpen. You can define how strong it should be applied, 1 is low and 255 is strong.
      -------------------------------------------------------------------

      * blur

      blur()
      return: pim - (class handle) Blur is like smooth, but cannot called with a value. It seems to be similar like a result of smooth with a value greater than 200.
      -------------------------------------------------------------------

      * crop

      crop($pos_x, $pos_y, $width, $height)
      param: $pos_x - (integer) start position left param: $pos_y - (integer) start position top param: $width - (integer) horizontal length of desired image part param: $height - (integer) vertical length of desired image part return: pim - (class handle) This method cut out a part of the memory image.
      -------------------------------------------------------------------

      * canvas

      canvas($width, $height, $bgcolor, $position, $padding)
      param: $width = mixed, associative array with options or integer, - mandatory! param: $height = integer, - mandatory if $width is integer! param: $bgcolor = array with rgb or rgba, - default is array(255, 255, 255, 0) param: $position = one out of north, northwest, center, etc, - default is center param: $padding = integer as percent of canvas length, - default is 0 return: pim - (class handle) This method creates a canvas according to the given width and height and position the memory image onto it.
      You can pass an associative options array as the first and only param. With it you have to set width and height and optionally any other valid param. Or you have to set at least width and height as integers.
      Hint: If you want use transparency with rgba and your sourceImage isn't of type PNG, you have to define 'png' as outputFormat with your initially options array or, for example, like this: $image->pimLoad('prefix')->setOutputFormat('png')->canvas(300, 300, array(210,233,238,0.5), 'c', 5)->pimSave()
      -------------------------------------------------------------------

      * flip

      flip($vertical=false)
      param: $vertical - (boolean) default is false return: pim - (class handle) This flips the image horizontal by default. (mirroring)
      If the boolean param is set to true, it flips the image vertical instead.
      -------------------------------------------------------------------

      * rotate

      rotate($degree, $backgroundColor=127)
      param: $degree - (integer) valid is -360 0 360 param: $backgroundColor - (integer) valid is 0 - 255, default is 127 return: pim - (class handle) This rotates the image. Positive values for degree rotates clockwise, negative values counter clockwise. If you use other values than 90, 180, 270, the additional space gets filled with the defined background color.
      -------------------------------------------------------------------

      * brightness

      brightness($level)
      param: $level - (integer) -255 0 255 return: pim - (class handle) You can adjust brightness by defining a value between -255 and +255. Zero lets it unchanged, negative values results in darker images and positive values in lighter images.
      -------------------------------------------------------------------

      * contrast

      contrast($level)
      param: $level - (integer) -255 0 255 return: pim - (class handle) You can adjust contrast by defining a value between -255 and +255. Zero lets it unchanged, negative values results in lesser contrast and positive values in higher contrast.
      -------------------------------------------------------------------

      * grayscale

      grayscale()
      return: pim - (class handle) Turns an image into grayscale. Remove all colors.
      -------------------------------------------------------------------

      * sepia

      sepia()
      return: pim - (class handle) Turns the memory image into a colorized grayscale image with a predefined rgb-color that is known as "sepia".
      -------------------------------------------------------------------

      * colorize

      colorize($anyColor)
      param: $anyColor - (array) like css rgb or css rgba - but with values for rgb -255 - +255,  - value for alpha is float 0 - 1, 0 = transparent  1 = opaque return: pim - (class handle) Here you can adjust each of the RGB colors and optionally the alpha channel. Zero lets the channel unchanged whereas negative values results in lesser / darker parts of that channel and higher values in stronger saturisation of that channel.
      -------------------------------------------------------------------

      * negate

      negate()
      return: pim - (class handle) Turns an image into a "negative".
      -------------------------------------------------------------------

      * pixelate

      pixelate($blockSize=3)
      param: $blockSize - (integer) 1 - ??, default is 3 return: pim - (class handle) This apply the well known PixelLook to the memory image. It is stronger with higher values for blockSize.
      -------------------------------------------------------------------

      * emboss

      emboss()
      return: pim - (class handle) This apply the emboss effect to the memory image.
      -------------------------------------------------------------------

      * edgedetect

      edgedetect()
      return: pim - (class handle) This apply the edge-detect effect to the memory image.
      -------------------------------------------------------------------

      * getMemoryImage

      getMemoryImage()
      return: memoryimage - (GD-Resource) If you want apply something that isn't available with that class, you simply can check out the current memory image and apply your image - voodoo - stuff
      -------------------------------------------------------------------

      * setMemoryImage

      setMemoryImage($memoryImage)
      param: $memoryImage - (GD-Resource) return: pim - (class handle) If you are ready with your own image stuff, you can check in the memory image for further use with the class.
      -------------------------------------------------------------------

      * watermarkLogo

      watermarkLogo($pngAlphaImage, $position='center', $padding=2)
      param: $pngAlphaImage - mixed [systemfilepath or PageImageObject] to/from a PNG with transparency param: $position - (string) is one out of: N, E, S, W, C, NE, SE, SW, NW,
      - or: north, east, south, west, center, northeast, southeast, southwest, northwest
      default is 'center' param: $padding - (integer) 0 - 25, default is 5, padding to the borders in percent of the images length! return: pim - (class handle) You can pass a transparent image with its filename or as a PageImage to the method. If the watermark is bigger than the destination-image, it gets shrinked to fit into the targetimage. If it is a small watermark image you can define the position of it:
      NW - N - NE | | | W - C - E | | | SW - S - SE  
      The easiest and best way I have discovered to apply a big transparency watermark to an image is as follows:
      create a square transparent png image of e.g. 2000 x 2000 px, place your mark into the center with enough (percent) of space to the borders. You can see an example here! The $pngAlphaImage get centered and shrinked to fit into the memory image. No hassle with what width and / or height should I use?, how many space for the borders?, etc.
      -------------------------------------------------------------------

      * watermarkLogoTiled

      watermarkLogoTiled($pngAlphaImage)
      param: $pngAlphaImage - mixed [systemfilepath or PageImageObject] to/from a PNG with transparency return: pim - (class handle) Here you have to pass a tile png with transparency (e.g. something between 150-300 px?) to your bigger images. It got repeated all over the memory image starting at the top left corner.
      -------------------------------------------------------------------

      * watermarkText

      watermarkText($text, $size=10, $position='center', $padding=2, $opacity=50, $trueTypeFont=null)
      param: $text - (string) the text that you want to display on the image param: $size - (integer) 1 - 100, unit = points, good value seems to be around 10 to 15 param: $position - (string) is one out of: N, E, S, W, C, NE, SE, SW, NW,
      - or: north, east, south, west, center, northeast, southeast, southwest, northwest
      default is 'center' param: $padding - (integer) 0 - 25, default is 2, padding to the borders in percent of the images length! param: $opacity- (integer) 1 - 100, default is 50 param: $trueTypeFont - (string) systemfilepath to a TrueTypeFont, default is freesansbold.ttf (is GPL & comes with the module) return: pim - (class handle) Here you can display (dynamic) text with transparency over the memory image. You have to define your text, and optionally size, position, padding, opacity for it. And if you don't like the default font, freesansbold, you have to point to a TrueTypeFont-File of your choice.
      Please have a look to example output: http://processwire.com/talk/topic/4264-release-page-image-manipulator/page-2#entry41989
      -------------------------------------------------------------------





      PageImage Manipulator - Example Output


    • By d'Hinnisdaël
      Format Datetime fields as Carbon instances.
      You can find the latest release and the complete readme on Github.
      Installation
      composer require daun/datetime-carbon-format Usage
      All Datetime fields will now be formatted as Carbon instances instead of strings. Some examples:
      // $page->date is a Datetime field // Output format: j/n/Y echo $page->date; // 20/10/2020 echo $page->date->add('7 days'); // 27/10/2020 echo $page->date->format('l, F j'); // Monday, October 20 echo $page->date->year; // 2020 echo $page->date->diffForHumans(); // 28 minutes ago Frontend only
      The ProcessWire admin seems to expect datetime fields to be strings. This module will only return Carbon instances on frontend page views.
      Date output format
      When casting a Carbon instance to a string (usually when outputting the field in a template), the field's date output format will be respected.
      Links
      GitHub • Readme • Carbon docs
       
       
      PS. I remember reading about a Carbon module in a recent newsletter, but couldn't find it anywhere. Was that you, @bernhard?
    • By MoritzLost
      TrelloWire
      This is a module that allows you to automatically create Trello cards for ProcessWire pages and update them when the pages are updated. This allows you to setup connected workflows. Card properties and change handling behaviour can be customized through the extensive module configuration. Every action the module performs is hookable, so you can modify when and how cards are created as much as you need to. The module also contains an API-component that makes it easy to make requests to the Trello API and build your own connected ProcessWire-Trello workflows.
      Warning: This module requires ProcessWire 3.0.167 which is above the current stable master release at the moment.
      Features
      All the things the module can do for you without any custom code: Create a new card on Trello whenever a page is added or published (you can select applicable templates). Configure the target board, target list, name and description for new cards. Add default labels and checklists to the card. Update the card whenever the page is updated (optional). When the status of the card changes (published / unpublished, hidden / unhidden, trashed / restored or deleted), move the card to a different list or archive or delete it (configurable). You can extend this through hooks in many ways: Modifiy when and how cards are created. Modify the card properties (Target board & list, title, description, et c.) before they are sent to Trello. Create your own workflows by utilizing an API helper class with many convenient utility methods to access the Trello API directly. Feedback & Future Plans
      Let me know what you think! In particular:
      If you find any bugs report them here or on Github, I'll try to fix them. This module was born out of a use-case for a client project where we manage new form submissions through Trello. I'm not sure how many use-cases there are for this module. If you do use it, tell me about it! The Trello API is pretty extensive, I'll try to add some more helper methods to the TrelloWireApi class (let me know if you need anything in particular). I'll think about how the module can support different workflows that include Twig – talk to me if you have a use-case! Next steps could be a dashboard to manage pages that are connected to a Trello card, or a new section in the settings tab to manage the Trello connection. But it depends on whether there is any interest in this 🙂 Links
      Repository on Github Complete module documentation (getting started, configuration & API documentation) TrelloWire in the modules directory Module configuration

    • By David Karich
      ProcessWire InputfieldRepeaterMatrixDuplicate
      Thanks to the great ProModule "RepeaterMatrix" I have the possibility to create complex repeater items. With it I have created a quite powerful page builder. Many different content modules, with many more possible design options. The RepeaterMatrix module supports the cloning of items, but only within the same page. Now I often have the case that very design-intensive pages and items are created. If you want to use a content module on a different page (e.g. in the same design), you have to rebuild each item manually every time.
      This module extends the commercial ProModule "RepeaterMatrix" by the function to duplicate repeater items from one page to another page. The condition is that the target field is the same matrix field from which the item is duplicated. This module is currently understood as proof of concept. There are a few limitations that need to be considered. The intention of the module is that this functionality is integrated into the core of RepeaterMatrix and does not require an extra module.
      Check out the screencast
      What the module can do
      Duplicate multible repeater items from one page to another No matter how complex the item is Full support for file and image fields Multilingual support Support of Min and Max settings Live synchronization of clipboard between multiple browser tabs. Copy an item and simply switch the browser tab to the target page and you will immediately see the past button Support of multiple RepeaterMatrix fields on one page Configurable which roles and fields are excluded Configurable dialogs for copy and paste Duplicated items are automatically pasted to the end of the target field and set to hidden status so that changes are not directly published Automatic clipboard update when other items are picked Automatically removes old clipboard data if it is not pasted within 6 hours Delete clipboard itself by clicking the selected item again Benefit: unbelievably fast workflow and content replication What the module can't do
      Before an item can be duplicated in its current version, the source page must be saved. This means that if you make changes to an item and copy this, the old saved state will be duplicated Dynamic loading is currently not possible. Means no AJAX. When pasting, the target page is saved completely No support for nested repeater items. Currently only first level items can be duplicated. Means a repeater field in a repeater field cannot be duplicated. Workaround: simply duplicate the parent item Dynamic reloading and adding of repeater items cannot be registered. Several interfaces and events from the core are missing. The initialization occurs only once after the page load event Attention, please note!
      Nested repeaters cannot be supported technically. Therefore a check is made to prevent this. However, a nested repeater can only be detected if the field name ends for example with "_repeater1234". For example, if your MatrixRepeater field is named like this: "content_repeater" or "content_repeater123", this field is identified as nested and the module does not load. In version 2.0.1 the identification has been changed so that a field ending with the name repeater is only detected as nested if at least a two-digit number sequence follows. But to avoid this problem completely, make sure that your repeater matrix field does NOT end with the name "repeater".
      Changelog
       
      2.0.1
      Bug fix: Thanks to @ngrmm I could discover a bug which causes that the module cannot be loaded if the MatrixRepeater field ends with the name "repeater". The code was adjusted and information about the problem was provided 2.0.0
      Feature: Copy multiple items at once! The fundament for copying multiple items was created by @Autofahrn - THX! Feature: Optionally you can disable the copy and/or paste dialog Bug fix: A fix suggestion when additional and normal repeater fields are present was contributed by @joshua - THX! 1.0.4
      Bug fix: Various bug fixes and improvements in live synchronization Bug fix: Items are no longer inserted when the normal save button is clicked. Only when the past button is explicitly clicked Feature: Support of multiple repeater fields in one page Feature: Support of repeater Min/Max settings Feature: Configurable roles and fields Enhancement: Improved clipboard management Enhancement: Documentation improvement Enhancement: Corrected few typos #1 1.0.3
      Feature: Live synchronization Enhancement: Load the module only in the backend Enhancement: Documentation improvement 1.0.2
      Bug fix: Various bug fixes and improvements in JS functions Enhancement: Documentation improvement Enhancement: Corrected few typos 1.0.1
      Bug fix: Various bug fixes and improvements in the duplication process 1.0.0
      Initial release Support this module
      If this module is useful for you, I am very thankful for your small donation: Donate 5,- Euro (via PayPal – or an amount of your choice. Thank you!)
      Download this module (Version 2.0.1)
      > Github: https://github.com/FlipZoomMedia/InputfieldRepeaterMatrixDuplicate
      > PW module directory: https://modules.processwire.com/modules/inputfield-repeater-matrix-duplicate/
      > Old stable version (1.0.4): https://github.com/FlipZoomMedia/InputfieldRepeaterMatrixDuplicate/releases/tag/1.0.4
×
×
  • Create New...