Jump to content

Recommended Posts

20 minutes ago, kongondo said:

That's strange. Point #3 contradicts point #1. Media is only uploaded to that sub-folder if in the setting After Uploading you have selected option 3 (i.e., to keep media in a temporary folder until they have been reviewed). If you have option 1 or 2, the media is uploaded directly to the Media Library. Please confirm the option you have selected in this setting, just in case you are looking at a different setting from the one I am referring to, thanks.

Edit: Please also confirm that you have the latest version (005) Jquery File Upload

Files are uploaded to ..site/assets/MediaManager/jqfu/.files_no_show
Thumbnails are generated in ..site/assets/MediaManager/jqfu/.files_no_showthumbnails
This folder is empty: ..site/assets/MediaManager/uploads

Settings
After Uploading: Add uploads ... not publish (= option 2)

jQueryFileUpload: 0.0.5

Share this post


Link to post
Share on other sites
27 minutes ago, Metaphora said:

Files are uploaded to ..site/assets/MediaManager/jqfu/.files_no_show
Thumbnails are generated in ..site/assets/MediaManager/jqfu/.files_no_showthumbnails
This folder is empty: ..site/assets/MediaManager/uploads

Settings
After Uploading: Add uploads ... not publish (= option 2)

With these settings, the files should only be temporarily uploaded to /site/assets/MediaManager/jqfu/.files_no_show. They are then deleted once they have been copied to the Media Manager Library. The thumbnails also get deleted in that process.  However, if you upload very large images (dimensions or size), the process may time out. In that case you will get the error you are getting (Empty file upload result) . That means the server did not send back a success message in response to the ajax request sent by Jquery File Upload. If you check your browser dev tools as per the image below (under either Preview or Response tab), you should see a similar error. Is this the case for you?

 

media-manager-not-enough-memory-to-load-error.thumb.png.badbaa5e98369ff583defefa9ffe92ec.png

Edited by kongondo
correction

Share this post


Link to post
Share on other sites

"Solved" the problem.

1. Deleted all files in site/assets/MediaManager/jqfu/.files_no_show and thumbnails.

2. Upload a single image.

3. Image is successfully added.

4. Publish image.

5. No image in ..site/assets/MediaManager/jqfu/.files_no_show

As I said, everything was working fine until I tried to upload about 40 files at the same time.
This upload failed after 20 images or so (Empty file upload result).
After this I couldn't upload any file.

So I guess, the problem is caused by the files left behind in jqfu/.files_no_show.

 

Share this post


Link to post
Share on other sites
37 minutes ago, Metaphora said:

"Solved" the problem.

Glad you got it sorted. However, I feel there's still something funky going on. You should still be able to do bulk uploads. OK, maybe not 40 at a time, but 20 or so images. There's also a 'Scan' function if that suits you better.

Share this post


Link to post
Share on other sites

But let's say, an upload fails because of a memory issues ... shouldn't the  files in ..site/assets/MediaManager/jqfu/.files_no_show be automatically deleted?

Share this post


Link to post
Share on other sites
3 hours ago, Metaphora said:

But let's say, an upload fails because of a memory issues ... shouldn't the  files in ..site/assets/MediaManager/jqfu/.files_no_show be automatically deleted?

In that case, technically, the upload has not failed. Files have been uploaded to the temporary folder/../jqfu/.files_no_show. In there, a number of validation checks take place to ensure what is uploaded is valid. Some checks are done by (1) JQFU, others by  (2) ProcessWire's WireUpload and finally by (3) Media Manager. If a file passes validation, it is copied over to the library. Media Manager is responsible for deleting copies of uploaded media in the temporary folder. Since the process times out before reaching step #3, the uploaded media remain in the temporary folder, do not make it to the library, hence MM does not delete the uploaded originals in the temporary folder.

Share this post


Link to post
Share on other sites

Hi,

I've bought Media Manager before a few days and have a question: how can I add files to the media library via the api and how can I add media manager assets to a media manager field via the api? I'm importing a large Wordpress page and have to add a lot of files... 

Thank you, regards

Sebastian

Share this post


Link to post
Share on other sites

Hi @SebastianP,

Thanks for your purchase.

18 hours ago, SebastianP said:

how can I add files to the media library via the api and how can I add media manager assets to a media manager field via the api? I'm importing a large Wordpress page and have to add a lot of files... 

There is no external API to do this. You can have a look at the file MediaManagerActions.php  to see how we do it internally, specifically the methods actionInsert() (adding media to a Media Manager field on a page) and actionCreateMedia() (for creating media from uploaded files).  What is your import process? Do you have all the files available in some directory? Are you not able to import them using Media Manager upload feature?

Share this post


Link to post
Share on other sites

Thanks for your answer! Meanwhile I've imported the files manually ("new Page()... ") - the hint to the "actionInsert()"-method helps me with the rest:-) 

Are you not able to import them using Media Manager upload feature?

No - I want to rebuilt the existing wordpress posts (text, text with image, galleries and so on) with repeater items; so I must tag the files during the import with their ID from the wp_posts table. 

Share this post


Link to post
Share on other sites
2 hours ago, SebastianP said:

Meanwhile I've imported the files manually

Glad you got it sorted :).

Share this post


Link to post
Share on other sites

Hi @kongondo,

I've been getting to know this module and it's really impressive the features you've worked in and all the settings that can be customised.

Just wondering about the behaviour of the MM inputfield though - currently it reloads the whole of Page Edit with each addition to the field, which is not so good if the user has made some edits to other fields but not yet saved the page. They are faced with the option of accepting the reload which would lose the other field edits, or cancelling the reload in which case their media selection is not added.

Maybe you could look at how the PageTable inputfield reloads itself via AJAX when a change is made, and do something similar with the MM inputfield?

  • Like 2

Share this post


Link to post
Share on other sites

Media Manager version 011  (released 20/07/2017)

Happy to announce the latest release of Media Manager.

Changelog

  1. Fixed bug that caused required Media Manager fields to still be labelled as 'missing required value' even when they were populated.

Share this post


Link to post
Share on other sites

Hi @kongondo, I'm running into an issue with the module not displaying properly (screenshot attached).

Also, how can I redownload the module? I'm thinking maybe the module folder is corrupted?

Thanks!

5975ccf2e749a_ScreenShot2017-07-24at12_30_31.thumb.png.5a0182dc5f249593d659eef66e33fe4c.png

Share this post


Link to post
Share on other sites

Hi @onjegolders,

Thanks for your purchase.

Apologies about the issues you are having with the module.

8 hours ago, onjegolders said:

I'm thinking maybe the module folder is corrupted?

Probably. Please try and re-install. Check for any missing files using the Network Tab. The error you see in the console is a pesky one that I've never been able to decipher/get to the root of. For now, we live with it; it doesn't affect anything.

8 hours ago, onjegolders said:

how can I redownload the module?

Please check your email.

Thanks.

Share this post


Link to post
Share on other sites

Hi!

I am having trouble with images not being shown to other users that dont have  superuser role. All images were uploaded by superuser with id 41. 

I added media-manager permissions to the role in question, and then the role to the user, is this enough? Also the options of media manager are configured to show all user images. 

Share this post


Link to post
Share on other sites
31 minutes ago, elabx said:

is this enough?

Hi @elabx. No, it is not. You also need to set up permissions at the template level. This is described here.

Let me know if this helps.

Share this post


Link to post
Share on other sites
3 hours ago, kongondo said:

Hi @elabx. No, it is not. You also need to set up permissions at the template level. This is described here.

Let me know if this helps.

Oh thanks! Another brilliant example of RTFM.

Share this post


Link to post
Share on other sites

I am looking for a clean way to remove the "Media Manager" pages from the top search in the admin for a certain user role. When searching, these pages are being returned and confusing the user that they can edit them instead of using the Media Manager tool. Attached is an image to help describe what I mean. Make note of the page types "Media Manager: ect"

I was thinking a hook using ProcessPageSearch?

Any thoughts or suggestions are appreciated.

 

example

Share this post


Link to post
Share on other sites

This post has a perfect solution if anyone else need it. I will be glad to share my code if needed.

  • Like 2

Share this post


Link to post
Share on other sites
On 18/08/2017 at 8:28 PM, RyanJ said:

This post has a perfect solution if anyone else need it. I will be glad to share my code if needed.

Glad you found a solution. Thanks for helping others.

Share this post


Link to post
Share on other sites

Renewals and Resend Links

Hi,

Renewal and resend links pages for Media Manager have been added. Use renewals if you wish to renew a Media Manager order whose subscription has expired (1 year). Resend are for orders that are yet to expire. Use this if you can't find or didn't get the confirmation email sent after your purchase.

  • Like 1

Share this post


Link to post
Share on other sites

Hello,

I have a question about supported file formats -

I have added 'svg' to valid image file extensions, and this works when using the 'Scan' method to upload files. When I try the JqueryFileUploader, I get an error saying ' Filetype not allowed'

 

Is there any other configuration I need to change to allow svg files to be uploaded as images?

 

Thanks!

Share this post


Link to post
Share on other sites
22 hours ago, Tom H said:

Is there any other configuration I need to change to allow svg files to be uploaded as images?

Thanks for reporting @Tom H. Looking into it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tcnet
      PageViewStatistic for ProcessWire is a module to log page visits of the CMS. The records including some basic information like IP-address, browser, operating system, requested page and originate page. Please note that this module doesn't claim to be the best or most accurate.
      Advantages
      One of the biggest advantage is that this module doesn't require any external service like Google Analytics or similar. You don't have to modify your templates either. There is also no Javascript or image required.
      Disadvantages
      There is only one disadvantage. This module doesn't record visits if the browser loads the page from its browser cache. To prevent the browser from loading the page from its cache, add the following meta tags to the header of your page:
      <meta http-equiv="Cache-Control" content="no-cache, no-store, must-revalidate" /> <meta http-equiv="Pragma" content="no-cache" /> <meta http-equiv="Expires" content="0" /> How to use
      The records can be accessed via the Setup-menu of the CMS backend. The first dropdown control changes the view mode.

      Detailed records
      View mode "Detailed records" shows all visits of the selected day individually with IP-address, browser, operating system, requested page and originate page. Click the update button to see new added records.

      Cached visitor records
      View modes other than "Detailed records" are cached visitor counts which will be collected on a daily basis from the detailed records. This procedure ensures a faster display even with a large number of data records. Another advantage is that the detailed records can be deleted while the cache remains. The cache can be updated manually or automatically in a specified time period. Multiple visits from the same IP address on the same day are counted as a single visitor.

      Upgrade from older versions
      Cached visitor counts is new in version 1.0.8. If you just upgraded from an older version you might expire a delay or even an error 500 if you display cached visitor counts. The reason for this is that the cache has to be created from the records. This can take longer if your database contains many records. Sometimes it might hit the maximally execution time. Don't worry about that and keep reloading the page until the cache is completely created.
      Special Feature
      PageViewStatistic for ProcessWire can record the time a visitor viewed the page. This feature is deactivated by default. To activate open the module configuration page and activate "Record view time". If activated you will find a new column "S." in the records which means the time of view in seconds. With every page request, a Javascript code is inserted directly after the <body> tag. Every time the visitor switches to another tab or closes the tab, this script reports the number of seconds the tab was visible. The initial page request is recorded only as a hyphen (-).

      Settings
      You can access the module settings by clicking the Configuration button at the bottom of the records page. The settings page is also available in the menu: Modules->Configure->ProcessPageViewStat.
      IP2Location
      This module uses the IP2Location database from: http://www.ip2location.com. This database is required to obtain the country from the IP address. IP2Location updates this database at the begin of every month. The settings of ProcessPageViewStat offers the ability to automatically download the database monthly. Please note, that automatically download will not work if your webspace doesn't allow allow_url_fopen.
      Dragscroll
      This module uses DragScroll. A JavaScript available from: http://github.com/asvd/dragscroll. Dragscroll adds the ability in view mode "Day" to drag the records horizontally with the mouse pointer.
      parseUserAgentStringClass
      This module uses the PHP class parseUserAgentStringClass available from: http://www.toms-world.org/blog/parseuseragentstring/. This class is required to filter out the browser type and operating system from the server request.
    • By Mike Rockett
      TextformatterTypographer
      A ProcessWire wrapper for the awesome PHP Typography class, originally authored by KINGdesk LLC and enhanced by Peter Putzer in wp-Typography. Like Smartypants, it supercharges text fields with enhanced typography and typesetting, such as smart quotations, hyphenation in 59 languages, ellipses, copyright-, trade-, and service-marks, math symbols, and more.
      It's based on the PHP-Typography library found over at wp-Typography, which is more frequently updated and feature rich that its original by KINGdesk LLC.
      The module itself is fully configurable. I haven't done extensive testing, but there is nothing complex about this, and so I only envisage a typographical bug here and there, if any.
    • By robert
      I often had the need for an overview of all used fields and their contents for a specific page/template while developing new websites without switching to the backend, so I made a small module which lists all the needed information in a readable manner (at least for me):
      Debug Page Fields
      https://github.com/robertweiss/ProcessDebugPageFields
      It adds two new properties to all pages:
      $page->debugFieldValues – returns an object with all (sub-)fields, their labels, fieldtypes and values $page->debugFieldTypes – returns an object with all fieldtypes and their corresponding fields // List all values of a pages $page->debugFieldValues // List a specific field $page->debugFieldValues->fieldname // List all used fieldtypes of a page $page->debugFieldTypes I recommend using it in combination with Tracy Debugger, Ray, Xdebug etc. as it returns an object and is only meant for developing/debugging uses. 
      For now, the fieldtype support includes mostly fieldtypes I use in my projects, but can easily be extended by adding a new FieldtypeFIELDNAME method to the module. I use it with five different client installations (all PW 3.0.*), but of course there might be some (or more) field configurations which are not covered correctly yet.
      Supported fieldtypes
      Button Checkbox Color Combo Datetime Email FieldsetPage * File FontIconPicker Functional Image ImageReference MapMarker Multiplier Mystique Options Page PageIDs PageTitle Radio Repeater * RepeaterMatrix * RockAwesome SeoMaestro Table Text Textarea Textareas Toggle URL * The fields with complete subfield-support also list their corresponding subfields.
      Installation
      Download the zip file at Github or clone the repo into your site/modules directory. If you downloaded the zip file, extract it in your sites/modules directory. In your admin, go to Modules > Refresh, then Modules > New, then click on the Install button for this module. As this is my first ›public‹ module, I hope I did not miss any important things to mention here.
    • By horst
      Wire Mail SMTP

      An extension to the (new) WireMail base class that uses SMTP-transport

      This module integrates EmailMessage, SMTP and SASL php-libraries from Manuel Lemos into ProcessWire. I use this continously evolved libraries for about 10 years now and there was never a reason or occasion not to do so. I use it nearly every day in my office for automated composing and sending personalized messages with attachments, requests for Disposition Notifications, etc. Also I have used it for sending personalized Bulkmails many times.

      The WireMailSmtp module extends the new email-related WireMail base class introduced in ProcessWire 2.4.1 (while this writing, the dev-branch only).
       
      Here are Ryans announcement.



      Current Version 0.6.0
      Changelog: https://github.com/horst-n/WireMailSmtp/blob/master/CHANGELOG.md
      get it from the Modules Directory Install and Configure

      Download the module into your site/modules/ directory and install it.

      In the config page you fill in settings for the SMTP server and optionaly the (default) sender, like email address, name and signature.
      You can test the smtp settings directly there. If it says "SUCCESS! SMTP settings appear to work correctly." you are ready to start using it in templates, modules or bootstrap scripts.


      Usage Examples
      The simplest way to use it:
      $numSent = wireMail($to, $from, $subject, $textBody); $numSent = wireMail($to, '', $subject, $textBody); // or with a default sender emailaddress on config page This will send a plain text message to each recipient.
       
      You may also use the object oriented style:
      $mail = wireMail(); // calling an empty wireMail() returns a wireMail object $mail->to($toEmail, $toName); $mail->from = $yourEmailaddress; // if you don't have set a default sender in config // or if you want to override that $mail->subject($subject); $mail->body($textBody); $numSent = $mail->send(); Or chained, like everywhere in ProcessWire:
      $mail = wireMail(); $numSent = $mail->to($toEmail)->subject($subject)->body($textBody)->send(); Additionaly to the basics there are more options available with WireMailSmtp. The main difference compared to the WireMail BaseClass is the sendSingle option. With it you can set only one To-Recipient but additional CC-Recipients.
      $mail = wireMail(); $mail->sendSingle(true)->to($toEmail, $toName)->cc(array('person1@example.com', 'person2@example.com', 'person3@example.com')); $numSent = $mail->subject($subject)->body($textBody)->send(); The same as function call with options array:
      $options = array( 'sendSingle' => true, 'cc' => array('person1@example.com', 'person2@example.com', 'person3@example.com') ); $numSent = wireMail($to, '', $subject, $textBody, $options); There are methods to your disposal to check if you have the right WireMail-Class and if the SMTP-settings are working:
      $mail = wireMail(); if($mail->className != 'WireMailSmtp') { // Uups, wrong WireMail-Class: do something to inform the user and quit echo "<p>Couldn't get the right WireMail-Module (WireMailSmtp). found: {$mail->className}</p>"; return; } if(!$mail->testConnection()) { // Connection not working: echo "<p>Couldn't connect to the SMTP server. Please check the {$mail->className} modules config settings!</p>"; return; }  
      A MORE ADVANCED DEBUG METHOD!
      You can add some debug code into a template file and call a page with it:
      $to = array('me@example.com'); $subject = 'Wiremail-SMTP Test ' . date('H:i:s') . ' äöü ÄÖÜ ß'; $mail = wireMail(); if($mail->className != 'WireMailSmtp') { echo "<p>Couldn't get the right WireMail-Module (WireMailSmtp). found: {$mail->className}</p>"; } else { $mail->from = '--INSERT YOUR SENDER ADDRESS HERE --'; // <--- !!!! $mail->to($to); $mail->subject($subject); $mail->sendSingle(true); $mail->body("Titel\n\ntext text TEXT text text\n"); $mail->bodyHTML("<h1>Titel</h1><p>text text <strong>TEXT</strong> text text</p>"); $dump = $mail->debugSend(1); } So, in short, instead of using $mail->send(), use $mail->debugSend(1) to get output on a frontend testpage.
      The output is PRE formatted and contains the areas: SETTINGS, RESULT, ERRORS and a complete debuglog of the server connection, like this one:
       
      Following are a ...


      List of all options and features


      testConnection () - returns true on success, false on failures


      sendSingle ( true | false ) - default is false

      sendBulk ( true | false ) - default is false, Set this to true if you have lots of recipients (50+)


      to ($recipients) - one emailaddress or array with multiple emailaddresses

      cc ($recipients) - only available with mode sendSingle, one emailaddress or array with multiple emailaddresses

      bcc ($recipients) - one emailaddress or array with multiple emailaddresses

       
      from = 'person@example.com' - emailaddress, can be set in module config (called Sender Emailaddress) but it can be overwritten here

      fromName = 'Name Surname' - optional, can be set in module config (called Sender Name) but it can be overwritten here


      priority (3) - 1 = Highest | 2 = High | 3 = Normal | 4 = Low | 5 = Lowest

      dispositionNotification () or notification () - request a Disposition Notification


      subject ($subject) - subject of the message

      body ($textBody) - use this one alone to create and send plainText emailmessages

      bodyHTML ($htmlBody) - use this to create a Multipart Alternative Emailmessage (containing a HTML-Part and a Plaintext-Part as fallback)

      addSignature ( true | false ) - the default-behave is selectable in config screen, this can be overridden here
      (only available if a signature is defined in the config screen)

      attachment ($filename, $alternativeBasename = "") - add attachment file, optionally alternative basename


      send () - send the message(s) and return number of successful sent messages


      debugSend(1) - returns and / or outputs a (pre formatted) dump that contains the areas: SETTINGS, RESULT, ERRORS and a complete debuglog of the server connection. (See above the example code under ADVANCED DEBUG METHOD for further instructions!)


      getResult () - returns a dump (array) with all recipients (to, cc, bcc) and settings you have selected with the message, the message subject and body, and lists of successfull addresses and failed addresses,


      logActivity ($logmessage) - you may log success if you want

      logError ($logmessage) - you may log warnings, too. - Errors are logged automaticaly
       
       
      useSentLog (true | false) - intended for usage with e.g. third party newsletter modules - tells the send() method to make usage of the sentLog-methods - the following three sentLog methods are hookable, e.g. if you don't want log into files you may provide your own storage, or add additional functionality here

      sentLogReset ()  - starts a new LogSession - Best usage would be interactively once when setting up a new Newsletter

      sentLogGet ()  - is called automaticly within the send() method - returns an array containing all previously used emailaddresses

      sentLogAdd ($emailaddress)  - is called automaticly within the send() method
      Changelog: https://github.com/horst-n/WireMailSmtp/blob/master/CHANGELOG.md
       
       
    • By Cybermano
      Food Allergens Module
      A simple List of Food Allergens
      My needs were to provide a simple list of food allergens for our clients with restaurant related activity.
      The idea was to simply output the list (to speed up the data entry) without leaving the food menu editing, eg. opening another page in new tab or window.
      This isn't a perfect solution, but it works fine for my needs and I decided to share the base idea.
      This could also be easily used to show little notes or short "vademecum", not only for the list of food allergens.
      ---
      Main features
      The basis
      All moves from a short editing of the module in this tutorial: How to create custom admin pages by @bernhard
      First of all it creates an empty admin page, with a dedicated permission to let safe-user to see it (this permission has to be created as a new ones, manually or by the module).
      Once the page is created, I have hooked its behaviour into the ready.php, to show the content (basically a list).
      A step further
      With the tips of  @bernhard, @Soma (and many others), see here , the magic happens. 
      The new page will be shown as a panel, so editors will not abandon their data entry to have a quick view to the list.
      A little further
      Why scroll to the top of the page to click a link?
      The next step was to create a sticky button only in the food menu pages.
      Again with a @bernhard tip I moved into the customization of this simple module and the related hook.
      ---
      How to use this module
      After installed, it creates the page /admin/page/allergens/ and the module is to be setted up. The first field is a CKEditor with multi-language. This is the place where to write the informations that will be shown into the page. The next field is a simply text-area where to place a bit of JS that will be appended to the markup of the text (omit the 'script' tags). I also putted a checkbox with a silly statement: this to think at least twice on the safety of the written JS. Now comes the first way to display the link to the page
      Field Note with Link. Enable and save it. The module will display a new row with 4 selects (1 standard and 3 ASM):
      View mode (to show the page as Panel or as Modal PopUp); Templates to select: select one or more and save before proceed, so the  asm-select of the pages will be populated showing all the pages of the selected templates. Pages to select: also here select at least one and save before proceed to populate the asm-select for fields only with the ones that belong to the selected pages. Select the fields where to place the note and save again. That's all: now you will find into the notes of the selected fields the link "See the List of Allergens".
      At the same way, the option for the sticky button, but with a plus
      The field select is obviously unnecessary, but you could play with the last row: the inline styles to fix your sticky button where you like. Here you could set the sticky position of the <div> and the absolute ones of the <a>.

      Video Explanation
      In these screencasts you could see a custom JS that show a "copy" button near a "hanna-code" call.
      This because I've set a specific one for each allergen to show up a tooltip in the front end.

      Registrazione #33.mp4  

      Registrazione #34.mp4 ---
      Last but not the least
      Actually it works fine for my needs, even if it's much improvable: I'm working on the permissions creation, the uninstall section, a separate configs and defaults and how to include the hook into the module leaving free the ready.php. According to a simpler uninstall. Also I would make the link text as a dynamic text field, so it will be more flexible.
      I always learn a lot here, so I would share my code for whom it could be interested.
      I removed the hanna code references, but I provide you the html list of the allergens, English and Italian too, so you can paste them into the "source" of the CKEditor field to have a ready to use module.
      Obviously you are free to modify the code as per your needs.
      Please, keep in mind that I'm not a pro coder and I beg your pardon for my verbosity (speaking and coding). 😉
      I hope be helpful or for inspiration.
      Bye
      ready.phpList-ITA.htmlList-ENG.htmlAllergens.module
      README.md
×
×
  • Create New...