Jump to content
kongondo

Module: RuntimeMarkup Fieldtype & Inputfield

Recommended Posts

On 4/21/2018 at 12:39 AM, adrian said:

Is there any reason they can't just return true, rather than returning $this->renderMarkup($page, $field); ?

Hi @adrian,

 ___wakeupValue is needed for frontend access. I am assuming some people use the field in the frontend.   ___sleepValue should be able to work with return true only. I'll have to investigate deeper though. The whole module is based on Ryan's concat field. These methods were copied as is (or almost) from that module. So, his module must be having the same issues then.

I'll have a look sometime. Still no ETA though, sorry.

Edited by kongondo
  • Like 2

Share this post


Link to post
Share on other sites

Taking a further look, I agree that wakeupValue is needed in case someone does use on the frontend, but I can't see a need for loadPageField() - so if it was limited to just wakeupValue then it would reduce processing of the code to just once.

  • Like 2

Share this post


Link to post
Share on other sites
On 3/16/2018 at 4:30 PM, adrian said:

I am noticing that the renderMarkup() method is called many times on the currently edited page and it's also called on page reference fields on the page being edited. This makes for a lot of calls to this method that don't seem necessary as far as I can tell. Do you think this can be improved?

As an example, I put: bd($page->id); at the top of that method and saw this:

@adrian,

I have tested and cannot replicate this. I tested with both single and multi page reference fields using different inputs (Asm, Checkboxes, etc). I also tested using render via code and via wire('files')->render('some-file'). This is what I get if I put bd($page->id) at the top of renderMarkup().

rm-dump-tracy.png.1513da23878639171af413146d9e11b2.png

1367 is the ID of the page being edited. The pages saved in the page reference fields are not called.

Edit

I think there is something else going on in your install. There is nothing peculiar about the field. Apart from renderMarkup(), all the other methods are ProcessWire Field methods. Theoretically, it means if a bug exists, then all Fields should be exhibiting the same behaviour.

 

Edited by kongondo
  • Like 1

Share this post


Link to post
Share on other sites
11 hours ago, adrian said:

but I can't see a need for loadPageField() - so if it was limited to just wakeupValue then it would reduce processing of the code to just once.

loadPageField() is required to stop the field from visiting the database. There is a comment right there in the method :).

Quote

// generate value at runtime rather than loading from DB

If we remove the method, it will just call its parent loadPageField() (Fieldtype.php). Hence, we override it. We can have it return true. That results in renderMarkup() being called once only (rather than twice currently - once each for wakeupValue() and loadPageField()).

Edited by kongondo

Share this post


Link to post
Share on other sites

I've tried to change the title of the page and it works

$page->set('title', 'New title');
$page->save();
return "";

but when I try to change an inputfield of type text it doesn't

$page->my_field = '22223333';
// $page->my_field->attr('value', '22223333'); neither works
$page->save();
return "";

any advice, thanks.

Share this post


Link to post
Share on other sites

Using Runtimemarkup I've tried to change the title of the page and it works

$page->set('title', 'New title');
$page->save();
return "";

but when I try to change an inputfield of type text it doesn't

$page->my_field = '22223333';
// $page->my_field->attr('value', '22223333'); neither works
$page->save();
return "";

any advice, thanks.

Share this post


Link to post
Share on other sites

Thanks flydev, is not the case, but give this module a try  it opens up a new world.

Share this post


Link to post
Share on other sites

I created a new field and you're right it works, I'll check it thoroughly, many thanks.

  • Like 1

Share this post


Link to post
Share on other sites

Is any way to get the value of a field (Runtimemarkup) from a template :

$out .= strtoupper(dechex(strtotime(date("Y-m-d H:i:s", $page->created))));
return $out;

 

I'm getting the following error:

Field 'code_codigo' is runtime and not queryable

Share this post


Link to post
Share on other sites

Looking at the code, it seem not :

public function getMatchQuery($query, $table, $subfield, $operator, $value) {
		// we don't allow this field to be queried
		throw new WireException("Field '{$query->field->name}' is runtime and not queryable");
}

 

  • Like 1

Share this post


Link to post
Share on other sites

@Manol,

It seems your question has been answered?

Moderator Note

Please don't start different topics about the same issue. Also, use this module's support forum for all questions related to it. I have merged your other topic here.

 

Edited by kongondo

Share this post


Link to post
Share on other sites
1 hour ago, Manol said:

Is any way to get the value of a field (Runtimemarkup) from a template :

Yes you can get the value. See the examples in the first page, first post of this topic. However, you cannot use a selector to query the value.

1 hour ago, flydev said:

Looking at the code, it seem not :

Yes, you cannot use a selector to query it, but you can access the value.

Edited by kongondo
  • Like 1

Share this post


Link to post
Share on other sites
On 7/23/2017 at 3:04 PM, kongondo said:

For frontend, only pasted PHP code option is supported. My take is that this module is primarily used for the backend. Use of the render files option is geared for creating complex and/or more flexible backend apps as opposed to frontend usage. I have no intention of changing this behaviour.

Would be nice if it is consistent – I use this Field for both, backend and frontend and would love to have the code inside php files.

Share this post


Link to post
Share on other sites
1 hour ago, Noel Boss said:

Would be nice if it is consistent – I use this Field for both, backend and frontend and would love to have the code inside php files.

@Noel Boss see the dev version

Share this post


Link to post
Share on other sites
On 6/4/2018 at 6:21 PM, Macrura said:

the dev version

This is the description for the dev version. Did not work for me. Ended up with the master and:

namespace Processwire;
return wireRenderFile('fields/'.$field->name, ['page' => $page]);

 

Share this post


Link to post
Share on other sites
51 minutes ago, Noel Boss said:

This is the description for the dev version. Did not work for me. Ended up with the master and:


namespace Processwire;
return wireRenderFile('fields/'.$field->name, ['page' => $page]);

 

whatever version i'm using works great and has the option to use files and not pasted code, in the field config.. i thought it was the dev branch.. very stable and i have it running on 5 projects now, basically this is a completely indispensable module, i usually end up with on average 10-15 RM fields on any given project..

  • Like 1

Share this post


Link to post
Share on other sites
On 6/6/2018 at 5:06 PM, Macrura said:

basically this is a completely indispensable module

True, it's a great module. But does it work for you in the frontend with files? Because as @kongondo said here:

 

Quote

For frontend, only pasted PHP code option is supported.

 

  • Like 1

Share this post


Link to post
Share on other sites
6 hours ago, Noel Boss said:

This is the description for the dev version. Did not work for me. Ended up with the master and:


namespace Processwire;
return wireRenderFile('fields/'.$field->name, ['page' => $page]);

 

Works fine for me here with the dev version, but should also work with the master version (IIRC - sorry, it's been a while since I touched this). Tested in PW 3.0.85. Here's my copy pasted PHP code:

// both of these work
/*namespace Processwire;
return wireRenderFile('runtime-markup-wirerender-test');
*/
return ProcessWire\wireRenderFile('runtime-markup-wirerender-test');

The above allows you to have your code inside PHP files. This is the pasted PHP option. It is supported in both front- and back-end. It also allows you to use PHP files, but indirectly. It is not to be confused by the other (currently dev) option of directly rendering PHP files (i.e., just stating name of the PHP file and its path.

Are you getting any errors? Tracy?

In the template file I echo the field's value like so:

 

echo $page->runtime_markup;

 

Edited by kongondo

Share this post


Link to post
Share on other sites

Hi @kongondo 

No, this works just fine. But this is "pasted PHP code" – since you introduced the option to specify files on the dev Version, it would be nice to use this option also in the frontend;

Current status:

Dev Version:

– include files using module: Backend √ + Frontend X
– Past Code: Backend √ + Frontend √

Master Version:

– Include files using module: Backend X + Frontend X
– Past Code: Backend √ + Frontend √

Desired status 😉

Master Version:

– include files using module: Backend √ + Frontend √
– Past Code: Backend √ + Frontend √

Share this post


Link to post
Share on other sites
1 hour ago, Noel Boss said:

No, this works just fine. But this is "pasted PHP code" – since you introduced the option to specify files on the dev Version, it would be nice to use this option also in the frontend;

OK. I'll have a look. Could you please file it as a request on GitHub? It will help remind me, thanks.

  • Like 1

Share this post


Link to post
Share on other sites

Thank you Kogondo! BTW, this is one of the most useful Modules out there! Thank you for developing it!

  • Like 1

Share this post


Link to post
Share on other sites

Thank you for developing this useful module, now i can send email to certain user from admin easily, inspired from here :

For those who need more explanation:
Button is actually <a href> to template which will open new page (yes very ugly behaviour, read below) contain custom php code , not inside <form> action because <form> not allowed inside textarea.

To prevent opening new page when click the button, make an <iframe> inside the template as a target button, that's it, beautifully execution like native form in admin page.
 

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By joshua
      This module is (yet another) way for implementing a cookie management solution.
      Of course there are several other possibilities:
      - https://processwire.com/talk/topic/22920-klaro-cookie-consent-manager/
      - https://github.com/webmanufaktur/CookieManagementBanner
      - https://github.com/johannesdachsel/cookiemonster
      - https://www.oiljs.org/
      - ... and so on ...
      In this module you can configure which kind of cookie categories you want to manage:

      You can also enable the support for respecting the Do-Not-Track (DNT) header to don't annoy users, who already decided for all their browsing experience.
      Currently there are four possible cookie groups:
      - Necessary (always enabled)
      - Statistics
      - Marketing
      - External Media
      All groups can be renamed, so feel free to use other cookie group names. I just haven't found a way to implement a "repeater like" field as configurable module field ...
      When you want to load specific scripts ( like Google Analytics, Google Maps, ...) only after the user's content to this specific category of cookies, just use the following script syntax:
      <script type="text/plain" data-type="text/javascript" data-category="statistics" data-src="/path/to/your/statistic/script.js"></script> <script type="text/plain" data-type="text/javascript" data-category="marketing" data-src="/path/to/your/mareketing/script.js"></script> <script type="text/plain" data-type="text/javascript" data-category="external_media" data-src="/path/to/your/external-media/script.js"></script> <script type="text/plain" data-type="text/javascript" data-category="marketing">console.log("Inline scripts are also working!");</script> The type has to be "optin" to get recognized by PrivacyWire, the data-attributes are giving hints, how the script shall be loaded, if the data-category is within the cookie consents of the user. These scripts are loaded asynchronously after the user made the decision.
      If you want to give the users the possibility to change their consent, you can use the following Textformatter:
      [[privacywire-choose-cookies]] It's planned to add also other Textformatters to opt-out of specific cookie groups or delete the whole consent cookie.
      You can also add a custom link to output the banner again with a link / button with following class:
      <a href="#" class="privacywire-show-options">Show Cookie Options</a> <button class="privacywire-show-options">Show Cookie Options</button> This module is still in development, but we already use it on several production websites.
      You find it here: PrivacyWire Git Repo
      Download as .zip
      I would love to hear your feedback 🙂
      CHANGELOG
      0.1.1 Debugging: fixed error during uninstall 0.1.0 Added new detection of async scripts for W3C Validation 0.0.6 CSS-Debugging for hiding unused buttons, added ProCache support for the JavaScript tag 0.0.5 Multi-language support included completely (also in TextFormatter). Added possibility to async load other assets (e.g. <img type="optin" data-category="marketing" data-src="https://via.placeholder.com/300x300">) 0.0.4 Added possibility to add an imprint link to the banner 0.0.3 Multi-language support for module config (still in development) 0.0.2 First release 0.0.1 Early development
    • By bernhard
      --- Please use RockFinder3 ---
    • By MoritzLost
      Cacheable Placeholders
      This module allows you to have pieces of dynamic content inside cached output. This aims to solve the common problem of having a mostly cacheable site, but with pieces of dynamic output here and there.  Consider this simple example, where you want to output a custom greeting to the current user:
      <h1>Good morning, <?= ucfirst($user->name) ?></h1> This snippet means you can't use the template cache (at least for logged-in users), because each user has a different name. Even if 99% of your output is static, you can only cache the pieces that you know won't include this personal greeting. A more common example would be CSRF tokens for HTML forms - those need to be unique by definition, so you can't cache the form wholesale.
      This module solves this problem by introducing cacheable placeholders - small placeholder tokens that get replaced during every request. The replacement is done inside a Page::render hook so it runs during every request, even if the response is served from the template cache. So you can use something like this:
      <h1>Good morning, {{{greeting}}}</h1> Replacement tokens are defined with a callback function that produces the appropriate output and added to the module through a simple hook:
      // site/ready.php wire()->addHookAfter('CachePlaceholders::getTokens', function (HookEvent $e) { $tokens = $e->return; $tokens['greeting'] = [ 'callback' => function (array $tokenData) { return ucfirst(wire('user')->name); } ]; $e->return = $tokens; }); Tokens can also include parameters that are parsed and passed to the callback function. There are more fully annotated examples and step-by-step instructions in the README on Github!
      Features
      A simple and fast token parser that calls the appropriate callback and runs automatically. Tokens may include multiple named or positional parameters, as well as multi-value parameters. A manual mode that allows you to replace tokens in custom pieces of cached content (useful if you're using the $cache API). Some built-in tokens for common use-cases: CSRF-Tokens, replacing values from superglobals and producing random hexadecimal strings. The token format is completely customizable, all delimiters can be changed to avoid collisions with existing tag parsers or template languages. Links
      Github Repository & documentation Module directory (pending approval) If you are interested in learning more, the README is very extensive, with more usage examples, code samples and usage instructions!
    • By Craig
      I've been using Fathom Analytics for a while now and on a growing number of sites, so thought it was about time there was a PW module for it.
      WayFathomAnalytics
      WayFathomAnalytics is a group of modules which will allow you to view your Fathom Analytics dashboard in the PW admin panel and (optionally) automatically add and configure the tracking code on front-end pages.
      Links
      GitHub Readme & documentation Download Zip Modules directory Module settings screenshot What is Fathom Analytics?
      Fathom Analytics is a simple, privacy-focused website analytics tool for bloggers and businesses.

      Stop scrolling through pages of reports and collecting gobs of personal data about your visitors, both of which you probably don't need. Fathom is a simple and private website analytics platform that lets you focus on what's important: your business.
      Privacy focused Fast-loading dashboards, all data is on a single screen Easy to get what you need, no training required Unlimited email reports Private or public dashboard sharing Cookie notices not required (it doesn't use cookies or collect personal data) Displays: top content, top referrers, top goals and more
    • By daniels
      This is a lightweight alternative to other newsletter & newsletter-subscription modules.
      You can find the Module in the Modules directory and on Github
      It can subscribe, update, unsubscribe & delete a user in a list in Mailchimp with MailChimp API 3.0. It does not provide any forms or validation, so you can feel free to use your own. To protect your users, it does not save any user data in logs or sends them to an admin.
      This module fits your needs if you...
      ...use Mailchimp as your newsletter / email-automation tool ...want to let users subscribe to your newsletter on your website ...want to use your own form, validation and messages (with or without the wire forms) ...don't want any personal user data saved in any way in your ProcessWire environment (cf. EU data regulation terms) ...like to subscribe, update, unsubscribe or delete users to/from different lists ...like the Mailchimp UI for creating / sending / reviewing email campaigns *I have only tested it with PHP 7.x so far, so use on owners risk
      EDIT:
      Since 0.0.4, instructions and changelog can be found in the README only. You can find it here  🙂
      If you have questions or like to contribute, just post a reply or create an issue or pr on github, thanks!
×
×
  • Create New...